Moving Rows in ADF Table Using Drag and Drop

I implemented a drag and drop functionality it works fine, I want to accomplish the following functionality:
The user selects the rows and what if he drags the selected rows and wants to move to section beyond the limit of the table I want to scroll the table in the direction the user is dragging.
I think it should be a default behavior in the ADF table but it doesn't, could you please anyone tell me how to scroll the table while dragging the selected rows?
Thank you,

What make you think that this is a default behavior?
Adf tables a data bound. So the data appears in an order (mostly defined by a sort condition on the db).
Even if you implement this behavior (which is possible but hard to do) you loose the new order by the next round trip to the db.
You may try to use trinidad tables but then you don't have the drag & drop featur (I guess).
Timo

Similar Messages

Dynamic Table using drag and drop table columns

Hi,
I want to create an ADF table which allows me to insert new columns from the list of columns.
List of columns will be shown in the tree. I would like to drag a tree node to the table, table should highlight where i can drop the node.
Once, i drop it, table should get refreshed with new column at inserted location.
Is it possible? How?
Regards,
Suresh

Hi,
I don't think that a drop indicator is possible to create because the drag and drop is no from within the table but from external. You could add the drop target to the table and then determine the column that this is dropped onto. Based on this you can e.g. device to drop it to the right or left
Frank

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Programatic Generation and positioning of components using Drag and Drop

Hi,
I am relatively new to ADF and UI Designing. Im trying to generate a flowchart using drag and drop feature in ADF. This involves creation of dragging images such as start,decision .. etc from one panel to another and dynamically creating a flowchart.
Up to now i have managed to drag images from panel1 to panel2 and create them dynamically in the bean class. However im stuck at this point .. Im not able to position the draggable components on the desired position in the panelGroup. They either appear horizontally or vertically.
Is there any way to achieve this. Also is it possible to assign a dropTarget to a a target component which is created dynamically ?
Thanks in anticipation ....
Lyle

Hi Lyle,
I am too only 4 months old to adf ,i use jdeveloper 10g.
In 10g for the components to be placed at desired locations i think is somewhat possible. While you can arrange them by using spaces which causes
f:verbatim tag to appear or you can use ADF Faces Core items like Object Spacer and Object Seperator where you can set their length and width to space objects on page...
Regards
Rohit

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

Images resizing when using drag and drop

We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong? If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
jean @ buffaloworks

I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
Did you mean to say PSE 5 rather than 6? It worked normally there.

Transfering files using drag and drop to Nano P

I havent installed the supplied disks that came with my Nano Plus but am transfering files using drag and drop from "my music" folder on my computer to the Nano. These files are stored on my computer as the Name of the Artist as the folder name with a sub folder named the CD title (default setting when using Windows media to rip) with the individual track files in that folder.
When I drag the main folder over to my Nano it just displays the Album title on the screen but not by artist and there is no way to select by artist (you can just switch "folders" on the Nano which will then display the CD title. If I used the supplied software with my Nano to transfer the files will I be able to choose by artist, CD, Genre, etc or is this not a function of the Nano?
Is it best to just select the individual song tracks and throw them in one large group on the Nano and then it can figure out which artist, album, genre they belong to?

The player will only show directories that contain music files.
The behaviour you want is common on players that manage their content with a database (typically HD-based devices), but Creative's flash players don't work that way (and the software used on the host computer doesn't have any influence on this - the user interface is controlled by the player's firmware).

Moving answers in a quiz once they have been matched to a target in using drag and drop

Hi,
I am having a problem with some of my drag and drop quizzes that I'm wondering if anyone you might be able to help me with?
In some drag and drop quizzes I have created, using the Infosemantics drag and drop light widget in Captivate 5.5, I can move the answer after having matched it to a target but before submittting. Whereas in some quizzes I have created, the answers get stuck and do not let me move the answers after I have matched them to a target, even though I haven't submitted. This leaves me no choice but to clear all my answers and start again if I have made a mistake.
Please can you tell me how to enable the answers to move even after they have been placed on a target?

Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps.

Use drag and drop to sort data in report

Hello!
I found a good description to sort data in a Tabular Form per drag and drop.

Here is the url: Read Article - Drag &amp; Drop tabular form rows
It works fine if one follow the hint from Baki (For apex 4.2 one have to adapt a css class).
Afterwards I tried the same with an Interactive Report. It nearly works.
I once again had to adapt a css class.
I used the
apexir_WORKSHEET_DATA
class instead of the
uReportStandard
in the JavaScript for the Interactive Report.
Everything went fine. Except the "Save the Thing to the DB" issiu did not work.
The following code do not work (the "APEX_APPLICATION.G_FROWID.COUNT" is allways 0):
FOR i IN 1 .. APEX_APPLICATION.G_FROWID.COUNT
LOOP
UPDATE emp SET sort_order = i WHERE rowid = APEX_APPLICATION.G_FROWID(i);
END LOOP;
Does anybody know why?
Best thanks,
Ilb

Using drag and drop in remote desktop on windows server 2008

we running an application on windows server 2008 terminal services .. this application was support drag and drop functionality .. i understand that terminal services on windows 2008 is supported to drag and drop but is not happening !! even when i run remote desktop connection on this server the drag and the drop is not working !
i need to enable the drag and drop for windows 2008 terminal services ..
Thanks in advance

Hello Ayman,
If your requirement is to drag and drop files between local and remote sessions, Danny is right. Drag-and-drop feature is not supported in Windows Server 2008-based Terminal Server, which is a by-design behavior hard-coded in the current version of the Remote Desktop Protocol.
As a workaround, I recommend you to use copy-and-paste function instead of drag-and-drop. To enable the copy-and-paste between local and remote session, please enable the clipboard redirection in Windows Server 2008-based RDC. (In Windows Server 2003 environment, local drive redirection is needed.)
Hope it helps. Thanks.
Best Regards,
Lionel Chen

Unable to use "drag and drop function" from outlook

We are changing from Lotus to outlook and this has made a problem with getting pdf-files into OAWD directly .
Procedure was like this in Lotus
1. We get documents (FI, F-43, aso ) by email
2. We use OAWD function "drag and drop" , document is attached to a document type and workflow is triggered
3. We pick up documents from Business workplace , handle the document and send it to the approver (who earlier got it directly in their mailbox "lotus")
so far so good , everything worked well
Unfortunately we changed to outlook, non attached files can be "drag and dropped" into OAWD (I understand the part about outlook is showing links instead of "real" pdf and know this is part of the problem)
My question, it can not be possible that we have to manually save the documents/attached files from outlook into "desktop" to later use the drag and drop function?
I have read about the programms to solve problem , ex "inPuncto", but our experts says there will be problem with connector to workflow from OAWD.
I have my greatest doubts about that because this must be really two diffrent moduls, one for converting from outlook and the other must be unchange (undependent of the earlier procedure). SAP can not know from what program the documents will be dragged?
Suggestion about some OAWD-adaptor ?
Any suggestions about great solutions ?

it seems there is no way.
See note 1797073
Is there someone with a better solution?

Dragging Icons stops working after organizing using drag and drop. Why?

On the newest MBA (2013)
While organizing my music I was creating new folders within the artists' folder in order to seperate things into albums. sometimes when im dragging the songs into this newly created folder ( I drag them in like groups of 10 , really depends on the length of the album) the ability to drag any icon is completely gone. I can still highlight folders and icons but I can no longer move them at all ( using the three finger move on the mouse pad or by holding the click and dragging )
It only happens when I select and drag a few songs over to the folder and drop them in without waiting for that folder to open up.
This forces me to restart in order to be able to use OSX normally again.
Does anyone have any insight? Do I need to just wait for a new update ?

I found this by EvB on https://discussions.apple.com/thread/4830916
"Try this.
Open a Terminal and type the following commands:
cd /
sudo rmdir tmp
sudo ln -s tmp /private/tmp
If your tmp directory is not already there then the second command will give an error - just proceed to the third command in this case.
Once you have done this sequence, reboot the machine and see if your drag and drop is restored."
Not sure if this fixed the problem or if rebooting temerally fixed it again.
Nope did not fix it

Help with this ... using drag and drop

Hi guys,
I'm an intermediate user of Flash, but I'm stuck ... I'm
trying to see if I can recreate this page in Flash for a friend
(it's an awful site!):
Mannequin
There are two ways I thought I could do this ... as they've
done it, you cycle through the items, click on an item and it will
appear in a hierarchy on the mannequin ... or as I've tried to
attempt it, by dragging the item onto the mannequin.
This is EXTREMELY rough as I just wanted to see if it could
be done before designing it all, so it's stick men I'm afraid! I've
got two movieclips on the stage, one is the console and one is the
mannequin. The console contains items of clothing which are each
movieclips placed in their own frame, back and forward buttons and
an add button (ignore that button).
I've managed to set it up so that the item of clothing
duplicates and you can drag it onto the mannequin. I have two
problems ... the mannequin goes back to normal when I go through
the items in the console and the items in the console appear on top
of each other as you flick through (probably because of the
duplicatemovie command).
I want to be able to drag each item, establish a hierarchy on
the mannequin (e.g. so a jacket will go over a top) ... I've
searched this forum for drag and drop info and have seen references
to specifying a target, but I'm stuck. I've got a feeling I'm on
the right lines, but I've either laid it out wrong on the stage or
I'm missing a vital piece of actionscript ... Please can anyone
advise??? Thanks
Test Mannequin
Flash File

Hi,
It would help if you could give some more details:
- what are you trying to do (drag and drop a whole component, drag an item within a tree, or a table, drag an item from one component to another?)
- have you found the modules you need in the unbound modules?
- have you read the documentation about the drag and drop actions? can you say which parts you're having problems with? The documentation is here. You'll have to select the component you are interested in and locate the action "drag" and the action "drop" to read about the parameters required.
Best regards,
Alex

Moving Rows in ADF Table Using Drag and Drop

Similar Messages

Maybe you are looking for