Moving sequence back into ultrabeat

Hello. Admittedly, I am kind of a newbie with Logic so sorry if this is a simple question. I couldn't find the answer searching.
I created a sequence in ultrabeat and moved the pattern into the main logic sequence window. I closed ultrabeat and would like to re-open the sequence in ultrabeat to edit it.
It does not appear to open back up with the sequence loaded. Is there a way to re-open the sequence in ultrabeat to edit it?
Thanks!

can re-record a segment from the arrange window into ultrabeat

Similar Messages

  • Is there a way to import midi data BACK into ultrabeat?

    I'm sitting here arranging a new song, programming all the drums into ultrabeat.  I clicked on the drum sounds, expecting to keep everything that I've worked on - when to my surprise I realized it went back to every sample pattern.
    I have some sections already pasted into the arrange window - and yes, i can just copy them and move forward, but i haven't tweaked anything yet, and all the drums are the same volume blah blah blah.  Is there anyway to import a segment from the arrange window that were created with ultrabeat BACK into ultrabeat?

    No.
    But you haven't lost anything.  Velocities/grid placement can easily be adjuted in the piano roll.  The volume in UB's mixer, as well as any of the voices parameters don't care if UB is running it's sequencer or playing notes from a region.  Unless you are programming step automation ("yellow mode").

  • Corporate Outlook dumps moved messages back into inbox!!

    Ok guys, I am the farthest thing from an IT professional so take it easy with the replies and pretend you are talking to a 3 year old! LOL
    Anyway, I have been connected to our corporate enterprise service for almost a year and just recently in no particular time frame my outlook will dump already read and filed messages back into my inbox, no rhyme or reason, no particular emails or senders, not particular date - in fact I might get three from 1/1/09 and 10 dumped back in from 12/23/08 - some are even marked as un-read when I know for a fact they have been read!!  It does not happen every time I reconcile either - its VERY random.....so I have had to walk the aisle of shame and IT has disconnected me from the server!
    I rely heavily on being able to access my emails at all hours of the day and night (I am in insurance - dont say it, I already know! LOL) and cannot continue being disconnected and I also cannot deal with three weeks of random emails being dumped back into my inbox - it creates issues and a possible E&O for me and my company!
    Our IT dept has contacted their Blackberry rep and noone seems to know what the heck is going on - they blame the phone and the ISP, however since I have been disconnected it has solved a separate issue, my Blackberry is not dumping emails and my call log anymore which was happening all the time and to be honest was the least of my worries considering I had 100's of emails being pulled back into my inbox on a regular basis.
    PLEASE, PLEASE, PLEASE can anyone help me!!??

    Hi and welcome to the forums!
    I will skip all the insurance sales person jokes I know.
    BBjunkie99 wrote:
    Our IT dept has contacted their Blackberry rep and noone seems to know what the heck is going on - they blame the phone and the ISP, however since I have been disconnected it has solved a separate issue, my Blackberry is not dumping emails and my call log anymore which was happening all the time and to be honest was the least of my worries considering I had 100's of emails being pulled back into my inbox on a regular basis.
    Dumping (Your technical term) in this case meaning deleted?
    Go to options, select status, send the file free and file total (if available) numbers.
    I will check on your first problem with the mailbox.
    You are on a BES network, is that right?
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Moving photos back into iphoto from DVD back-up

    I have lost several hundred photos (through my own error). I have them backed up on DVD in the iphoto format. Iphoto recognizes the disk when I put it in.
    I'm wondering the best way to transfer these photos back onto my computer and into my iphoto library. Drag and drop?
    The thumbnails of the lost photos remain in my iphoto on my computer so I was thinking of rebuilding the thumbnail cache (which iphoto sometimes prompts me to do when I open it) before I import. (how would I do this?)
    Thanks!

    Just drag the disk image onto the Library icon in the left hand pane and your photos will be imported into the library in the Events and albums that they were in when you backed them up.
    But first I would delete those "damaged" photos from the library and then import from the disk. Use iPhoto's delete method so that you delete not only the thumbnail files but any related modified files. That will get rid of a lot of flotsam in the library.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • From Premiere to AE, then Back into Premiere

    I have edited some footage in Premiere and applied a bunch of effects to it by importing the sequence to AE. I now wish to export the resulting AE comp BACK into Premiere, but while it appears in the bin, it's not allowing me to drag it onto the timeline? Is there any way around this?

    You can't reimport AE composition with dynamically linked sequence back into PrPro. Similarly you can't replace a group of clips in PrPro timeline or a sequence, which already contains dynamically linked composition, with dynamically linked composition once again, 'cos that creates an infinite loop.
    If you want to bring your dynamically linked sequence back to PrPro, export digital intermediate out of AE and import it into PrPro.

  • Accidentally Moved Blackberry Messenger Into Wrong Folder - How Do I Move Back?

    Hi Guys, I accidentally moved Blackberry Messenger into the SMS and MMS Folder instead of just moving the icon around.
    Please advise how I move it out of this folder and back to the Home Screen?
    Thanks,
    PETER

    Scroll to the icon > press the Menu key > Move to Folder > and choose which one you would like it put in, Home Screen, if that is where you want it.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can you take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in.

    As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event.  Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.

    Apple doesn't make it easy to do what you want.  However, here's how I do it. 
    Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
    In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

  • I loaded my ipad photos from camera and all the pictures sorted by date.  Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files?

    I loaded my ipad photos from camera and all the pictures sorted by date.  I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files other than reloading all of them from camera?

    What version of iPhoto?
    Select one and rotate it. Then rotate it back. Does that make it appear? 
    A much better work flow is the keep the photos after importing.  Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
    LN

  • Color graded sequence won't export back into fcp as an xml or send to

    Hi,
    I've finished a film and graded it. when everything is rendered, I export using either send to or as an xml. Both stop at around 50%. on the xml I get the following report.
    I started out at a 20 min sequence then a ten minute sequence now I'm down to 5 minutes. i've got a 146 minute movie to grade and get back into fcp.
    Any help much appreciated.
    Cheers
    Peter
    Mon, Jul 20, 2009, 14:07 - Errors Found Importing moral conflict 15min sequence.xml
    <xmeml>: Unknown element <sourceprojecturl> encountered.( line 4 )
    <sequence>: Unable to create new <sequence>.( line 5 )
    <sequence>: Unable to create new <sequence>.( line 5 )
    <sequence>: Unable to create new <sequence>.( line 5 )

    The order of execution is confusing me.
    On your first attempt, you tried sending the entire 146 minute project, graded and rendered it. Correct?
    On Send To FCP, the XML failed... (hardly surprising)
    This is where I get lost. Are you creating new, shorter versions, grading them and attempting to round trip the short sequences? and... if this is so, how are you differentiating these from the original monster failure? Do you have new render directories, paths, XMLs? Once an XML has been sent, it must not be re-used or re-sent or it will start appearing as ambiguous clones with conflicting path references.
    And 146 minutes is too long for any single subject unless it is a remake of Warren Beatty's "Reds" or "Spending a little over two hours on a beach with Jessica Alba" so make it shorter... ;-P This is an undocumented feature of COLOR. No, really!
    jPo

  • [svn:fx-trunk] 13157: -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory .

    Revision: 13157
    Revision: 13157
    Author:   [email protected]
    Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
    Log Message:
    -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory.  the automation projects swcs will still get compiled into the automation directory.
    This should fix the build
    QE notes: make sure packaging is correct
    Doc notes: no
    Bugs: no
    Reviewer:no
    Tests run: checkintests, doc targets run
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_air/build.xml
        flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    Added Paths:
        flex/sdk/trunk/frameworks/libs/automation_agent.swc
        flex/sdk/trunk/frameworks/libs/qtp.swc
        flex/sdk/trunk/frameworks/libs/qtp_air.swc
    Removed Paths:
        flex/sdk/trunk/frameworks/libs/automation/

    Revision: 13157
    Revision: 13157
    Author:   [email protected]
    Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
    Log Message:
    -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory.  the automation projects swcs will still get compiled into the automation directory.
    This should fix the build
    QE notes: make sure packaging is correct
    Doc notes: no
    Bugs: no
    Reviewer:no
    Tests run: checkintests, doc targets run
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_air/build.xml
        flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    Added Paths:
        flex/sdk/trunk/frameworks/libs/automation_agent.swc
        flex/sdk/trunk/frameworks/libs/qtp.swc
        flex/sdk/trunk/frameworks/libs/qtp_air.swc
    Removed Paths:
        flex/sdk/trunk/frameworks/libs/automation/

  • Mac Mail keeps moving deleted emails back into inbox

    How to stop Mail from moving deleted messages back to inbox?

    I've had the same problem for several months. I can't archive emails to the archive folder. They keep moving back into the inbox. I have to keep moving them several times before they stay put.

  • I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • How do I move a user's sparse image BACK into the correct folder

    Please help if you can!
    I accidentally moved the sparse image connected to my administrator account into the 'shared' folder. (I was trying to confirm shared settings between users, and inadvertently moved the file.) There were no error messages or warnings, the file moved easily into the shared folder.
    After it was moved, I was unable to login to that user's desktop, and the only explanation is "...because there was an error." The only thing I can think of is that it's because of the moved sparse image for that user.
    But, I can't move it back. The computer won't allow me to move the file, and when I try to copy it to the appropriate folder I get an error message that there is not enough disk space. I tried creating a new administrator account, but that didn't work. I've tried changing the file-sharing settings, but nothing I've thought of doing has worked. I've tried turning off Fire Vault for that user, but I can't seem to do it from a different user account.
    If you have any ideas of how I could log into this user account, I would be very, very grateful. It's my main desktop, and I need access to the files located there!
    Please help!!

    Dear jsd2 and William,
    Thank you both so much for your help. I cannot tell you how much I appreciate both of you taking the time to help me figure out this problem.
    William - The Library folder was basically empty. It had some Quicktime preferences in it, but nothing else. The Terminal didn't even recognize it, and I actually couldn't delete through Terminal, but simply sent it to the trash. Even so, I couldn't log in the user account.
    jsd2 - I was able to log in as root and had no problems opening the sparseimage. I then copied all of the data to an external HD. Once that was finished I verified the sparseimage mounted disk, but there were no problems found. Even so, I repaired disk, but still no problems found. Even so, I couldn't log into the user account. I did get to the point where it asked for the master FireVault password (by entering the wrong password 3 or 4 times). It accepted the master password, but then it wouldn't let me change the password and login (the master password only led me to a new-password screen).
    So, after verifying that ALL of my data was safely on the external HD (including music, pictures, mailboxes, files, etc...), I deleted the user account and home folder for the account I was locked out of. Then, I created a new account, and manually transfered the necessary files back into the user folder. Then, I restarted my computer and breathed a huge sigh of relief when my wallpaper came up on the screen. About 98% of my settings are in tact. All music, pictures, files, and e-mails survived. Although I have to re-ad the actual e-mail accounts, all of the other account settings are there.
    I will leave the copied files on the external HD for at least a few days or a week to make sure nothing important is missing, then I will set up Time Machine and start making regular backups.
    So, thank again, both of you, for your invaluable help, which led to a successful, if somewhat roundabout, solution to this problem.
    Also, jsd2, I don't remember if I turned Fire Vault off when I upgraded or not. It seems to me that the directions said I should, and in which case I would have - but the upgrade wasn't recent, so I don't really remember. (Or rather - clearly I didn't, if what you say is true.) At the moment, FireVault is off for all accounts on this computer. I want to turn it back on, but, to be honest, I'm really scared to now....Since I don't know what caused the problem in the first place, I'm leery that if the problem hasn't been fixed I might end up in the same situation again. Although I hadn't had any problems before today, and I know that I must have done something in the 'sharing' settings that created the problem.

  • How can I move my mp3 songs back into iTunes?

    Can you help me???
    I accidently moved a group of MP3 files (songs) from my iTunes to the trash.  After doing a little research, I saw the suggestion of creating a folder on my desktop and dragging them from the trash to the new desktop folder.  So, I did that, and as far as I can tell, the songs are all in the folder on my desktop.  But when I try to drag the songs from the desktop folder to itunes, I get this message: 
    "Attempting to copy the disk Macintosh HD failed.  You do not have enough access privaleges for this operation." 
    This makes no sense to me.  This is my private computer so I should have all the privaleges I need to do anything, right? Anyway, can you help me move the songs back into iTunes?  I have iTunes 11.1.1.  Thanks!    

    marilyn4444 wrote:
    "Attempting to copy the disk Macintosh HD failed.  You do not have enough access privaleges for this operation." 
    This makes no sense to me.  This is my private computer so I should have all the privaleges I need to do anything, right? Anyway, can you help me move the songs back into iTunes?  I have iTunes 11.1.1.  Thanks!    
    It says you are trying to copy the "HD disk" so abviously not allowing that operation.
    Open iTunes and from the menu select File>Add to Library... then select the Desktop from the sidebar and pick the folder containing the songs > click 'Open'

  • How do I move a project from an external drive back into Imovie

    I recently bought an Iomega external hard drive to store documentary movies so that I wouldn't jam up my Imac's free space. However, after I moved an imovie/idvd project to it, and wanted to make changes, I could not move the project back into the Imac's drive. (It also would not burn from the external, giving me a multiplex error) When I tried to move the movie back into Imovie on the Imac it said Quicktime couldn't parse it. I saw various posts about parsing, but not about specifically about moving a project from an external drive. Can anyone offer any suggestions? It seems to me that I should be able to move a project back and forth without that much trouble.

    Sounds like you have a DVD format (MPEG-2) and not an iMovie Project file.
    The key phrases are "multiplex" and "parse". Both suggest MPEG-2 format when opened in QuickTime. It would also throw an error -2048 message if MPEG-2.
    But another issue could be the file format of the external drive. Most ship pre-formatted for the Windows OS's but a Mac user should format using HFS+ (and others). If you didn't format the drive before moving the large iMovie Project onto it it may have become severely fragmented if the external used FAT 16 or FAT 32 (very common) formats. They have a 2 or 4 GB file size limit, respectively and would have made your Project unreadable when moved back and forth.
    Use the Disk Utility app to find out the format of your external drive.

Maybe you are looking for