Moving the Connection Broker SQL database

Hi
I have a working RDS 2012R2 configured with high availability mode. I now need to move the RD Connection Broker SQL database to new SQL server. Can anyone please point to documentation that specifies how this might be done
Cheers
Laurie

Hi
Well I gave it go and moved to sql2012 and all seems OK. This is what I did
Copy the old DB to the new SQL server. Database file location was same on old and new server
Apply the permissions same as old SQL server
Logon to RDGATEWAY
Get/save the current settings by
Open PowerShell on RDgateway
Type ipmo remotedesktop
Type Get-RDConnectionBrokerHighAvailability. Save results
Used the following commandSet-RDDatabaseConnectionString -ConnectionBroker "RDGATEWAYSERVERFQDN"
-DatabaseConnectionString "DRIVER=SQL Server Native Client 11.0;SERVER=NEWSQLSERVER;Trusted_Connection=Yes; APP=Remote Desktop Services Connection Broker;Database=NAMEOFSQLDATABASE"
Detached old DB
Restarted RDGATEWAY server

Similar Messages

Moving the DPM 2012 SQL Database to another SQL Server

I have 2 DPM Servers running and I would like to move those SQL Dbs onto another SQL Server. I know during the install you can select whether or not you want to install SQL or use another instance, but I dont want to re-install the whole thing and start
over. Is there any easy way to do this?

Hi,
in my opinion, you can stop with this Walkthrough after step 6, dont think that you Need to do a sync or consistency check.
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Failed to open the connection. Details: [Database Vendor Code: 53 ]

I'm upgrading one of our applications from Visual Studio 2005 to 2010. In the process I'm also switching our reports to run using Stored Procedures instead of Tables/Views. Everything runs fine on development machines after all the migration work. On the server however, it does not work. And I am getting the error message ""
Server is Windows 2003 Server 32 bit. And yes, I have installed the latest runtimes version 13.0.2000.0 on the server. There have been no other changes on the server other than to switch the target framework on the website in question from .net 2 to .net 4, and then to modify the web.config file to remove references to the older Crystal Reports and replace with references to the newer version.
I've seen many other threads on this "failed to open the connection" errors but none of them are my problem except there is one post that remains unanswered where someone had the same Database Vendor Code 53. I don't know what that error means, spent a considerable amount of time researching that before asking this question.
Lastly, it appears that this error only happens when the report is pulling data from a Stored Procedure rather than Tables/Views. If I re-copy the previous reports, they still work.
The ODBC drivers haven't changed, nor should they. They are fully up to date on that server machine.
I can't think of anything else that would be indicative of anything other than this is a bug. Here is the error text as it shows up in the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/7/2011 3:49:50 PM
Event time (UTC): 12/7/2011 11:49:50 PM
Event ID: 38ce5b5487984e8aa8d2b84493d859a8
Event sequence: 17
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/739252194/Root-1-129677751941252500
    Trust level: Full
    Application Virtual Path: /
    Application Path: D:\Websites\ACE5\Clients\TST\
    Machine name: ACE1
Process information:
    Process ID: 5436
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: InternalException
    Exception message: Failed to open the connection.
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
PackSlipTST0 {638463B4-2196-492A-BD6E-9D82CB1862D5}.rpt
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName)
   at Distribution_PackingSlips_default.ExportPackingSlips(String CrystalReportPath, Boolean UseStoredProcedure)
   at Distribution_PackingSlips_default.Page_Load(Object sender, EventArgs e)
   at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)
   at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Failed to open the connection.
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
PackSlipTST0 {638463B4-2196-492A-BD6E-9D82CB1862D5}.rpt
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)

Lots of great info here, except for the database; MS SQL? Oracle? Etc?
Database Vendor Code 53 is an error code that the CR engine simply passes straight from the database it's self. E.g.; look at your database error code and you should be able to find a verbose description of the error.
As a test, what happens if you add the report to your project and run it in the CR design part of the .NET IDE?
- A quick google search of Error 53 (for MS SQL - an assumption) comes up with a number of good hits. E.g.;
http://social.msdn.microsoft.com/Forums/en-AU/sqlgetstarted/thread/27684811-1a59-4273-b7ed-3cc990b4f20a
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Dec 8, 2011 6:31 AM

Failed to open the connection. Details: [Database Vendor Code: 12154].

I have installed Crystal reports server 2008 VI on a Windows 2008 64bit OS. I have added SQL server and Oracle reports through CMC. I then installed Oracle 10g client 32bit on the server and created and tested the required DSNs using ODBC 32bit. All the testings are successfull.
Now when I try to run my Oracle report through CMC it prompts for the parameters and when I enter them and click ok, gives me the following error:
Failed to open the connection. Details: [Database Vendor Code: 12154].
I have the same exact setup on a different server which has a 32 bit windows 2008 server OS and could run the same reports through CMC.
Is there away to fix this in the 64 bit OS?
I did a yahoo search and someone had a similar problem with Crystal RAS and Oracle.
And there is mentions that this is an issue with 32 bit ODBC drivers on 64bit wondows OS.The parentheses in the default file location, C:\Program Files (x86), causes problems with the ODBC driver and the workarouns in re-installing Crystal RAS on a different folder.
Full description is at (http://www.tririga.info/)
Is this the case with Crystal report server 2008 VI? I already got users using the InfoView to run SQL reports and doing this will have to put the application offline atlease for a say.
Any help is greatly appreciated.

Vasana,
Resolution: Failed to Open the Connection.
First:
If the Crystal Report is using 32-bit version of Microsoft ODBC then the Window 2008 server must also have 32-bit version of Microsoft ODBC. The 32- bit version of Odbcad32.exe is located in the %systemdrive%\Windows\SysWoW64 folder.
On the Windows 2008 server, execute Odbcad32.exe by clicking start and run and entering the following: C:\Window\SysWow64\ODBC32.exe.
Then:
The Windows 2008 server ODBC Data Source Administrator must have the same System Data Source Server and Database Names that is used to run the Crystal Report.
e.g. Crystal Report points to server ABC and database EFG (ABC_efg); then the ODBC connections on the Windows 2008 Server must also point to the same server ABC and database EFG (abc_efg) listed.

Failed to Establish Connection With SQL Database Server in Essbase studio

I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
Swathi

Thanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions?

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Essbase Error(1021001) Failed to Establish Connection With SQL Database...?

Hi there!
I am very new in Essbase and I am receiving the error message quoted below while trying to load data in a Cube. Weird thing is that we have checked all connections already and they are working correctly, however this process is still failing.
If someone can give us an idea to troubleshoot it, that would be really appreciated.
Thanks very much in advance for any help and regards!
MAXL> deploy data from model 'Production_GL_Cube_SchemaModel' in cube schema '\Production_GL\Cube_Schemas\Production_GL_Cube_Schema' login AdminUserAccount identified by MyPassword on host 'ServerName.MyCompany.com' to application 'ORA_HFM' database 'GL' overwrite values using connection 'ServerName' keep all errors on error ignore dataload write 'E:\Logs\DataLoad_Error_2013.04.19.16.23.00.txt';
BPM Connect Status: Success
Failed to deploy Essbase cube. Caused by: Failed to load data into database: GL. Caused by: Cannot get async process
state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
BPM maxl deployment ...failure.

Hi Celvin,
Thanks for your reply and my apologies for not coming back before on this issue.
For the benefit of other readers, after hours struggling with the issue, we focused our attention in the following portion of the ORA_HFM.log file:
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/54996/Info(1013157)
Received Command [Import] from user [Service_Acct@Native Directory] using [GL.rul] with data file [SQL]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021041)
Connection String is [DRIVER={DataDirect 6.1 Oracle Wire Protocol};Host=MyEssbaseServer01.MyCompany.com;Port=1521;SID=PRODUCTION;UID=...;PWD=...;ArraySize=1000000;]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021006)
SELECT Statement [SELECT cp_127."ACCT" AS "Accounts_CHILD",
         cp_127."PERIOD_MEMBER" AS "Period_CHILD",
         cp_127."PERIOD_YEAR" AS "Years_CHILD",
         'INPUT' AS "View_CHILD",
         cp_127."ENTITY" AS "Entity_CHILD",
         cp_127."PRODUCT_LINE" AS "Custom1_Product_CHILD",
         cp_127."Function" AS "Custom4_Function_CHILD",
         cp_127."B_U" AS "Business_Unit_ORACLEBUSINESS",
         cp_127."ORACLEFUNCTION" AS "Oracle_Function_CHILD",
         cp_127."LEGALENTITY" AS "Oracle_Entity_CHILD",
         'P' || cp_127."PRODUCTLINE" AS "Oracle_Product_CHILD",
         'A'[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021043)
Connection has been established
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021044)
Starting to execute query
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021014)
ODBC Layer Error: Native Error code [4063]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1003050)
Data Load Transaction Aborted With Error [1021001]
Then we concentrated in the following error message: *ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]*
So, we checked the database and noticed the schema and their views were damaged and -due to this- they lost all their properties (like data types, for example). So, we had to recompile all of them in order to avoid any loss of data. This was done in TOAD, as per the following info: https://support.quest.com/SolutionDetail.aspx?id=SOL66821
Finally, once all the views on this schema were rebuilt and fixed, we were able to deploy the Cube again.
Hope this help in the future. Cheers!!

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

Essbase Studio - Failed to Establish Connection With SQL Database Server

Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
Michelle

Michelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com

Can I connect Azure SQL Database from Project Siena ?

Can I connect Azure SQL Database from Project Siena ?
I want to connect Azure SQL Database of Office 365 SharePoint's Access App from Project Siena.
Access App's Database is Azure SQL Database.
and can connect to Excel/PowerBI/etc.
Access App's Database can connect from specific location / any locations.
Access App's Database can allow read-only connection / read-write connection.
I want to create Windows App connected to Access App's Database.
Regards,
Yoshihiro Kawabata.

Hi Yoshihiro,
Could you share more with us about the high level scenario for what you are trying to accomplish offline? We can discuss further at
[email protected]
Once we are done, we will definitely share our findings with the community.
Thanks!

Windows 7 clients suddenly unable to connect to SQL database

Our environment in a nutshell:
Server1: Small Business Server 2003 R2 (Active Directory domain, it is the sole domain controller [DC])
Server2: Dedicated to SQL Server 2005 and the SAP Business One database
Server3: Windows Server 2003 R2 Standard Terminal Server. This provides user sessions that are the equivalent of Windows XP SP3.
Two Windows 7 workstations: 1x 64-bit, 1x 32-bit. Both are domain joined.
All above computers on a gigabit LAN.
Client product is SAP Business One 2007 A (8.00.181) SP:00 PL:49
SQL Native Client is 9.00.5000.00
SQL Server is mixed-mode authentication, however all users use trusted Windows connections. All users with access to the product are members of an "SAP Users" domain security group.
Normal operation is:
Local Win7 workstations have client installed and connect over the LAN to the SQL Server instance on Server2
Remote users log on to the Server3 Terminal Server, fire up sessions and connect to the SQL Server instance
Up to and including Thursday, March 12 everything was working fine for all users. As of Friday, March 13 the Terminal Server users/sessions are still working perfectly but the Windows 7 workstations can no longer connect to the SQL Server instance with trusted connections. They are still able to connect if they switch to a SQL Server logon and use the "sa" user account and its password.
Also, the users normally using the Win7 workstations can log on to the Terminal Server with their usual domain accounts, and run SAP from there, which works perfectly.
The error the Windows 7 users are seeing:
Connection failed:
SQL State: 28000
SQL Server Error: 18452
[Microsoft][SQL Native Client][SQL Server]Login failed for user ". The user is not associated with a trusted SQL Server connection.
Prior to each logon attempt above, the Server2 SQL Server machine logs another event to its Application Event Log:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: xx.xx.xx.xx]
Source: SQL Server instance, event 17806. From SQL Server log, Severity 20, State 2
What I've tried so far:
All servers have been restarted in correct order
Running the client in Windows XP SP3 compatibility mode. No difference
Running the client as Administrator. No difference
Upgrading to SQL Server Native Client 11.0 via:
Uninstall B1 client
Uninstall v9.00 Native Client
Install v11.00 Native Client
Install B1 client
Net effect is no difference
Googling the event IDs that are being logged seems to point to:
Expired domain account. Manually checked that the 2 users accounts are not expired and they belong to the "SAP Users" group. Furthermore, the domain accounts are still working when used in Terminal Server sessions.
Problem with Service Primary Names (SPNs). This seems to be Active Directory-related. Again, the domain accounts normally used on the Win7 workstations work fine on the Terminal Server so I'm inclined to think AD is OK
Other information that may be useful:
No Windows updates applied between March 12 and 13 on either Win7 workstation
Both Win7 workstations running Microsoft Security Essentials and the native Windows 7 firewall
All servers running Trend Worry Free Business Security suite
Sorry about the length of the post but hopefully it will reduce wild goose chases. Any troubleshooting ideas greatly appreciated.

Problem found!
It turns out it was some sort of subtle problem with Trend antivirus running on the servers.
On all 3 servers there are 3 main protection components that are enabled by default:
Antivirus/Anti-spyware
Web Reputation
URL Filtering
What I did was to turn off all 3 components for all the servers. With Trend this can be done from the central management console. SAP then worked on one of the Win7 clients using Trusted Connection (i.e. Windows Authentication).
Then I turned the Trend components back on, on all servers, one at a time (to try to find which component was the culprit). Here’s the funny part: I turned all 3 back on, and SAP still works on the Win7 client using Windows Authentication! I even restarted it to make sure that state of affairs persists across a restart, and it’s still OK.
It's worth noting the problem was not solved shortly after it appeared by restarting all 3 servers. There was even a scheduled installation of Windows updates a couple of hours ago, which restarted all 3 servers again, and the problem still persisted. It was not fixed until the Trend components were globally disabled (on all 3 servers), then re-enabled.
Trend WBFS is version 9.0, pre SP1.

Can't connect to SQL Database using new login

I can connect to Azure SQL Database using the admin ID created when I set up the Azure account. Now I want to set up a different login that has only regular read/write privileges. I have followed the instructions on several web posts, to create
a login at the server level, then create a user at the database level from the login. When I try to connect, though, the connection fails. I get an error message, and a GUID that I am supposed to supply to MS tech support, except that all I have
is a standard Azure subscription, which does not include tech support.
Here is what I have done so far:
Logging in to the server with the admin account with SQL Mgmt Studio, I go to the master database on my Azure server, and create the login:
CREATE LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
This appears to work (password supplied is a "strong" password), or at least it doesn't show any error response.
Then, connecting to the production database in Azure, I set up a user and set permissions as follow:
CREATE USER clouduser1 FROM LOGIN clouduser@gxw8x04nlb;
EXEC sp_addrolemember 'db_datareader', 'clouduser1'
EXEC sp_addrolemember 'db_datawriter', 'clouduser1'
When I attempt to connect to Azure using the new login, however, I get an error message (from SQL Mgmt Studio as well as from MS Access). I am using the SQL Server Native Client 10.0.
The message is:
Connection failed:
SQLState '28000'
SQL Server Error 18456
[Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'clouduser'.
Connection failed:
SQLState: '01000'
SQL Server Error: 40608
[Microsoft][SQL Server Native Client 10.0][SQL Server]This session has been assigned a tracing ID of
'271851d5-8e94-497c-a332-d9d40682bb7a'. Provide this tracing ID to customer support when you need assistance.
Is there some missing step I need to do, to permit the login to see the database? I have looked for such in the various discussions about connection problems, but have not been able to find such a thing. Or extend more permissions to the new
user? Or specify a default user ID for a given login ? (as they do not have the same names, in the examples I have seen). I tried making the user ID the same as the login (w/o the server name), but that didn't seem to help, either.
I have done numerous web searches, and tried about every variation of login or user ID, password, etc. that I can think of, and all of them encounter the same error. It's got to be something very simple - clearly Azure supports more than one login
per database. But's that's all I have at the moment. That login connects just fine, but others won't, using the same PC, middleware, IP address, etc.
Any help would be much appreciated -
Thanks,
Doug

Olaf -
I noticed that, but all of the examples I have seen have Users named slightly differently from the Logins. I did try logging in with the Login name instead. No good. I tried making the Login and the User name the same (clouduser). Also
no good - same symptoms.
I think the problem is that the initial creation of the Login needs to be done WITHOUT the server name on the end.
Logged in to the master DB, I tried: Create LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
That didn't give me an error message, but I think it created a LOGIN of 'clouduser@gxw8x04nlb'. When
referenced from the outside world, I would need to specify 'clouduser@gxw8x04nlb@gxw8x04nlb'.
I tried deleting the logins, and then creating the login 'clouduser' in the Master DB. Then in
the application DB, I created User clouduser from LOGIN clouduser, and then assigned a role. That seems to work!
In my connection string, File DSN, etc. I still need to supply the login as 'clouduser@gxw8x04nlb'.
But when I am logged in to the server, and working in the Master DB or the application DB, I just refer to the Login as 'clouduser'.
Seems a little more complicated than it really should be, but at least I now have something that works.
Doug
Doug Hudson

Connecting to SQL database via an application deployed in Tomcat

Hi,
When the SQL database is restarted, the connection of the web application gets lost and the tomcat has to be restarted manually in order to reset connection with the database. Please let me know if there is a way by which the connection can be re-establised without manually restarting the tomcat.
Thanks and regards
Lipi

Hi Arut,
Below is the paragraph that is extracted from the
book:
“When connecting to a SQL Server database you cannot use Windows authentication or the SharePoint Server single sign-on service, named Secure Store Service(SSS). You are limited to using a SQL Server authentication user name and password, which are sent
over the network in plain text.”
So Windows authentication users are not supported to connect to SQL Server databases in SharePoint Designer.
As the error still occurs when you connect to SQL server with SQL server authentication users, I recommend to check if the SQL Server authentication method is set to be SQL Server and Windows Authentication mode and please make sure that the account has
permission to access SQL Server databases.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Yesterday I was able to connect Azure SQL Database - Today I am not

Hello Everyone,
I have problem with establishing connection with Azure SQL Database. I have read many articles here, tried some solutions but none worked.
0. On last Friday everything worked well - today it does not.
1. I added my public IP Address in Azure Management Portal earlier.
2. I tried different types of login-ways: login@nameserver, I used numeric addresses instead of server names, I set TCP connection manually, added encryption in one case either, tried do establish connection with particular database
3. Firewall does not block 1433 out connection
4. My IP address is static
5. I have no error message displayed using Microsoft SQL Server Management Studio - it just hangs.. - no response at all
6. I cannot ping the machine but its name is resolved correctly - maybe it does not respond using echo reply on purpose
7. Status of my database is Active - I am able to connect it and manage via browser and management portal at the moment
8. When I am trying to connect database via Visual Studio - it hangs.. - VS must be stopped manually via task manager
9. My local CloudService has problem with connection to the db either
10. Currently I am not able to deploy my CloudService because when I am trying to Publish it - VS hangs as soon as first Publish dialog window appears. Looks that I am able to deploy cloud service via Management portal only.
I am still trying to dive into the problem but at this moment I would be grateful for any clues.
Regards,

Hi Mekh, hi everyone
PROBLEM SOLVED.
Yestarday I updated Azure Firewall rule and database-level firewall rules (master, my_database). I added special input / output protocols (IP, TCP, UDP) rules to my COMODO firewall (MSSMS could send anything and receive anything using IP, TCP and UDP). Status
of my computer -> database connection was set to ESTABLISHED in netstat output but MSSMS was still unavailable (no response at all - no error message).
I DECIDED TO UNINSTALL COMODO AT ALL and then if it does not work - reinstall local SQL Server, MSSMS and finally Visual Studio. When Comodo was gone - problem was gone either. Now I have connection with my database using MSSMS and I do not have to reinstall
anything more.
Regards,

JDBC-ODBC-Bridge connection to SQL Database

Hi guys
I have a problem. I've made a little game which I want to put on my website. It has a highscore-list which I want to connect to my web host's database server to get the current list.
I tried this with JDBC and got it to work locally but when I uploaded it to my site it didn't work. I contacted my web host's technical support who told me that their server didn't have the JDBC driver and that I should use ODBC instead. I did lots of reading and found out about this JDBC-ODBC-Bridge. I have since been trying to implement this into my program but hasn't been successful.
In my original JDBC connection I used
private String url = "jdbc:mysql://" + host + "/" + mydatabase;
Class.forName("com.mysql.jdbc.Driver");
Connection connection = DriverManager.getConnection(url, username, password);Now I'm trying
private String url = "jdbc:odbc://" + host + "/" + database;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection(url, username, password);But, at least when trying it locally, I get the error
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name is too long.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:323)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at HighscoreDB.readFile(HighscoreDB.java:53)
at HighscoreDB.displayList(HighscoreDB.java:97)
at HighscoreDB.main(HighscoreDB.java:33)Please help ;)
Edited by: YZF-R1 on 2009-apr-09 13:26

YZF-R1 wrote:
masijade. wrote:
Do you know what ODBC is?I think I at least have the basic idea, I learnt most of what I know from this post:
[http://forums.sun.com/thread.jspa?threadID=211735&start=2&forumID=48]
masijade. wrote:
While "reading about this JDBC-ODBC Driver" did you also read about how to enter the URLs for it?No, I couldn't find that piece of information, why don't you tell me ;)
Here
>
masijade. wrote:
Did also read about the fact about needing to configure ODBC DSNs? Or about the fact that the connection URL is radically different if you don't configure one?No I did not. Please explain =)
Here
>
PhHein wrote:
Plus, JDBC-ODBC Bridges are evil!I'm beginning to realize this myself :O:(
BalusC wrote:
Drop that whole ODBC idea and just gently read the documentation which come along with the MySQL JDBC driver.I read a lot of it when I used the JDBC driver locally but how's that going to help me if the server doesn't have the JDBC driver installed?How will the Bridge help you if the ODBC Driver is not installed? And, the JDBC Driver (the Type 4.0 ones, which the MySQL Driver is) is 100% Java, so it can even be included in an Applet, if the HTML page that accesses it is done right, and the jars are "packaged" properly.

Moving the Connection Broker SQL database

Similar Messages

Maybe you are looking for