Moving the Oracle Payroll elements to another insatance

Dear All,
Please advise the best process we have to move oracle payroll element setup from one instance to another?
I can see isetup is one possible option , please confirm if this is correct.
Thanks,
Subbu.

This can function for you if both OS are equal:
Duplicating a Database
TIP 04: Duplicating a Database in 10g by Joel Pèrez
Joel PÃ©rez
http://www.oracle.com/technology/experts

Similar Messages

My iTunes is moving the songs I play to another folder

I've had my music organized in a folder on an external drive in the same way for years and never had an issue even after changing laptops.
I've recently bought an iMac and have been successfully transfered my iTunes library, been listening to and adding music just as I always did.
I just discovered that every song I play is automatically being moved to a "Music" subfolder inside my own media folder on my external drive. This is happening only when I play a song, the songs I add to my library are going into the correct folder.
I am not sure if this started occuring before or after I switched to the iMac. I have checked and rechecked my preferences and nothing looks out of place.
Any ideas?
Thanks

That's standard iTunes folder structure since iTunes 9.
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

Moving the TM backupdb folder to another drive

I would like to move my TM backups (Backups.backupdb folder) to a larger drive and have everything proceed as normal. Both my internal drive and an external drive are currently being backed up by TM.
Is this directly supported, i.e.:
(1) Turn off TM.
(2) Connect the new drive.
(3) Drag the backup folder to the new drive (this is a part I wonder about, because the file links are funky; I wouldn't think it would work).
(4) Redirect TM.
(5) Turn TM back on.
If I have CCC would that be better than (3)?
Edit: OK, I see http://discussions.apple.com/thread.jspa?messageID=9906852. So I could use CCC to duplicate the backupdb folder onto the larger drive?
Message was edited by: NewYorkYogi

NewYorkYogi wrote:
I would like to move my TM backups (Backups.backupdb folder) to a larger drive and have everything proceed as normal. Both my internal drive and an external drive are currently being backed up by TM.
Is this directly supported, i.e.:
(1) Turn off TM.
(2) Connect the new drive.
(3) Drag the backup folder to the new drive (this is a part I wonder about, because the file links are funky; I wouldn't think it would work).
That does not work in Leopard, but Apple seems to have fixed it in SL. If it's not successful, see item #18 of the Frequently Asked Questions *User Tip.*
Edit: I suspect the Finder copy will take much longer than the Disk Utility Restore procedure referenced above, but I haven't compared the times to be sure.
(4) Redirect TM.
(5) Turn TM back on.
If I have CCC would that be better than (3)?
Edit: OK, I see http://discussions.apple.com/thread.jspa?messageID=9906852. So I could use CCC to duplicate the backupdb folder onto the larger drive?
Message was edited by: NewYorkYogi
Message was edited by: Pondini

Does any one know table names for Payroll Elements that can be used in WF

How can one get the table names for ORACLE Payroll Elements and how can one use those table names in order to create a workflow that will automatically update the payroll balances.
I have created 3 elements for LOAN:-
One being Direct Payment as its Primary Classification---------------->Loan Amount
Two being Voluntary Deductions as its Primary Classification------->Recovery Amount
Three being Information as its Primary Classification--------------------->Reducing Balance.
Would like to create a work flow that will do automatic updation of the DB items in the Balances. So i want to know what all tables get updated once the transaction is made in Payroll. I am not sure if it really can happend.
Please PEOPLE i need some 1 to help me.
Thanking you all in advance,
Chetan

Theoretical and acual speeds for all types data connections can differ due to several variables. I cannot tell you if my eSata connection has ever achieved the theoretical maximum speed because I have never measured it. However I have compared transfer times against Firewire with large files and it is noticeably faster (at least by 50%+). Therefore I highly recommend having it if you need to transfer large files from one HDD to another.
If you have a recent MBP, you already have a Thunderbolt connection. I do not believe that there will be a Thunderbolt Express Card for older MBPs because they are not configured to accept that technology.
Ciao.

How can you handle Third Party Payment in Oracle Payroll

People I hope you all are at your Good Health!
I have a question and that is i would like to know how i can restrict a dependent from getting an Insurance benefit after he has crossed the Age =18 Also the To date must be calculated and populated automatically.
Also, how can we handle this third party payment in the Oracle Payroll.
All comments are welcomed.
Chetan

For the payment piece, create a payment method on the person record as a third party. you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check .
Ankur thank you for the response i have understood that we must create a Payment Method and Check the Check box for Third party Payment on Payment Method window.But how will that be handled for case where an employee has taken a Loan from a Bank and he has to be deducted every month from his salary how can we handle such a requiremet.
I did not understand when you said :
"you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check ."
Could you please explain me.
Regards,
Chetan

Moving the Reporting Services and Report Server DB into AlwaysON Availability Group

I have configured the new set of SQL 2012 AlwaysOn Availability Group and need to move the SSRS and it's Report Server DB into that Availability Group.
Can anyone give tell me the steps to do this move?
Can I just backup the ReportServer DB into the AG server then import that DB into the SSRS running on the new AlwasyOn AG SQL?

Hello,
Based on your description, it seems that you want to move the Report Server database to a different server. If so, both the reportserver and reportservertempdb databases must be moved or copied together. You can move the databases by using Detaching
and Attaching or Backup and Restore.
What's more, you should also backup the encryption keys for the report server database you want to move and then restore to the new server.
You can configure report server databases in Always On Availability Group to be part of a replica; however Reporting Services will not automatically use a different replica for the report server databases when a failover occurs
Reference:
Moving the Report Server Databases to Another Computer
Reporting Services with AlwaysOn Availability Groups (SQL Server)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Moving the HFM Oracle Database from One Server to Another

Our Oracle DBAs have requested that our HFM Oracle db in TEST be moved to another server. When we tried this in our DEV environment, we had major issues afterwards and some of the software needed to be re-installed. Does anyone have any recommendations on how what we need to do on the Hyperion side prior and post db move to make the transition smooth? In addition to HFM, we have Essbase, Planning, Workspace, Interactive Reporting, Financial Reporting and Web Analytics.
Thanks.
Terri Taylor

If all of the database files, including the binaries, are on a SAN you might be able to...
1. Cold backup of everything - database files and binaries.
2. Dismount the SAN volumes from the old server.
3. Mount the SAN volumes to the new server - using the same mount points.
4. Start up the database on the new server.
If the OS version/release are the same between new and old, that should be about all you need to do.
If the OS is same but upgraded to new version/release you will want to relink the Oracle executables before starting up.

How to print the Cheques in Oracle Payroll in R12

After Running the Cheque Writer Process in Oracle Payroll how can one print the Cheque Leaves in the Payroll module for each employee that is to be paid through cheque.
Please give the Navigation for the same.
Regards,
Chetan

Please if there is any one who has tried out some customisation on how to print the cheques after running the cheque writer process kindly share it with me as i am in big trouble here....

Windows's Restoration wizard is no longer recognising the WindowsImageBackup, when moved from one external HD into another one.

Hi,
I created WindowsImageBackup a three-month period ago and saved it on an external hard disk. Then, I have moved/cut this WindowsImageBackup from the external hard disk was first saved on while created into a subfolder
on another different external hard disk. Whenever now clicked 'advanced recovery methods', then chose use ' a system image'. However, when I booted into Windows environment, I didn't see that the external drive containing image wasn't listed, although I have
clicked on 'refresh' while external drive is plugged. When clicked on the 'advance' button, then click 'located driver if the drive isn't listed' link, I could naviaged into the external hard disk, which means it is recognised by Windows and it doesn't need
a driver.
NOTE: the image is for the same OS installed on my computer.
I really want to keep many full different Windows Image Backups, then when create Windows Image Backup, I moved it into subfolder in order the next new don't delete the older one.
I was expecting that this is because while external HD containing image is plugged in the USB3 port, however, when I let it plugged in the USB2 port, the drive wasn't listed in the list
A man should convert his anger and sadness into strength to continue living in this life.

Thanks a lot,
NOTE: system image Disc containing(old images, WindowsImageBackup1,2,3, and so on) wasn't listed/found, and not the Restoration failed
Let me give you this scenario:
I have created a Windows image backup for OS partition(C) and Data partition(D). Second: I have saved the created image into an external hard disk
Third: When the WindowImageBackup created in the external hard disk. I tried booting into Windows environment, and the wizard found the image automatically.
Froth: I have moved the 'WidnowsImageBackup' from a partition on an external hard disk (A) into another external hard disk(B)
Fifth: I have done some changes on the OS system(such as installing programs and so on) and data partition(such as adding data and so on)
Fifty: I have decided to create a new WindowsImageBackup and save it into external disk 'B', but before that I have done, I must rename 'WidnowsImageBackup by incrementing '1' after 'WidnowsImageBackup' in order ton not be overwritten.
Sixth: I created the new 'WindowsImageBackup'
The WindowsImageBackup just created is recognised by Windows's resoration wizard because it wasn't moved. However, windowsImageBAckup1 isn't recognised because it wasn't saved here, however, it was pasted here from another location.
I would like to save many full images:
WindowsImagBackup
windowsImageBackup1
-------------------------2
-------------------------3
and so on.
However, as I said before, when booting into Windows's restoration wizard, then clicked on 'selcte an image', I didn't find any option to search for the image.
Yes, there is an option saying 'if you don't see your 'system image disc' listed in the image location, then you can pluge your disc and click on refresh. I have done but only the 'WindowsImagBackup' created on the same external disc was
found. Even those images created in same external disc, but their main folder 'WindowsImageBackup' changed into 'WindowsImageBackup1, 2, 3 and so one were not found'
If someone wants to save many full WindowsImageBackups, then how can he be doing?
NOTE: Although I have read in the Windows help support what is below, I when I have copied the older system images into another locations, they became unrecognised/found in the restoration Wizard:
Keeping different versions of system images
If you're saving your system images on an internal or external
drive, or on CDs or DVDs, you can keep several versions of system images. On
internal and external hard drives, older system images will be deleted when the
drive runs out of space. To help conserve disk space, you can manually delete
older system images. For more information, see What backup
settings should I use to maximize my disk space?
If you're saving your system images in a network location, you can
only keep the most current system image for each computer. System images are
saved in the format of drive\WindowsImageBackup\computer
name\. If you have an existing system image for a computer and are
creating a new one for the same computer, the new system image will overwrite
the existing one. If you want to keep the existing system image, you can copy it
to a different location before creating the new system image by following these
steps:
Navigate to the location of the system image.
Copy the WindowsImageBackup
folder to a new location.
A man should convert his anger and sadness into strength to continue living in this life.

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11. I selected the option to edit in another application. But when I select edit in iPhoto, elements opens but the photo does not open in elements. What is the problem?

I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11. I selected the option to edit in another application. But when I select edit in iPhoto, elements opens but the photo does not open in elements. I'm using a Macbook pro 15 inch with retina display with OS 10.8.4 What is the problem?

http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/
It relates to Elements 10, but it's the same for 11.

How to setup the Advance payment in Oracle Payroll

Dear Friends,
Can any one pls let me Know,How to setup the Advance payment in Oracle Payroll.. Pls ..
with regards
Veeru

GLOBAL HRMS , XX_legislation
Plz help

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

How to search tables and views used in the code of oracle fmb 6i from another form???

Hii guys, this is a very interesting question and i hope that it will have ample amount of answers.
My requirement is to know the number of tables and views and backend functions/procedures which are used in the code written in the oracle forms 6i,
all i want is to display whole views, tables or functions/procedures which are written in the code of a particular fmb, i do have the path of that fmb and i want to read the code and search through it's entire code for the tables/views/backend procedures/functions written in the code. So how to search through the entire code of a particular form (6i) and make it display through another form.
I am using oracle forms 6i.
Please help me out....
With Regards:
Ankit Chandra

Here is a modified dealForm.jsp that merges the 2 steps - both symbol submission and Yahoo convert is done by it. Play with it and add your DB code to it:
<html>
<head><title>IPIB Database Selection</title></head>
<body bgcolor="#DFDFFF">
<H1><CENTER>IPIB Database Selection</CENTER></H1>
<font size=4>
<%@ page language="java" %>
<%@ page import="java.net.*,java.io.*,java.util.*" %>
<%
String symbol = request.getParameter("symbol");
if (symbol != null) {
String urlString = "http://finance.yahoo.com/download/javasoft.beans?SYMBOLS=" + symbol + "&format=ab";
try {
URL url = new URL(urlString);
URLConnection con = url.openConnection();
InputStream is = con.getInputStream();
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr);
String line = br.readLine();
StringTokenizer tokenizer = new StringTokenizer(line,",");
String name = tokenizer.nextToken();
name = name.substring(1, name.length()-2);
String price = tokenizer.nextToken();
price = price.substring(1, price.length()-2);
%>
<p>
Original line from yahoo <%= line %>
</p> <p>
Name: <%= name %>
</p> <p>
Price: <%= price %>
</p> <p>
Pub DB processing code from dealLoad.jsp here
</p>
<%
} catch (IOException exception) {
System.err.println("IOException: " + exception);
} else { %>
<form action="dealForm.jsp"method="GET">
<p>Enter Symbol: <input size="20" name="symbol">
<inputtype="submit" value="Submit">
</p></form>
<% } %>
</font>
</body>
</html>

Increase the Oracle datafile size or add another datafile

Someone please explain,
Is it better to increase the Oracle datafile size or add another datafile to increase the Oracle tablespace size?
Thanks in advance

The decision must also includes:
- the max size of a file in your OS and/or file system
- how you perform your backup and recovery (eg:do you need to change the file list)
- how many disks are available and how they are presented to the OS (raw, LVM, striped, ASM, etc.)
- how many IO channels are available and whether you can balance IO across them
Personal default is to grow a file to the largest size permitted by OS unless there is a compelling reason otherwise. That fits nicely with the concept of BIGFILE tablespaces (which have their own issues, especially in backup/recovery)

Moving the Oracle Payroll elements to another insatance

Similar Messages

Maybe you are looking for