Moving to a new CAS box exchange 2010 sp3 ru6

I am entertaining the idea of creating a second CAS box for our environment.
in the current environment
we have:
All servers have Exchange 2010 sp3 RU6
Ex1 (physical box) - have HUB/Transport/DAG with Ex2 
Ex2 (physical box) - have HUB/Transport/DAG with Ex1
CAS1 (VM on hyper v 2008r2 cluster) - Client access role
outlook 2010 profiles all point to cas1
what I want to achieve is to build a cas2 box on a new hyper cluster.  we v have a hyper v 2012r2 cluster that has a different ip scheme (cas1 ip is 12.12.100.x, and cas2 would have 12.12.103.x)
what would I need to do in order to get my users to point to the new cas box.   downtime is not a major issue.  but I want to make sure that if I build cas2, it would prevent cas1 from working and users getting mail.  I am sadly unfamilure
because I did not set up the ex1/2 or the cas box. I have only ever installed SPs and RUs.
I have no existing CAS Array. 
I would happy to read any setup docs, or anything of that nature if you have links available.
let me know what you can, and feel free to ask any further questions if you have need of additional info.
thanks
Ian
Ian

Hi,
You need to install CAS2 in existing exchange environment and need to move\change URLs OWA,EWS,Autodiscover , ActiveSync, outlookanywhere, OAB , SSL certifcates and your DNS IPs to point new CAS2.
Pls check similar threads :
http://blogs.technet.com/b/exchange/archive/2009/11/20/3408856.aspx
http://social.technet.microsoft.com/Forums/lync/en-US/faaabe2e-fafb-4d62-a01b-25c1c65bb9c4/move-cas-ht-roles-onto-a-new-exchange-server
http://social.technet.microsoft.com/Forums/exchange/en-US/40cbe4bc-8b7b-438a-9c28-668e4211acf1/moving-client-access-role-to-different-server

Similar Messages

  • Exchange 2010 SP3 RU6 Blackberry problems

    We are experiencing issues with Blackberry devices.  This started Yesterday.
    The primary error message on the Blackberry is:-
    Message Status: Message included an invalid address.
    If you type a full address in the above message appears.  it's a vodafone blackberry service that talks to our exchange 2010 service.
    Fails when forwarding emails to.  We are looking into it being a blackberry phone issue but it seems od that this has occured just 1 full day after the servers were patched and the SP3 RU6 applied.
    Any ideas would be greatly appreciated
    Regards and thanks in advance.
    Bill Broom

    This has been fixed.  It did turn out to be  thrid party issue with the BES servers.  once they had rebooted them everything is now working fine.

  • Exchange 2010 SP3 RU6 - Problems with New-MailboxExportRequest

    New-MailboxExportRequest seems to ignore -ExcludeFolders and -IncludeFolders and export the entire mailbox. For example:
    New-MailboxExportRequest -IncludeFolder TestExport -Mailbox TestUser -FilePath \\SomeUNCPath\test.pst
    will exportsthe entire contents of the mailbox. I believe this used to work before, but it is possible I have lost my mind. 
    The folder TestExport is on the root, as in, if you were to run Get-MailboxFolderStatistics, the FolderPath is /TestExport. I've also tried using -ExcludeFolders to exclude every other folder with no luck.
    Any confirmation of an issue or help is appreciated. 

    Hi,
    From your description, I recommend you use the following cmdlet to check the result.
    New-MailboxExportRequest -IncludeFolders "#Inbox#" -Mailbox TestUser -FilePath
    \\SomeUNCPath\test.pst
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2010 SP3 Rollup Update 6

    Our Exchange environment is currently on Exchange 2010 SP3 RU3 and the Forefront Protection 2010 for Exchange server version is 11.0.713.0 (Rollup 3). 
    We planning to upgrade Exchange servers and install Exchange 2010 SP3 RU6, question which I have is it Mandatory to upgrade the Forefront Protection 2010 for Exchange server version is 11.0.727.0 (Rollup 4) before we install Exchange 2010 SP3 RU6 on the
    Exchange servers.
    Thanks,
    AJ

    Thanks Adam for the prompt response and yes I recall these cmdlets to disable and there is a similar cmdlet to enable it. Also after Exchange 2010 SP2 after some RU there is no need to disable FPE before installing RU however it is recommended to disable
    it.
    If you refer the comments section mentioned in the blog below it talks about it:-
    http://blogs.technet.com/b/exchange/archive/2014/05/27/released-update-rollup-6-for-exchange-2010-service-pack-3.aspx
    If you read the comment posted by James Knoch posted on this blog which is as below,
    SP3 & the Rollup Updates are not supposed to require you to disable Forefront anymore, but it doesn't hurt to be safe and disable/enable it anyways. Make sure you are running Forefront Rollup 4 (http://support.microsoft.com/kb/2619883)
    & the latest security update (http://www.microsoft.com/en-us/download/details.aspx?id=41836).
    Above stated confused me a bit, is it mandatory to upgrade Forefront or it is NOT.
    Thanks,
    AJ

  • Exchange 2010 SP3, UR7 after BSOD. Moving mailboxes to new database

    Yesterday our Exchange 2010 SP3, UR7 had an BSOD. To recover the services I was forced to do eseutil /p on all DBs.Current status is all DB's are mounted and data are accessible to users. I working on migrating mailboxes to new databases and to remove the old ones.1. I have issue with four move requests that were active during the BSOD. When I try to restart or remove them I end withEMCText--------------------------------------------------------Microsoft Exchange Error--------------------------------------------------------Action 'Remove Move Request' could not be performed on object 'Beňo Michal'.usernameFailedError:Failed to communicate with the mailbox database.MapiExceptionNotFound: Unable to open entry ID. (hr=0x80004005, ec=-1601)Diagnostic context:Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=83]Lid: 43559...
    This topic first appeared in the Spiceworks Community

    Registration is Now Open to Publish on PowerShell GalleryWe are excited to announce that the PowerShell Gallery will accept registration from any users who wish to publish PowerShell modules and share their work with the world.For the past year, the PowerShell Gallery has been slowly adding content from our closest community contributors, most of whom are Most Valuable Professionals (MVPs) and internal Microsoft contributors. While we were building the basic features of the PowerShell Gallery, we restricted the set of people who could publish new modules, and required an approval step before allowing users to register. This approach provided the PowerShell team with an agile feedback loop to help design and to learn what gallery experience will be optimal for the broader PowerShell community.To contribute to the gallery you simply have...

  • Same CAS Array Exchange 2010 (HLB), with OS Windows 2008R2 and Windows 2012.

    Hello,
    We have a 10 node DAG (Exchange 2010 SP3, Windows 2008 R2), with 2 CasArray.
    We are planning to add news (multirole) servers and create a new DAG (Exchange 2010 SP3, Windows 2012) in this infra, in the same AD site, to migrate all mailbox from the other DAG (Migration from virtual servers to physical servers).
    So we use the same CasArray (HLB, with F5) with différent OS version, during the migration time (1 month or more). I haven't found anything that say it's not supported or can be problematic.
    Have you feedback or advice?
    Thanks,
    Sébastien

    Hi,
    Based on my knowledge, there is no need to deploy a CAS array with CAS servers running on the same Window version. The version can be different.
    After a Client Access server array is defined within an Active Directory site, all Client Access servers within that Active Directory site are automatically part of the Client Access server array.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • MS Exchange 2010 Sp3 Ent Migration to Exchange 2013

    Hello,
    We currently have 2 Exchange 2010 SP3 servers in 1 DAG. Both servers host CAS, Mailbox and Hub Role.
    I want to introduce a 3<sup>rd</sup> Exchange 2013 Server and slowly move users onto a new DAG I build in Exchange 2013.
    Can I create a 3<sup>rd</sup> Exchange 2013 Server with CAS and Mailbox Server Role and make the 3<sup>rd</sup> Exchange server (2013) a member of the existing (2010) CAS array then slowly perform local move requests for users mailboxes
    from my Exchange 2010 DAG to the Exchange 2013 DAG without any disruption to my outlook, OWA and AS clients?
    Exchange 2010 (Windows 2008 R2)
    Exchange 2013 (Windows 2012 R2 DataCenter)

    Hi,
    In Exchange 2013, all Outlook connectivity (Internal and External) takes place over Outlook Anywhere(RPC/HTTP). Thus, CAS array which is used internal for RPC/TCP protocol (MAPI) no longer exists in Exchange 2013.
    For your coexistence environment and the plan to migrate all mailboxes to Exchange 2013 in the future,
     we need to set all virtual directories for CAS 2013 and enable Outlook Anywhere for Exchange 2010. If the mailbox is moved to Exchange 2013, the Outlook client would connect to the server which is set in Outlook Anywhere External host name
    and Internal host name instead of CAS array. If all configurations are proper, CAS 2013 would also proxy the service requests for Exchange 2010 users.
    Here are some reference about Client Connectivity in an Exchange 2013 Coexistence Environment:
    http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
    Exchange 2013 Client Access Server Role
    http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
    Exchange Server 2013 Client Access Server High Availability
    http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
    Exchange 2010/2007 to 2013 Migration and Co-existence Guide
    http://msexchangeguru.com/2013/05/10/exchange2013-migration/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

    Hi there:
    We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
    Quick briefing:
    Followed this instructions:
    http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
    * Created CRAWL RULE
    - Used Domain Admin for content access ---> IS THIS WRONG?
    - Domain Admin can access public folder thru Outlook Web Access (checked)
    - Included all items in this path
    PRINTSCREEN 1
    * Added a content source for Exchange Server public folders
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
    PRINTSCREEN2
    * Did a FULL CRAWL
    PROBLEM:
    - Search results does not throw "correct data". Some items are not being found
    CRAWL LOG is reporting: Error while crawling LOB contents
    Detailed error message:
    https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
    Error while crawling LOB contents.
    Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
    The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
    System.InvalidOperationException An internal server error occurred.
    Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
    We thought it's a throttling issue / found possible solution:
    http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
    Tried it, still same Error messages, problem not resolved.
    Any hints? Please advise.
    With best regards
    bostjanc

    Hi Bostjan,
    From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
    For throttling policy part
    1.Execute the command for Set-ThrottlingPolicy
    Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
    2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
    For registry key part
    1. Start Registry Editor (regedit).
    2. Navigate to the following registry subkey:
    \\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    3. Right-click ParametersSystem, point to New, and then click Key.
    A new key is created in the console tree.
    4. Rename the key MaxObjsPerMapiSession, and then press Enter.
    5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
    The new value is created in the result pane.
    6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
    7. Right-click the newly created key, and then click Modify.
    8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
    9. Restart the Microsoft Exchange Information Store service.
    If it still doesn’t help, please check ULS log for related error message.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

    Hi there,
    I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
    Our current Exchange environment consists of the following:
    1 x CAS/HT Server
    2 x Mailbox Server (members of a DAG)
    The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
    The Execution Policies on our Exchange servers are set as follows:
    – CAS/HT Server:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine Unrestricted
    – Mailbox Servers:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine RemoteSigned
    Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
    I would be very grateful if you (or any of the kind readers) could help me with following questions:
    1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
    2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
      i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
      ii. Install SP3 followed by RU 5 on the first mailbox server
      iii. Install SP3 followed by RU 5 on the second mailbox server
    Many thanks,
    M

    Hi Amit,
    Many thanks for the swift reply.
    That's correct.  We didn't set the Powershell execution policy via Group Policy.  We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
    The mailbox servers' execution policies have not been changed and are set to those values by default.
    I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
    But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

  • Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

    Hello Experts,
    We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
    This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
    We have one dial plan and its SIP URI and Secured.
    Looking for high level steps to plan coexistence and upgrade of Unified Messaging  from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
    Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
    Thanks in advance for help.
    -DK

    Hello Hinte,
    Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
    I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
    1) Install new CAS+MBX Server
    2) Move system mailbox as per MS documentation to Exchange 2013 MBX
    3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
    CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
    4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers. 
    5) Run Exchucutil.ps1
    in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
    Will this be enough or Do I need to create New Auto attendant or
    Haunt Group etc?
    Thanks for all the help!

  • Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash

    0
    I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log.  I can reproduce the issue by attempting to create a new
    outlook profile and checking the name against the CAS server.  This crash's the service and the client recieves an error message.  The contents of event ID 4999 is below.  I've tried re-installing the CAS role, re-applying the schema extension
    for SP3.  I've installed all windows updates, enabled logging but I'm not getting anywhere.  If anyone can help with this issue, I would greatly appreicate it.
    Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
    ErrorReportingEnabled: True
    That error is followed by a message that the Address Book service has sucessfully started

    Hello,
    For exchange 2010 sp3, there is no article to explain the issue.
    I suggest you run EXBPA aganist your exchange server health check.
    Cara Chen
    TechNet Community Support

  • Exchange 2010 SP3 Update Rollups

    Hi All,
    I have a question about installing Update Rollups for Exchange 2010 SP3. After some organizational changes I have to take care of windows updates and our WSUS server. During the last check I found out that there are:
    Update Rollup 5,6,7 listed in WSUS for our Exchange which is (CAS, HUB, MB). I've checked also some information about installing Update Rollup but it's not very clear for me. i saw also a problems after installing Update Rollup 6 and also some info from
    blogs.technet.com
    The release contains fixes for customer reported issues and previously released security bulletins. Update Rollup 7 is
    not considered a security release as it contains no new previously unreleased security bulletins. Customers running
    any Service Pack 3 Update Rollup for Exchange Server 2010 can move to Update Rollup 7 directly.
    So, what is the best way to do it? 
    - Decline old Update Rollups, Install all other security and critical updates from WSUS, reboot the server, install Update Rollup 7, reboot the server?
    Thanks in advance

    Hi kondio
    Thank you for your question.
    Service packs and update rollups are part of the servicing strategy for Exchange 2010. They provide an effective and easy-to-use method to distribute Exchange 2010 fixes and modifications. We recommend that you install the latest service pack and update
    rollup to keep the product up-to-date.
    I suggest you update manually instead of WSUS.
    You  can refer to the following link to read about RU:
    http://technet.microsoft.com/en-us/library/ff637981(v=exchg.141).aspx
    If there are any questions, please let me know.
    Best Regard,
    Jim

  • Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

    Hi,
    When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
    it can be downloaded in three cases of
    intermittents ways :
    - The full message is downloaded in HTML format
    - The message is download in text format and a
    "Download full message" link is displayed
    at the bottom of the message
    - The message is displayed in text format,
    but continues to download the rest of the message.
    When the download is complete, the message is displayed
    in HTML format.
    This behavior is intermittent. The Apple's support
    says it is a particular configuration on Exchange server
    that causes this behavior.
    I want to know if there is a way to fix
    this problem and force download email
    either in text or HTML format ?
    This problem occurs on iPhones/iPad
    (iOS8.2) with ActiveSync account (Exchange 2010
    SP3). It occurs also with Outlook.com account.
    On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
    and MaxEmailHTMLBodyTruncationSize settings are
    unlimited in ActiveSync policies.
    Thank you for your help.

    Hi,
    We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
    Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
    In the console tree, navigate to Organization Configuration >
    Client Access.
    In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
    In the action pane, click Properties.
    Under the Sync Settings tab, check or uncheck the box
    Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
    And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
    Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
    For more information, please refer to this document.
    https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Rollup 6 for Exchange 2010 SP3

    Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues: 
    “Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
    of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
    We have installed Rollup 5 but it did not address the issue. 
    Thanks
    Dave

    Hi,
    Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
    http://blogs.technet.com/b/exchange/
    Thanks for your understanding.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for

  • Slow performance using getBlob(), how can I correct this ?

    I have wav files stored in a database that range from 10M - 75M... When I make a JDBC call using ResultSet..ie a rs.getBlob for a large wav file, the performance is terribly slow. How can I improve this ? Is there a way to get the BLob is pieces or s

  • Podcast Search results not showing all episodes

    I'm new to podcasting & our podcast isn't showing up properly. When you look at our podcast in the search results, only one episode shows up. There are three episodes total, but they show up only if you subscribe to the podcast. Is there a way for th

  • Checkin filter not working properly in case of WebDAV

    Hi guys, I have written a custom checkin filter. This filter populates MetaData xStartDate of Date type. When I checkin content item through UCM admin portal, then filter work fine and set the xStartDate meta data value. Here is the code that is used

  • Help! Having a problem exporting - iBooks Author tells me iTunes Producer is not installed, but it is... How do I fix this???

    Hi, I have finished a book, go through the "publish" process, it starts the export, but at the end gives me a warning message that iTunes Producer is not installed on my Mac, but it is, window open, logged in and all.  The error message refers me to

  • Repeating section issue

    Hi Friends, I'm using a repeating section containing a dropdown value. I click on "Insert Item" and selecting an option. I click on "Insert Item" once again and if I select another option, the first item is also changing to selection I did second tim