Moving to Chile with my Z30

I´m moving to south america (chile) and goes with me my Z30 from Bell.
But not working in chile this device, how can I do to use my great BB Z30 in Chile with local cellphone providers

which Z30 model do you have?
it is unlocked aka SIM free?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

Moving to Chile in a week, need to know if my 27'' iMac will work on 220V automatically

Hi guys!
I'm graduating today from college! and I'm moving to Chile in just a week and a half to work. I have a 27'' iMac that I bought last year but I don't know if it will work there because of the voltage difference. Does anyone know for sure how this works? Of course when I've gone down there my Macbook hasn't had any problems because the charger converts the power, but I don't know if the iMac has the same capability or if I'll have to buy a converter in Chile.
Please let me know!

The iMac will work on the electricity supplied to the wall. You just may need a different shaped prong to plug into the wall. Check the specs at Apple's web site.

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

Pls need help I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

Changing your iTunes Store country:
Sign in to the account for the iTunes Store region you'd like to use. If already signed in to an account, from Settings, choose Store and then View Account.
Tap "Change Country of Region" and follow the on screen process of changing your region. Agree to the terms and conditions for the region if necessary, and then change your billing information.
This is from http://support.apple.com/kb/HT1311
If you get an error, then contact: http://www.apple.com/support/itunes/contact/

In Chile with NEW 4th Gen Nano that won't charge

I am visiting in Chile with my family and we have two NEW 4th Gen Nanos that won't stay on after being unplugged from the computer. My daughter has a 1 year old MacBook and I have a HP PC with Vista. She had a 3rd generation Nano that worked fine on her USB port and all my PC's USB ports are 2.0 compatible. Help???

See here: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
B-rock

Moving to Kuwait with my MacBook

To any expats living in Kuwait reading this string, I need your insight into your own experiences actually moving your iMac to Kuwait from a Kuwaiti Customs standpoint.
I will be coming over with a new MacBook about a month before my wife which will leave the iMac G5 still in the States for her to contend with. I do not necessarily want to put it in a shipping container with the rest of my stuff and do not want to task her with lugging our computer baby in the iLugger (which look pretty practical) along with our human baby on the plane so I though of shipping it to myself via UPS (expensive, but easy) and it seemed that route would be almost impossible between the restrictions on personal effects, the duties and the approval of software on the machine.
How did any of you get your iMacs over there from your home countries?
Am I better off just waiting until I get there and buying a new one?
Did you encounter any difficulty with your laptops as you entered the country? What were the duites, if any?
Thanks 1,000,000

which Z30 model do you have?
it is unlocked aka SIM free?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Moved to Helsinki with my 8320 Curve unlocked, can't get it to work

Hi, I just moved to Finland and brought with me the 8320 Curve, which I previously unlocked from T-Mobile. They basically gave me the instructions and said it would be free to use with a new SIM card.
I just got a SIM card and the cellphone works perfectly but no other feature. The carrier, DNA, said I wouldhave to set it up with BB since they only carry Nokia. Basically they do not help at all, like with everythingelse in Finland, no customer service.
Kiitos,
Carolina

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

Using Moving Average Materials with MF42N (Repetitive Production)

Version: ECC 6.0
I have a "Is this possible" question. I know this isn't a best business practice, but thought I'd anyway. Here goes ...
A material that uses Moving Average (referenced as Material123 below) has the following two materials in its BOM: (1) Moving Average (Material456), and (2) Non-valuated material, material type = LEER (Material789).
The 1st material in the BOM (Material456) is Liquid Oxygen. This product is purchased from a vendor and received into inventory via movement type 101.
The 2nd material in the BOM is an empty cylinder (Material789)
The parent material (Material123) being produced is gaseous Oxygen (Oxygen in gas form).
Basic production process: Liquid Oxygen is the raw material, it is pressurized and stored in a cylinder in gaseous form (for clarity, you've probably seen cylinders before, the two obvious examples of cylinders are propane cylinders used on barbeques and helium cylinders used to blow-up balloons).
Assumptions: (1) We do not want to do a cost roll, (2) We want to report production (TCode=MF42N) to consume the Bulk Oxygen (Material456) and the cylinder (Material789), and create the finished good (Material123), and (3) We do not want to burden the cost of the parent material (Material123) with direct costs, we only want the material costs.
If you read through the assumptions you can see that this is not proper accounting for a production process (i.e. the direct costs in the production process are not capitalized -- labor, power, etc.), if you can get beyond that I was wondering if anyone has ever set anything like this up? I tried to set this up and report production in my test environment, I got the materials created, the BOM created, but when I tried to report production it gave me an error, it needs a production version and/or a cost collector.
If anyone has done anything like this I'd be interested in knowing if it is possible to report production with a setup like this. Thanks.

Using CO production orders may solve your problem. They dont need PP or product costing to be implemented. Costs can be flexibly posted and there are not many demanding requirements for this.
Tcode:KKF1
Link: [http://help.sap.com/saphelp_erp2004/helpdata/EN/82/e72326b11411d29f60080009b0db33/frameset.htm]
Thanks
Naveen

How to change moving average price with movement type 501

Hi Gurus,
Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
Thanks,
Vikram

Hi
You need to goto transaction OMJJ, select the movement type as 501.
Then double click on "Field selection-Enjoy transaction".
Add the field EXWBR & make it optional.
Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
Enter the amount in this field during the GR.
Regards
Prasad

MOVED: need help with finding gpu for win 7

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=128552.0

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

MOVED: overclocking problem with P965 NEO

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=108588.0

Quote from: pszemia on 23-May-07, 01:22:26
i want to overclock the cpu without overclocking the ram, is that possible with this motherboard??
for example: 333Mhz cpu and stay at 800Mhz for ram
the cpuz is reading actually 379 (i cant remember the exact value, but is around this) for ram when i have set to manual 667 why this happen??? (the cpu is at 300)
The memory speeds you can select are not absolute but FSB:RAM dividers
533Mhz equals the 1:1 divider
667Mhz equals the 4:5 divider
800Mhz equals the 2:3 divider
This means if you select 667Mhz RAM in bios you don't force 667Mhz but you select a FSB:RAM ratio of 4:5
At stock FSB of 266Mhz this makes : 266 / 4 = 66.5 * 5 = 333 Mhz (666 Mhz DDR) wich is the 667Mhz you select.
However, if you change FSB the RAM speed changes along with it.
So, for your 300Mhz this makes : 300 / 4 = 75 * 5 = 375 Mhz wich is +- the 379 Mhz cpuZ reads.
If you want 333Mhz fsb and ram @ 800 select 667Mhz RAM in bios and set FSB to 333Mhz, also enter RAM timings manually.
This will result in 333 / 4 = 83.25 * 5 = 416 Mhz (832 Mhz DDR) for ram - The gskill should be able to take this mild 32Mhz overclock.
The board might not make it to 333Mhz tho - It's a budget board wich overclocks poorly.

Post Moved Continual-problem-with-SMTP-passwor...

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Moving a clip with a custom scrollbar

This is a newbie question.
I've devised a custom scrollbar in this
test site (in section
Ego). The scrollbar is a movie symbol containing another symbol,
the scroll button. The scrollbar has code for moving the scroll
button and it works.
Now, on the left, you see a long text that I want to scroll
with the scroll button. Pretty simple.
The text is a movie clip containing several textfields.
So... how to synchronize both? Probably with a listener that
will modify the _y position of the movie clip according to a
movement ratio. I'm a little bit confused.
The text movieclip is called: 'contenu_mc'
The scroll bottom is called: 'goupillon_mc' (but is inside
'defilement_mc', the whole scrollbar)

As long as it has room in the timeline to move it, do the following:
1. Select the clip
2. Press +5. (period) and then enter.
You clip will then move 5 seconds forward in the timeline.
Hope that helps you.

Moving desktop icons with Yoga screen rotation and Windows 8

I have a Yoga 11s. I have a bunch of desktop icon shortcuts and folders on my desktop as I rarely use the Windows 8 "tiles." Unfortunately, when using the Yoga as a tablet, whenever the screen rotates, all my desktop shortcuts and folders move around. Is there any way to get them to stay in place in Windows 8? I realize that when one rotates the tablet around that the icons have to move around to accommodate the screen rotation, but when I rotate the screen back to the horizontal position, they don't return to the position they were in.
Thanks!

I did get a potential solution over on a Windows 8 forum. Unfortunately the solution doesn't stop the migration of the icons. It only restores them to their original position with a few mouse clicks. I have yet to find a solution that keeps the icons from moving in the first place.
I downloaded a program called Iconoid. When you first run the program, a little windows pops up. You click on the positions tab, then put the dot in the selection that says "use relative positions for all resolutions." You then hit the "save icon positions (relative)" button and now the program remembers where all of your icons are.
When you rotate the screen and all your icons get messed up, you open Iconoid (in systray for me), go to that same "positions" tab, then hit the "restore icon positions now." That moves all the icons back to where they were. You just have to make sure that if you change your icons on your desktop a lot, that you hit that "save icon positions (relative) button once in a while so the program gets updated icon positions.

Moving to Chile with my Z30

Similar Messages

Maybe you are looking for