Moving to full 64 bit - advice please
Ok - Currently i am on Logic 9 - I want to consider getting Logic X.
Many of my plugins are 32 bit - how the **** do I get them up to 64 bit? Thinks like Symphobia and Kontact 5.
Any pointers to one simple article explaining it all.
Thanks!
You check with the vendors, like Native Instruments. Their plugins are 64-bit for several years.
Similar Messages
-
New System Build feedback/advice, please...
Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
Purchase date: this week
Budget: I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more research, my inclinations are trending higher.
System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
Parts to Upgrade: Full system build
O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
Vendor: Newegg unless I can save big $$ else where. I like B&H.
It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
Any advice is appreciated. Thank you for your expertise.
Processor:
Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
$299 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
or
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
$569 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
Mobo:
MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
$218 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
or
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
$240 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
or
MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
$380
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
Memory:
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
$130
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
Hard Drive:
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
$160
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
Video:
GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
$160 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
or
MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Item#: N82E16814127696
$300
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
Optical Drive:
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
$70
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case:
COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
$60
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
Power Supply:
FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
$90
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
Total $1190
or $1760
I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.Alex,
I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
- robust, runs and never fails
- has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
- quiet; who wants to be doing creative work with any server room like wind noise
Now let me be specific where you are simply WRONG WRONG WRONG:
You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
You stated: "Full towers - in themselves - are worse for cooling"
Fact: That is one crazy indefensible statement!
I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
Regards,
Jim -
While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?
This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al -
I need G4 MDD, Hard Drive Up-Grade advice, please.
I need G4 MDD, Hard Drive Up-Grade advice, please.
My G4 Model:
Power Mac G4 (Mirrored Drive Doors 2003) - M9145LL/A
Processor G4 1.25 GHz (SINGLE)
- L2 Cache 256 KB (1:1)
- L3 Cache 1 MB
167 MHz Bus Speed
(Dual Boot Model) - Running 10.3.9 and 9.2.2
Installed Memory - 1- 256 MB Stick and 1- 512 MB Stick - (Kingston PC2700 - KTA-G4333)
- Maximum 2 GB
- Slots 4 SDRAM (PC2700 - DDR333)
Hard Drive 80 GB Seagate
- Type (Speed) Ultra ATA/100 (7200 rpm)
Combo Drive
USB 1.1 2
FireWire 400 2
EtherNet (built-in) 1000Base-T
Expansion Slots 4 PCI slots
Display ATI Radeon 9000 Pro
- VRAM 64 MB DDR
- AGP 4x
LaCie external DVD Burner.
I'm planning on doing the following:
I'm on a limited budget, can only afford to spend around $300.00
I Want to add 3 more 512 MB Sticks of the Kingston KTA-G4333/512 PC2700 Ram.
Also, I Want to Replace my 80 GB HD with either of the following:
2 - Seagate 160 or 250 GB SATA drives/8 MB Cache on the Rear Bays
And a - SIIG SATA PCI Controller Card (SIISCSATM12S)
OR;
1 Seagate 160 GB ATA/100 8 MG Cache drive in the ATA/100 Bus Rear Bay.
And 1 Seagate 160 GB ATA/100 8 MG Cache drive in the front ATA/66 Bus Bay.
My Question:
(Which would be better performance wise and for stability?)
I only want to have 2 internal Hard Drives so my Mac won't over heat.
I'm planning on Cloning my 80 GB drive to one of the new drives using Super Duper.
After that, I'll store the drive until I can afford to get an external OWC case for it.
I want to use the second new drive for a Photoshop Scratch disk and for temp video file work.
Under 10.3.9 - I use:
Photoshop CS2
Toast 7
Popcorn 1.0.3
VisualHUB
On occasion I still boot into OS 9 for Photoshop 5.5., QuarkXPress 3.2.2 r5 and Adobe Illustrator 7.
I don't foresee being able to afford a Mac Pro and don't want to get a used G5 anytime
soon. I'm hoping my G4 will last me a few more years.
I suspect putting a ATA/100 drive on the ATA/66 Bus might hamper performance. And suspect using a SATA controller card in a "PCI" slot isn't as good as having a True SATA Bus, performance wise either.
I was just wondering which would be the better way to go for performance and stability?
The drives will be probably OEM either at OWC or NewEgg.
I'd really appreciate some help with this. Thank You.beardedbob wrote:
I want to use the second new drive for a Photoshop Scratch disk and for temp video file work.
Under 10.3.9 - I use:
Photoshop CS2
Toast 7
Popcorn 1.0.3
VisualHUB
I suspect putting a ATA/100 drive on the ATA/66 Bus might hamper performance. And suspect using a SATA controller card in a "PCI" slot isn't as good as having a True SATA Bus, performance wise either.
I was just wondering which would be the better way to go for performance and stability?
With those applications and the intended purpose for the 2d drive, i.e. video and PS scratch, then go SATA. No question, best performance (without considering the cost of SCSI) to be found with SATA even using a PCI SATA controller. PATA been left behind, no ones doing development anymore.
I would suggest partitioning that 2d drive because PS and FS scratch disks are different in kind. FS needs unfragmented media, otherwise dropped frames and sync issues. PS scratch media are temporary and messy.
Depending on the drives and card, SATA drives should bench (with something like Intech QuickBench) at the high end of around 80-90 MB/sec. I haven't bought a PATA HD in years, but best I ever saw was around 60 MB/sec. 80-90 MB/sec is still very good even if say you can bench better in Mac Pro.
The Siig card you're considering is solid. I've used it in both 10.4 and 10.5, but only used it to boot in 10.4.x, never in Leopard. I had some issues with it my others cards, but easily solved by swapping placement.
I also have the two-port Sonnet Tempo, which is actually just a purple Firmtek Seritek 2-port card. I bought the Siig first, having to get it (and a bunch of other stuff) shipped overseas. I later bought the Sonnet because I could get it locally although for a higher price; with overseas taxes, customs, etc. for only the card --- it's a wash.
Anyway, I have two WD SE16 750GB drives in my MDD 1.25 Dual, which were originally on the Siig. With the Siig, QuickBench (I run the big 100MB files) showed 70+ MB/sec Read, around 55+ MB/sec Writes. I was a bit disappointed about the Writes. When the Sonnet arrived, I swapped and ran QuickBench again. With the Sonnet I see both Reads and Writes at 80+ MB/sec.
So as far as benchmarks go, the Sonnet/Firmtek wins. (I know Firmtek has a line of internal cards, including a 4 port version.) But I can't say I noticed any huge difference in everyday tasks. I had some sleep issues with Sonnet/Firmtek in 10.4.x, which was solved by downgrading the firmware.
I have FC Studio, but I capture to externals via eSATA.
I still have the Siig, it's in my MDD 1.0 Dual used as a file and Time machine server. Has a Seagate Barracuda 7200.11 1TB on it which doesn't bench to well on the Siig, but I haven't tried bench testing it with the Sonnet.
Hope that helps. -
I'm 67 yrs old and asking for advice please.
I'm unable now to play the music in my iTunes playlists. 90% of the tunes have exclamation marks now and I can't 'locate' the music. How can I locate the music or remove the exclamation marks on my iTunes music list?Typical reasons for missing files are, you've deleted the files, they are on a disconnected external drive, or the drive has a changed drive letter, you've moved the folder where the files live in some other fashion, a third party app has rearranged the files, or iTunes has got confused about the layout they are supposed to be in.
Generally you need to work out what has happened, reverse the action and everything will be alright again. If it is something you can't/don't want to undo, e.g. a drive letter change, then as long as you can track down the current location of the folder containing the media then my script FindTracks should be able to reconnect it to iTunes.
tt2 -
What bit of "Please don't phone me" doesn't BT get...
What bit of "Please don't phone me" doesn't BT get?
I have experienced a cataloge of corrosponce with BT dealing with the bad broadband speed issues that I have had on my connection since last november. Too long to list here see the link below
Terrible broadband speed
Its fair to say that individual BT operators and advisors have been courtious and have tried to be helpfull most of the time but...BT have failed to find a long term fix for my issues.
The last month up until yesterday I was lucky enough to experience a wopping and reasonable steady 1.5 mbps...wow! Seriously it was fantasic! Compared to a miserable 0.3mbps or worse. I felt I was getting what I was paying for! Then the bill came in (and was wrong yet again!)! and coincidently? the speed returned to its former low!
Without baffling the humble user with scientific terminology, it turns out the problem is caused by line noise - not of my own making! Well, I noticed that incoming calls on the landline telephone were knocking my broadband out, after a while I made the desision to dissconnect the phone because of the issues with calls knocking my speed down. I imformed as many of my familly and friends not to call me on my phone and use my cell instead. However I can't stop random incoming calls, which sends the blue lights on my hub to flickering orange. This in turn equates to the stupid adsl2 software that BT use, knocking down my profile and hence speed!
When are BT going to get to grips with their stiffling system that takes up to ten days to recallibrate itself?
Their old system used to work fine at this rural address, quickly reasserting itself if there was a line knockout or interference - which is common in rural locations. Now it seems in order for BT to advertise super fast speeds to most that can benefit from it who live within a couple miles of the exchange. The rest of us that don't, have to suffer for the sake of this new adsl2 system. Its a shambles and at times heartbreaking and BT still expect us to pay the same as anyone else!
Dont be fooled. If you live in a rural location or more than two miles from the exchange, the chances are that if you are experiencing loss of BB speeds recently, whence before you had a reasonable service. Its down to the new BT adsl2 system they have brought in. Its not your fault, don't let the customer support advisors tell you otherwise! At least thats my experience!
The new system is more sensitive to noise, true it may be marginally faster, but as it turns out at what cost?
I have had a dozen engineers who have come round and each remarkably have "found and fixed the problem" then I get a reasonable speed for a few days before it drops again as of yet I have not had a pernament fix!
The loss of speed issues have led to a series of 'knock on effects' including my wireless BB BT mobile going beserk leading to a £260.00 bill for one month!
#Being charged £40.00 for Broadband phone calls I did not make - I had to call in the police for the theft of phone calls made before BT would take me seriously - they said there was no record and that it was impossible to hack BT broadband phones! In the end they found a 'mistake' but it was a **bleep** of a fight to get them to admit that!
Even after that, they cut me off (for non payment of these calls) and are now trying to charge me a reconnection fee!
Also I am paying for an 'unlimited' broadband package and broadband anywhere - which is a complete joke because I am lucky if I can get broadband anywhere at all!I know I really need to sort this out - but there is no one dpartment it seems that can deal with it all
After my BT Broadband Anywhere phone freaked out (Down to issues related to my BT hub losing connections - I ended up asking BT Mobile to dissconect my gprs for fear of it happening again - even though I was paying for the 'unlimited 'gprs service) and the 'stolen' BB phone issues, I dissconected my wireless completely!
So NO BB on my BT mobile, on average I am lucky if I get a week a month on maybe 1mbps, the other three weeks on 0.3mpps on my home broadband.
The trouble is that I am so sick and tired of being pushed from department to department and repeating myself on a weekly or even daily basis. I can never get one individual who can deal with all my problems in one go, #I am absolutely fatigued with it all.
Going somewhere else is not an option I am imformed where I live.
I have written letters to the customer service department and they have phoned me back and said things often at times when I am off-guard , so its hard to remember the details.
Now my policy is to have everything put in writing.
Despite using BT's 'contact us' form to report the latest speed issues and ticking the box that says
"respond by email" and stating "Please don't phone me" as well on my message body....I get a series of phone calls! Both on my mobile number and on my landline!
No comprehensible message returned as requested by email but phone calls from polite and friendly Indian help advisors...and guess what? The calls the BT staff have made on my landline, has knocked my profile down even further!
Even though I headed my message with "Please do not phone me on my landline phone number"
How ignorant is that?
I have even asked for my landline calls to be diverted, but that costs £5.00 pm - I don't see why I should have to pay for this.
What I would like is for one BT person who can sort out All of these problems for me
(That'l be technical department, security department, billing department, sales department, customer service department and more and then back again - I hav'nt got the stomach or time for being pushed from pillar to post!)
- but from BT that is probablly asking too much!
I fell I have had so many problems with the BT Broadband service, with the time I have spent trying to get things sorted, BT should be paying me! And they should take a good hard look at how their system works!
Bt have a **bleep** cheek to charge me £150.00 per quarter for all this!
My father pays £96.00 for this same service, gets 8.00mbpsm, can use his landline and hubphone, can use his wireless, plus BT vision as well - How fair is this?
I think its time for OfcomIt would be Otello and not Ofcom but in my experience they are very much in the pocket of BT (not least since they are funded by the telcom companies).
I suggest you try contacting the mods here and see if they can help
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’ -
Moving from 32-bit to a 64-bit OS how will this impact ebs upgrade process
we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?Hi;
we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?I assume your EBS single machine. EBS r11 is not certified wiht 64 bit OS.So you need to upgrade first than migrate it 64 bit
See:
32bit to 64 bit migration-EBS-Linux
EBS r12 migrate 32-bit to 64-bit.
32 bit to 64 bit 11i migrate
Migrattion of E-Business Suite.
Regard
Helios -
AI crashes when I try to open a file or make a new one. Any advice please?
I'm using a laptop and windows. AI starts up ok but I can't actually create anything before it shuts itself down. Any advice please?
Hi Tm,
Can you please check if there are any printers installed/connected on your system ? If yes can you please un-install/disconnect them and verify again ?
Thanks & Regards,
Raghuveer -
Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.
As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
Both of these can be used with Mail on any device. -
I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R
I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best. -
I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Load balancing across 4 web servers in same datacentre - advice please
Hi All
Im looking for some advice please
The apps team have asked me about load balancing across some servers but im not that well up on it for applications
Basically we have 4 apache web servers with about 2000 clients connecting to them, they would like to load balance connections to all these servers, they all need the same DNS name etc.
what load balancing methods would I need for this, I believe they run on Linux
Would I need some sort of device, or can the servers run some software that can do this, how would it work? and how would load balancing be achieved here?
cheersCarl,
What you have mentioned sounds very straightforward then everything should go well.
The ACE is a load balancer which takes a load balancing decisions based on different matching methods like matching virtual address, url, source address, etc then once the load balance decision has been taken then the ACE will load balance the traffic based on the load balance method which you have configured (if you do not configure anything then it will use the default which is "round robin"), then it will send the traffic to the servers which it has available and finally the client should get the content.
If you want to get some details about the load balancing methods here you have them:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/overview.html#wp1000976
For ACE deployments the most common designs are the following.
Bridge Mode
One Arm Mode
Routed Mode
Here you have a link for Bridge Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Bridged_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for One Arm Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for Routed Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Then as you could see in all those links you may end up having a configuration like this:
interface vlan 40
description "Default gateway of real servers"
ip address 192.168.1.1 255.255.255.0
service-policy input remote-access
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.1.1
class-map match-all slb-vip
2 match virtual-address 172.16.1.100 any
policy-map multi-match client-vips
class slb-vip
loadbalance vip inservice
loadbalance policy slb
policy-map type loadbalance http first-match slb
class class-default
serverfarm web
serverfarm host web
rserver lnx1
inservice
rserver lnx2
inservice
rserver lnx3
inservice
rserver host lnx1
ip address 192.168.1.11
inservice
rserver host lnx2
ip address 192.168.1.12
inservice
rserver host lnx3
ip address 192.168.1.13
inservice
Please mark it if it answered you question then other users can use it as reference in the future.
Hope this helps!
Jorge -
My Z2 tablet has yellow lines appearing on screen edges. Advice please?
My tablet developed a yellow line down the left hand side of the screen fairly early on. This was shortly followed by another line along the bottom, and now one on the right. Advice please?
Definitely a hardware fault, you should have no problem getting the tablet replaced, or repaired otherwise.
-
I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3
Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe -
I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?
Try the suggestion by Plusco here > https://discussions.apple.com/thread/3404394?start=0&tstart=0
Maybe you are looking for
-
[SOLVED] how to use diffrent iptables rules for different ppp account?
x86 plantform run arch linux system , have two network interface etn1 eth0 .eth1 connect to internet. eth0 connect to other terminals through switch. want use different iptables rules for different pppoe account .also want to know how to forbidden mo
-
I have 2 phones attached to my apple ID account and when I text message that person, I am getting a duplicate message sent back to me. How do I stop this from happening?
-
Dear All, Need help in MSS Reports. I have done the necessary setting for the MSS Launch Pad...but still a couple of messages are appearing on the MSS reports page 1.No controlling area was personalised. 2.No objects were personalised. Kindly please
-
Extension Icons: "'DarkNormal', 'DarkRollover' of attribute 'Type' on element 'Icon' is not valid.."
Sorry for the cross-post here, but I honestly don't know which forum this should be under (applies to both, as do most posts here): http://forums.adobe.com/message/5203522
-
Events Created in Mail don't show up in iCal
I just got Leopard for Christmas, and have since noticed that it is easier to add events to iCal from mail by just clicking on any dates or times contained in an email. However, a friend of mine sent me an invitation for something, and when I try to