Moving to Intel configuration

Having moved through the Mac family from a MacPlus in 1985, I am thinking about the new Intel machine, but cannot find any discussion or reliable writeup in a Mac magazine which deals with the practicality of such a move, so would appreciate someone telling me where to look.
e.g.
How do you handle all the data currently in Classic ? Run TWO macs, side by side ?
Does current OS X stuff transfer directly ?
Has anyone actually done the switch and is up and running ? Let's hear from you.
Eric

Here's a good place to start: http://www.apple.com/intel/
There are also MacBook Pro and iMac discussions you can read through.
In general there is no Classic or OS 9 on Intel Macs. Most OS X applications that have not been converted to universal binaries will run via Rosetta with some exceptions:
Rosetta supports "applications that run on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the following applications:
- Classic Environment, and subsequently any Mac OS 9 or earlier applications
- Screensavers written for the PowerPC
- System Preference add-ons
- Applications which specifically require the PowerPC G5
- Kernel extensions
- Java applications with JNI (PowerPC) libraries
There are many users who have switched to Intel Macs. Visit the abovementioned forums to find out what's going on.

Similar Messages

  • MOVED: HOW TO CONFIGURE ONLY THREE IDE DEVICES ON 945P NEO

    This topic has been moved to Intel P4 & Celeron P4 based board.
    https://forum-en.msi.com/index.php?topic=100703.0

    1) Wrong Section but no worries, I'll help you to move to the correct one.
    2) All caps wordings hurts my eyes. I can't help much as the CapsLock Key is on your keyboard .
    3) Try to swap the IDE drives among the controllers.

  • MOVED: MSI INTEL 945GZ mobo & Pentium D 820

    This topic has been moved to Intel P4 & Celeron P4 based board.
    https://forum-en.msi.com/index.php?topic=100905.0

    Pentium D 945 (3.4GHz) and Pentium D 915 (2.8GHz) are "ok"
    the others are "none"....
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=748&kind=1
     I guess I'll just have to see for myself when the new pc arrives...
    thanks

  • Moving/Exporting Seeburger configurations/objects from QA to Production

    Hi,
    I need some expert advise in moving Seeburger configuration objects like splitter adapter,AS2 adapter configurations from QA to Prod.
    Our scenario is like this , in the Seeburger message splitter we have defined the splitter adapter based on the AS2ID for different vendors/suppliers/customers. now when we go live on couple of customers every week, we are manually creating/configuring the seeburger channels in production. Is there a way to do it automatically like Exporting the objects in XI from QA to Prod???
    Any help is much appreciated.
    Thanks and Regards,
    Preeti

    Hi Preeti,
    For moving the congiguration objects from quality to production, you need to configure transport groups in the SLD so that when you are moving configuration objects from quality to production it will take Production R/3 system.
    For Transport Groups check the below links
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    But you need to manually change AS2ID and Partner Number according to production environment in the Party which you configured for each customer in the ID.
    Regards,
    Prakash

  • MOVED: New Intel Sandy Bridge benchmarks and overclocking results! 4.7Ghz!!!

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=144136.0

    Do you guys know if MSI will release a motherboard with Lucid HYDRA for the Intel Core i7 2xxx chips?
    That will be sweet!
    I think I'm going to return my MSI Big Bang Fuzion, I will wait 3 weeks and then assemble a new computer

  • Joomla on Azure - receive http 302 - domain temporary moved - custom domain configured

    hello,
    i have Joomla running on Azure websites and use the mode "Shared" because i need the custom Domain.
    dns lookup is fine and works perfect but when i browse
    www.mydomain.de i receive from webserver: mydomain.azurewebsites.net.
    I've check with netmon:
    1. browser send: GET www.mydomain.de
    receive a first http answer with: StatusCode: 302, Moved temporarily   -> Location: 
    http://mydomain.azurewebsites.net/
    Any idea how i can disable the temopory move stuff?
    regards
    Patrick

    Hi Patrick,
    Do you try to access your website now? Could your access your "http://mydomain.azurewebsites.net/" in your browser?
    I have two confused   points:
    1.Did your set your Azure website default page?
    2. Domain name need 12 hours propagation, Does it work now?
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MOVED: Hyper transport configuration on my K8N Diamond Plus

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=132723.0

    Old thread I know.  Still messing with it.  Put this opty 185 in and am pretty impressed with the chip.  It was Prime stable to 2965 MHz with no vcore increase and everything stock on memory timings.  Now stable at 3016 MHz with only a slight vcore increase and memoy still stock.  It really impresses upon me the fact of the individuality of each overclock and components.  The opteron 180 I had in previously needed a large vcore increase to stay stable at 2761 MHz.  For anyone who cares I'll continue to post on the oc until I exhaust the potential.  With you guys pushing around 4 and 5 Ghz out there I know this is just old news.   

  • MOVED: Help Configuring Raid 1 & Raid 5 on the P67A-GD65 (B3) motherboard

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=152612.0

    Quote from: Jack on 29-September-11, 16:56:49
    Please stop flashing the same version all over again, before something goes wrong.  
    It's great to have that info now... is it posted anywhere on the website?
    Quote from: Jack on 29-September-11, 16:56:49
    Please make sure that the memory frequency is manually set to DDR3-1333, the Command Rate to 2T and the memory voltage to 1.575V.  Then retest with all modules.
    I changed the frequency to DDR-1333 and Voltage but I don't know how to change the Command Rate or where it is located?  Any help?
    Also,
    I'm still having problems getting the system to recognize the Marvell RAID config when I boot with the VMWare ESXi 5.0 CD and try to select where I want to install... When I go into the Marvell settings the system it shows that  I have two dirves in RAID 1 Config:
    PD 0: ST31000528AS -> PORT ID = 0; PD ID = 0; Type = SATA PD; Status = Configured; Size 953869MD; Feature Support = NCQ 3G 48Bits; Current Speed = 3G
    PD 8: ST31000528AS -> PORT ID = 1; PD ID = 8; Type = SATA PD; Status = Configured; Size 953869MD; Feature Support = NCQ 3G 48Bits; Current Speed = 3G
    under the HBA 0: Marvell 0 settings it says the following:
    VENDOR ID: 1B4B
    DEVICE ID: 91A3
    REVISION ID: B1
    BIOS VERSION: 1.0.0.1027
    FIRMWARE VERSION: 2.1.2.1505
    PCIe Speed Rate: 5.0Gbps
    Configure SATA as: IDE Mode -> In the BIOS I have the settings to RAID
    Not sure if it matters but here's how I have the Intel Raid setup...
    RAID Volumes
    ID = 0; NAME = Storage; LEVEL = RAID5(Parity); STRIP = 64KB; SIZE = 5.4TB; STATUS = Normal (it's in green); BOOTABLE = Yes
    Physical Devices:
    Port Device Mod Ser  Size  Type/Status(Vol ID)
    0 Hitachi blah blah 2.7TB Member Disk (0)
    1 Hitachi blah blah 2.7TB Member Disk (0)
    2 Hitachi blah blah 2.7TB Member Disk (0)
    Any Thoughts?  I'm trying to boot from the two 1TB drivers setup in the Marvell Raid 1 Config and the Raid5 through the Intel for all my storage needs.  
    Thanks again for helping out.

  • MOVED: X79A GD65 [8D] Intel LAN Driver(s)

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=170315.0

    My Driver problem, along with Memory issues, clock and animations running double speed and Memory_Management errors BSOD have all been resolved since rolling back my firmware update. I also got all my ram replaced by Kingston so they all had the same revisions and this corrected the issue where 4 sticks were registering as different/slower ram.
    Not even the MSi LAN Driver worked prior to these changes...
    Sent from my iPhone using Tapatalk

  • MOVED: X79A-GD45 (8d) intel storage technology problem

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=163659.0

    Quote from: xmad on 26-November-12, 20:52:39
    No, you lose the data if you loose the array.
    What are you trying to do??? 
    If you want all single drives, switch to achi.
    If you want a raid 5 you need to create one / raid 0, inside of the raid controller bios.
    here is what i want
    i got 3 hdd's which are being used for as a storage for movies programs etc.
    and i got one ssd.
    i installed fresh windows 7 on my ssd .And i pluged the other 3 hdd's into black ports to use them as a storage as i used them before.
    everything worked fine.and i tried to install ahci drivers for my ssd with intel rapid storage tech. drivers.and when i installed that driver my hardisk disappeared ,they automatically became a raid volume.and then i break up the raid array to use them as a seperated.they became scsi drives in device manager under disk drives.and now here i am lost my datas

  • MOVED: Intel chipset recall

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=147079.0

    Lostcustomer wrote:
    My notebook should be allowed to be returned to the factory to be serviced for the bad intel chipset but instead I am being told that my problem is not going to be addressed because I waited to long to speak out!! And I could pay $50.00 for a service plan but they will not cover hardware, what type of customer service is that?
    The HP Pavilion dv7-3162nr Entertainment Notebook PC has an AMD/ATI chipset, not an Intel chipset.  Whoever told you it had an Intel chipset is mistaken.

  • MOVED: MSI Z77A-GD65 with Intel Xeon Processor E3-1245V2 - 3.4 GHz

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=162013.0

    Is this to be a gaming compuer or server I am confused 
    http://ark.intel.com/products/65729/Intel-Xeon-Processor-E3-1245V2-8M-Cache-3_40-GHz
    That mobo supports that cpu with the following bios:
    Xeon Ivy Bridge E3-1245V2 100 3.40 1M 8M E1 77 7751vA5.zip
    So more than likely you will need a supported cpu to flash to that version for it to work.
    If this is for gaming, there are better choices for the cpu though.
    Gaming:
    http://ark.intel.com/compare/65524,65523,65719
    As for the memory, we have seen the best results with corsair dominator or vengence memory.

  • MOVED: MSI Z77A-GD65 Intel 7 Series Motherboard Integrated Graphics

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=160617.0

    It's not the mainboard to have integrated graphics, it's the cpu. The Core i5-3570K has Intel HD Graphics 4000 integrated. The mainboard only offers the output connectors to use it. All current generation Intel cpus have integrated graphics which can be used or not. The HD Graphics 4000 is not meant for gaming of course and would perform worse than your GTX9800 in a 3d game. With a supported mainboard (like the Z77A-GD65) the integrated graphics can be used along the discrete vga for Lucid MVP to better performance and gaming experience (see for more details: https://forum-en.msi.com/index.php?topic=160519.0).
     

  • MOVED: Intel Management Engine windows 8 Pro

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=165534.0

    After several BIOS updates, this is still a problem (Same MB as the OP and sorry for Hijacking your thread Bud )
    I am on E7760IMSv1B1 and it still shows up as not recognized (1.8 Official off the MSI website did not solve the problem).
    It doesn't seem to be affecting the operation of the Motherboard but it is still annoying that it won't resolve.
    Win 8 64 Pro
    Edit - after reinstalling the MEI drivers AGAIN, the problem seems to have solved itself - cheers

  • MOVED: MSI mainboard P6N SLI+ Intel E8400 cannot boot

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=131399.0

    Yeah, that could be it.  So this applies to you as well:
    https://forum-en.msi.com/index.php?topic=123486.msg932471#msg932471
    Quote
    MSI emailed me again and stated that if the QC number (by the cpu socket) is 01, 02, or 03, I will have to have "parts added" to the board to make it compatible with 45nm procs.  I could send it to have this done

Maybe you are looking for

  • Credit and Debit notes in reference to Repairing invoice or Repair request

    Hi Experts! I create a Sales order ("RA") for repairing. My flow is complete and also billing documents are generated. The fixed price defined in the Repair request is copied into the invoice, and can not be modified (we block the change). If the pri

  • Help needed in SQL performance - Using CASE in SQL statement versus 2 query

    Hi, I have a requirement to find count from a bunch of tables. The SQL I have gives the count of all members. I have created 2 queries to find count of active and inactive members. The key difference is only the active dates. Each query takes 20 seco

  • Need to assign a multi datatype struct to a single field in Unicode system

    Hi all, I had posted an earlier question related to this to understand what the issue is. Few responses helped. Then now I have gone thru the conversion rules in Unicode systems related to assigning a structure (with different data types) to a single

  • CTI with PS CRM

    Does anyone have documentation concerning implementing CTI (component telephony interface) with PS CRM ("Cisco Unified CRM Connector for PeopleSoft")? I have no idea of how to implement this or where to look for information concerning integrating the

  • Keyword tags disappeared

    Hello. I am using Photoshop Elements Organizer 8. For some unknown reason, the keyword tags disappeared from my Organize tab and were replaced by a drop-down text box with all my tags. I can't figure out how to get my hierarchical display of tags wit