Moving video files from itunes to ipod

I cant figure outhoeto move my files from the itunes store to my ipod

http://www.apple.com/support/ipod101/tunes/3/
http://www.apple.com/support/itunes/musicstore/ipod/

Similar Messages

  • Trouble syncing video files from Itunes to Ipod

    I've downloaded a few videos through the iTunes store and they play through iTunes with no problem but when I sync to my new 32GB iPod Touch, I get the following message:
    "Some of the videos in your iTunes library, including the video "[name of video]", were not copied to the iPod "DC iPod" because they cannot be played on this iPod."
    On a previous thread about this issue ive seen that apparantly Ipods are unable to take 'HD' video, anybody able to tell me how to take the video out of HD because ive spent £20 on the 'Glory Daze' series and uploaded the new IOS server in hope of working but at the moment its just looking like a waste of £20

    It's probably a good idea to update your iTunes. However, you should be able to get an SD copy of the same TV Show.  Try right-> clicking on the show in iTunes and looking for an option related to downloading or using the SD version.
    Anything there?
    B-rock

  • Problems Moving Ripped DVD from Itunes to Ipod

    Problems Moving Ripped DVD from Itunes to Ipod
    I am having a problem transfering ripped DVD's from the Itunes Video folder to the actual Ipod. I thought one of the cool points of the Video Ipod was that you could play DVD's on it. I know I needed to use special software to achieve this since I researched it here. I am using Handbrake Lite since regular Handbrake look too daunting for me. I also used Isquint, since it was recommened here. I used both without changing anything on both of those progams other than click the go button. The DVD's will play in Itunes but it won't allow me to drag them to the Ipod. They are in the Video folder in Itunes. What in the wild, wild world of sports am I do'in wrong? I assume it's something stupid because the device is stellar. Hope someone out there can lend us a hand.
    Kind Regards,
    Julias

    I am having a similar problem, and i cant contact ipod 2 ask 4 help - its not explainedo online:
    my ipod will only upload video podcasts, no ordinary videos, except for one. they are all the same format (.MOV quicktime), and my i tunes has them all on it and plays them fine there, its just when i drag and drop or insert my videos onto my ipod any other way theydont get uploaded onto my ipod like everything else does, there seems no way that i can get my own videos onto it. only one video that isnt a podcast has ever uploaded, and its the same format as the others!
    Any ideas or help would be apprichiated ( i cant spell:P)

  • Updating music files from itunes to ipod

    hi,
    i'm having troubles with my 4gb nano.
    i'm using manually manage my files.
    i've dragged and dropped music files from itunes to ipod.
    but when i change the id3 tags of those files in itunes, then "update my ipod" from the file menu,
    it does not update (with the names, details etc) of those same files onto my ipod.
    is this meant to be?
    do i have to manually drag the "new" detailed music files again?
    thanks for the help

    OK so let me ask the basic question you failed to include in your post.
    First question is how is your iPod set up with respect to syncing with iTunes? Is it set up to auto sync everything, auto sync only specific playlists, or is it set up to manually manage ?
    Let's start with that and go from there.
    Patrick

  • Can't transfer video download from itunes to ipod

    I downloaded a m4v file from itunes I cannot view video in itunes and cannot transfer file to my 5th gen ipod. When I update my ipod it tell me it won't transfer the file 'because it cannot be played on this ipod' but no problems with transfering music.
    Just want to know if this is fault of mine or Apples and what I can do to rectify it.
    Any help is appreciated.

    Don't know if this will help, first off did iTunes Bill you for the download? If not try going to the Store tab in iTunes and check for purchases! possibly the file did not completly download or was corrupted!

  • How to import missing content for my music and video files from Itune online

    how to import missing content for my music and video files from I tune online.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Moving Album Images from Itunes to iPod

    How do I move the album images from iTunes to iPod? Can I do this without updating the whole song, for example just updating the album image. I'd like to keep my play count the same as the play count on my Library is much lower.
    Thanks
    G

    http://www.apple.com/support/ipod101/tunes/3/
    http://www.apple.com/support/itunes/musicstore/ipod/

  • Downloading audio from a video file from iTunes?

    I have a 40G 4th Gen click wheel iPod (no color or video). Is there a way to download just the audio from a video file that I have in iTunes?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • Moving Ripped DVD from Itunes to Ipod

    I am having a problem transfering ripped DVD's from the Itunes Video folder to the actual Ipod. I am using Handbrake Lite and also Isquint without changing anything on both of those progams other than click the go button. The DVD's will play in Itunes but it won't allow me to drag them to the Ipod. I assume it something stupid I am doing wrong because the device is stellar. Hope someone out there can lend us a hand.
    Kind Regards,
    Julias

    I am having a similar problem, and i cant contact ipod 2 ask 4 help - its not explainedo online:
    my ipod will only upload video podcasts, no ordinary videos, except for one. they are all the same format (.MOV quicktime), and my i tunes has them all on it and plays them fine there, its just when i drag and drop or insert my videos onto my ipod any other way theydont get uploaded onto my ipod like everything else does, there seems no way that i can get my own videos onto it. only one video that isnt a podcast has ever uploaded, and its the same format as the others!
    Any ideas or help would be apprichiated ( i cant spell:P)

  • Adding video file to iTunes for iPod classic

    I have a few home videos that I would like to put on my iPod classic. When I attempt to add the video file to the library, it never appears under video. What format does the video file have to be for this operation?

    as per:
    http://www.apple.com/ipodclassic/specs.html
    Using quicktime pro is one of the better ways of producing iPod compatible video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats

  • Qosmio G50-12Q: No audio while moving video files from camcorder

    Good Morning
    I have a portable PC Toshiba Qosmio G50-12Q with 640GB of HDD and 4GB Ram equipped with seen the Window system Completed modernized to service version pack 2
    I connected the video camera Sony PC 115 to the PC through the I.Link IEEE 1394 cable while that I am importing a determined video to the Window Movie Maker in order to record it.
    At this moment in which it comes reproduced in the screen of Movie Maker I see the reproduced video from the video camera but do not feel the audio. When then I have ended to import the video I go and it always see again in Movie Maker, the program regularly reproduces or the video that it has recorded or the audio that exactly I did not feel it was importing while it.
    It' is to regular ?
    Task that in phase of import I would have to feel and to see or that video audio. Not task that is the defective cable because when I see the recording of the video in Movie Maker I feel also the audio base, wants to say that the audio has exited from the video camera, entered in the PC through taken I.Link has recorded that it.
    To the aim i can hear the audio in phase of transfer / import from video camera or any other audio apparatus / video I must for case to modify inside of Window Movie Maker or in Seen Window some formulation detail that it regards also the taken I.Link specifically ?
    Or the cable goes connected between video camera and PC with details sagacities? Even if me it seems to have connected well it perche' as I repeat l' audio comes recorded.
    Thanks and salutes

    I have Sony camcorder DCR-TRV520E to and in the past I have recorded several movies on my notebook.
    I have used Ulead Movie studio application and everything was OK.
    10 minutes ago I tested it with Windows Movie Maker (Vista) too. Here some facts:
    - My Sony cam was recognized properly
    - Started Windows Movie Maker and chosen option IMPORT > From digital video camera
    - Browsed into right folder
    - On next step from alone application started rewinding videotape
    - Importing video started from alone and when finished I checked it and sound was there.
    Later I chosen option "Publish to" > This computer and after 20 minutes everything was finished.
    I use simply firewire cable. Nothing special.
    I really don't understand what is wrong there.
    Is this first time you do this?

  • How can i move a video file from itunes to my camera roll

    I am trying to relocate vids i made with another device and imported to my itunes to my camera roll or other app (files box, private camera, photofolders etc...) Is it possible? Will I have to change the video formats? They are all mp4 vids.

    If they are in a compatible format then you should be able to sync them by selecting the iPad on the left-hand sidebar of your computer's iTunes (on iTunes 11 you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and then use the Photos tab on the right-hand side of  iTunes  to select the folder that they are in on your computer and sync them (if you are already syncing photos to your iPad then you will need to include their folders with the sync, otherwise they will be removed from your iPad)

  • Importing sound files from itunes to ipod

    I have used office for mac word notebook to record lecture audio, and then exported the sound file (.mp4) into itunes without any hassles. However, I haven't been able to drag them into my ipod when it's connected - any suggestions how I can do this?

    OK so let me ask the basic question you failed to include in your post.
    First question is how is your iPod set up with respect to syncing with iTunes? Is it set up to auto sync everything, auto sync only specific playlists, or is it set up to manually manage ?
    Let's start with that and go from there.
    Patrick

  • Uploading .wav file from ITunes to IPod as mp3

    All the cd's I have added to Itunes are in the .wav format to achieve highest quality for playing on my pc or other external systems. I would like to download these file to my Ipod as MP3, but cannot seem to find a way to download and convert without changing the format in my library before I send the files to the Ipod which would leave me with a library of MP3 files.
    Any suggestions would be appreciated
    Windows XP Pro

    I have iTunes set to not update almost all podcasts, because I want the kind of control you're asking for.
    To get episodes onto my iPod I drag the ones I want into a playlist that is set to update on the iPod. That way I get exactly the episodes I want, in the order I want them. Essentially, each one of those playlists is radio magazine made out of exactly what I want to listen to, and I don't have to mess with the iPod controls while I'm walking.

  • Why can't I transfer 24 bit m4a files from iTunes to iPod?

    Im trying to transfer, what was originally a FLAC and is now converted to m4a, to my ipod touch 5 in iTunes. It transferred to iTunes just fine, but when I drag the album up to the top right corner of the iTunes window where my iPod shows up when its plugged in, it just doesn't copy ANY of the files in the album. No error messege or anything, it simply just doesn't even transfer it.

    iTunes is quite good at failing silently if it doesn't want to do what it is asked. It doesn't say so explicitly here - http://www.apple.com/uk/ipod-touch/specs.html - but I suspect that there might be a limitation to 16-bit audio on Apple's devices. Wrong, seems the issue is more likely to be the sample rate. See this old post.
    tt2

Maybe you are looking for

  • Q180 and Windows 8 Upgrade

    Has anyone given Windows 8 and try on a Q180?  I want to since I only use the Q180 as an HTPC and the Windows 8 interface seems like it would be pretty awesome for a display such as a big screen TV.  Just wondering if there's any issues out there rig

  • How do I close IMAQ sessions and freeup memory for 3 Camera While Loop continuous Acquire?

    1) I am using an NI PCI-1428 Camera Link frame grabber to interface with a Pulnix TM6710-CL digital camera. I use the latest IMAQ drivers. When I try to work on 3 cameras (as in the NI example program for single HL Grab), it looks like not freeup the

  • Fading Images w/ javascript - need help for IE

    I'm trying to avoid flash and thought I had a good solution but somehow it seems to not work in IE, but works everywhere else. I really have no idea how to trouble shoot something like this but this is what I've got: if I take the images and put them

  • Firefox keeps crashing on me and I am not sure why.

    Recently Firefox keeps crashing on me A LOT. It has already crashed three times in the past two hours. Any help would be appreciated. Here are some of the crash reports: bp-4fa87ac3-462e-4c8b-b70b-0ae862140716 7/16/2014 2:13 AM bp-bc1e7f0f-f371-4b76-

  • Lockscreen long delay

    Hi all, I have a problem with my iPhone 3G response of the lockscreen. When i lock my phone and i dont use it for a few minutes and i want to unlock it again, i press my powerbutton and it takes about 10~sec for the lockscreen to come up. If i press