Moving wireless controllers to another site

I am planning to move our WLC's (5508) from a branch site to HQ so that all branch site APs will just report centrally in the HQ.
There are two WLCs working as Active/Standby. Plan is to move one then the other. Any plans, tips or advise on how I could accomplish this?
I am not really inclined with wireless.

Its pretty simple... You move one and make changes to that WLC (IP address, etc) and then configure the mobility group to reflect the new ip address of the WLC. Then you would change the ap's primary wlc to be that of the one that will stay (just in case) and set the secondary to the one that will move. Verify that the mobility is up between the two WLC's after you move the on to HQ. When you have connectivity between the two WLC's and the mobility is up, go ahead an set the primary to one of the AP's to the WLC at HQ's and the secondary to the WLC that didn't move. If the AP's joins the WLC at the HQ, you are good to go to make the changes to all the other AP's (of course if you have enough license). Then do the same procedure with the other WLC.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml

Similar Messages

Moving Oracle Discoverer to another site

I am asking advice as a complete layman and a non-technical person who has been handed a task!
We have a set up where we use/share Discoverer along with a separate site down south where the Discoverer is actually situated.
Our databases are outhosted in Maidenhead.
Our base office is up north where we have a secure dedicated line to our database. I have been told we presently have to ping all over the place to use Discoverer.
What would I need to do to get our own independant version of Discoverer set up in our northern office using our dedicated direct line to access our data?
Is it as simple as setting up a new server for discoverer up north and recreating all of our links to the data again or is it much more complicated than that?
Also does anyone have a rough idea of how much this would be likely to cost? (Then I can prepare my bosses for a shock before getting an exact quote!)

Hi,
Are you using the web based tools Discoverer Plus/viewer or are you using Discoverer Desktop?
If you are using Discoverer Plus/Viewer then this uses a 3 tier architecture. So tier 1 is your database containing the data, tier2 is the application server containing the Discoverer software and tier3 is the browser/applet on your PC. If you want to move Discoverer then you could install a new Application server (tier2) while still using the same tier1 database. You could also install a new database server (tier1), but then you would need to replicate the database and that is more complicated.
If you are using Discoverer desktop then this connects directly to the database so any routing would be at the network level.
Rod West

Moving 2nd Exchange 2013 server to another site

Hi there, looking for some insight into a task that has been assigned to me. We have two Exchange 2013 servers setup in a DAG environment. I've been asked to move the secondary to another site. If anyone has gone through this process, do you have any suggestions
or tips
Off the top of my head
Maintenance mode enabled on secondary exchange server
Shutdown VM
Copy to External drive
Ship external drive to secondary site
Create VM and assign new IP
Ensure DNS name for secondary is pointing to the new IP
Boot and turn off Maintenance mode on secondary server
Ensure DAG is replicating over
Questions
Do I have do change anything to ensure exchange realizes it's now off site? The new IP that will be assigned is bound to our secondary site in AD. Example 10.333.333.* = DR-SITE.
Anything I've missed in the steps brainstormed above?
Thank you to all who reply. I am somewhat green when it comes to Exchange but am trying my best to research.
-TSGzz

I would probably take a different approach if possible:
Build new Exchange Server in New Site (making sure storage passes).
Configure Vdirs and add to dag
Add Database Copies
Once database copies are seeded remove old server from the dag and retire it.
I like this method better, b\c you still keep some high availability while you are getting the second site together. PLuS you don't end up not being able to prune you log files since replication would be so far behind once you stand up the server in
the new site.
If you can't do that your steps look like they cover everything.

Mysterious moving wireless mighty mouse...

I've noticed that my wireless mighty mouse, although sitting quietly on the desk, appears to be moving the onscreen pointer around the screen. This has been interfering with my use of TextExpander which I use to expand text snippets, so suggests that there's something wrong with the way the wireless mighty mouse is responding to being at rest. I've gone over to using a wired mighty mouse and don't see this behaviour. Anyone else getting this?
Should I just give the mouse to my cat? Or should I phone Apple?

Try taking the battery out of the mouse and putting them back in. Also, make sure nothing is blocking the LED.
Are you able to use your iMac with a regular wired mouse? In other words, if you use another mouse, does it function normally?
Otherwise (if the above is not helpful), it seems likely that the mouse is defective. You should take it back (or to an Apple Store) for replacement under warranty.

Is there a way for a site owner to copy a custom calendar that resides on a site on one site collection to a site on another site collection?

A user contacted me about copying and moving information from an old site that is being retired to a new site.
The most important info is the department calendar.
I don't see a way to use the "Manage content and structure" functionality to copy or move a calendar from one site collection to another.
And site owners do not generally have enough permissions to create templates into the gallery.
Is this just not possible for him to do on his own?
Thank you for your help!

I gave up and created templates for the site owner and created the corresponding list for them on the new site.
I was startled to discover that even though I said I wanted to include all content, the 4 columns that were of type "people picker" did not, for the most part, transfer.
So the columns will have to be manually entered. But at least the rest of the effort is done.

Why did moving pages to a different site cause scary glitches?

I'm an advanced iWeb (3.0.4) user with two iWeb sites: the OLD one, and the NEW one. I built all-new pages for the new site, but I dragged in two MOVED pages from the old site. Once I did this, the site will not publish. "Publish Error: an unknown error occured."
There's a few other symptoms:
-I cannot move the moved pages back to the old site. When I try, the blue "drag/drop" selection box freezes, and the pages do not drop where I drag them.
-I cannot delete the moved pages. When I click delete, nothing happens.
-When I click on the moved pages to view or edit them, they do not load. The iWeb window stays blank.
-The site will not publish to MobileMe or a local folder.
-The old site still publishes.
These solutions have not worked:
-Deleting the .plist and rebooting / clearing the cache.
-Moving the Domain file, creating a new blank site, deleting the new blank site, replacing the Domain file.
-Transferring the Domain file to another Mac and publishing from the new Mac.
I wish I could sit down with an iWeb expert and sort this out. Any tips from you guys?

Do you have a backup copy of the Domain.sites2 file you can revert to?
Can you delete items from the two moved pages (make a backup copy of the domain file first)? If you can try deleting an item and try publishing to a folder. Keep that up till you can publish. Then open the backup copy and delete that last item and see if you can publish. If it's just one item that's causing the problem this might be one way to isolate it.
OT

Best wireless deployment at Remote Sites - designe

Dears,
I have many remote sites with Hub and Spoke topology, and I have Cisco wireless controller 5508 on our HQ serve the wireless network at HQ (approximate 25 Aps)
The business need to deploy the wireless on RSs for public customer (not for employees).
I have concerns about security if we going to terminate the SSID - for public- at Remote sites toward HQ over WAN connections (viruses, malware, sniffing … etc.) to control it using our Cisco wlc even if I terminate the vlan represented this SSID toward our firewall (on dedicated DMZ), and congestion will happen since this SSID will be used by the public (Non-employees persons).
Please your kind suggestion.
Thanks in advance

Hi,
For you scenario.
Below deployment will work
http://www.cisco.com/c/en/us/support/docs/wireless/flex-7500-series-wireless-controllers/113605-ewa-flex-guide-00.html

Assign the Bookmark Tag from 1 site to another site which has none

The majority of the Web Sites which I've Bookmarked have Tags assign [assume they did it themselves]. But, a few of mine have none whatsoever. How can I use another site's Tag since they are similar in nature (i.e. Health, Exercise, Food, etc.)

Anton ~ iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). That's the file you need to transfer to your other Mac — not the published (HTML) files. See also NOTE 1 here:
http://iwebfaq.org/site/iWebTwocomputers.html
To open a site in iWeb, double-click its Domain file. See also this article:
_How do you manage multiple domain files for iWeb?_

Migrating SAPCPS to another site

Hi all,
We are looking to migrate our SAP enviroments to another site including the SAPCPS scheduling application. Is there a straigtforward procedure/facility to migrate/rebuild the SAPCPS software and job scheduling setup without having to manually reimport and reschedule all the jobs again?
Many thanks for any help you can offer.
Kind Regards,
Jason

Hello,
If you are moving the Netweaver system CPS is running on as well you can migrate the database and deploy the CPS application again and everything should be up and running again. Probably you will have to do some configuration after the datacenter move if the connection string to the SAP systems has been changed, but after redirecting the Process Servers you should be ready to roll.
Regards Gerben

Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

When I open a new tab it does not bring up my homepage. It brings up another sites search engine page.

When I click on the new tab button, a small cross, it opens the new tab, but displays another sites search page, not my homepage. I cannot find where to tell it to open my homepage on all new tabs that are opened from the tab bar.

The basic Firefox build has always opened a blank page when you open a new tab.
Maybe some add-on you installed modified that feature of Firefox which now opens all tabs in a different page. Here's what you will need to do.
Open Firefox -> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. The tabs will now be opening in a blank page. You can Enable the add-ons again and check if its working properly.

ProjectCenter Webpart on another Site Collection "This Web Part was unable to load"

Hi,
Project Server 2013 on an url like http://domain.tld/pwa
Trying to use the Project Center Web Part from another site collection, let's say http://domain.tld/sites/siteA
I get the "This Web Part was unable to load" error and in the ULS I get Object Reference not set to an instance of an object classic error
What am i doing wrong?
Thanks!

Thank you for the thoughts Michael but none of those worked for me.
What I have done so far is I have added the PWA features to the site which is what has made it work when logged in under the farm account.
So I have 3 account I am testing with
1.) regular account with read only permissions to the Publishing page
2.) Admin account that is in a group that is a site administrator to ALL sites
3.) Farm account
Currently it works for the Farm account and the Admin account but not the regular account. I have added the regular account to the same group as the Admin account and will test when the change updates to see if I can access the information. This
will at least let me know that it is a Permissions issue which is what I think it is I just cant figure out which permission it would need to be.

File not found when adding a link to another site collection on the navigation page

When I am adding a link to another site collection in the navigation page, I got the following error. Is there any limitation for the navigation setting? why can't we add a link to another site collection in the navigation page?
This is SharePoint 2007

Hi
the URL provided is working? (check it in separate browser window )
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

How on earth do I update my Apple ID to my new email address? I keep getting moved to 'change my password' sites, but I have a new email address and need to update my Apple ID.

How on earth do I update my Apple ID to my new email address? I keep getting moved to 'change my password' sites, but I have a new email address and need to update my Apple. Frustrated!!

Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

Moving wireless controllers to another site

Similar Messages

Maybe you are looking for