Moz. crashes or never opens. We've just added newer ver. of spyware could this have anything to do with it?
we had to renew spyware which I believe was a newer version. We never had any problems running spyware and moz. before now. Oct. 31 2010 was when we added renewed spyware. about the same week we started having trouble with moz. crashes before opening. We downloaded newer ver. moz. still having problems. Help!
Can you give me the Crash Report ID by opening Firefox in [[Safe Mode]] and going to '''about:crashes''' in the Address Bar?
Also if no reports are submitted, try disabling addons one by one to figure out which one is causing the problem.
Similar Messages
-
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
I have a new iPad and am trying to open my Uni website. I have allowed pop ups but it just opens a new blank page. I'm using a sim not wifi, would this have anything to do with it?
Thanks again ...
This trouble is fairly new as I just got my MacBook Pro. It's been going on for 2 weeks or so. Prior to the MacBook I was using my old PC laptop and never had any difficulty.
Nobody else seems to be having this problem at school and IT is completely unhelpful. I've been told that nothing's wrong with the uni's internet/network, it's my laptop.
Could it be that the uni's network doesn't recognize my new Mac's IP address (I think that's right) and for some reason is blocking access?
As for the VPN idea - I think I get it. Can I set that up myself? -
adobe keeps crashing, you can be on a web page reading and the browser opens the page in a new browser. I did not have this problem the older versions. What can I do to fix this problem.
See [[Firefox keeps opening many tabs or windows]]
-
in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?
Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M -
When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.) -
I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!
There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing! -
I do not know if this has anything to do with my problem or not. I just recalibrated my battery and now cannot remove anything from the dock. I have moved it half way up and held it and it just goes back to the dock. Will not let me even put it in the trash. I am new to the macbook so would you please help me?
There is NO calibration on a modern macbook
Battery calibration, battery memory, battery overcharging, battery training, …all these concepts are mostly holdovers from much older battery technology, and on older Apple portable Macbooks ranging from early nicads, NiMh and otherwise; and these practices do not apply to your lithium battery and its smart controllers.
Current Apple portable computer batteries are pre-calibrated and are not to be calibrated
http://support.apple.com/kb/ht1490
There is no battery calibration with current Apple portable Macbooks with built-in batteries. Lithium batteries have essentially a 0-‘memory’, and all such calibration involve the estimations fed to the system controller on the SOC (state of charge) of the battery over long periods of time as the battery degrades. The software based battery controller knows the battery's characteristics, or SOC and adjusts itself. This is why there is both no need and purpose to periodically deeply drain your macbook battery, since it doesn’t affect the characteristics of the battery, and further still deep discharges are something you should not do on purpose to any lithium battery. -
I cannot open my phone as the screen will not work. I have made an appointment with a technician tomorrow but is there anyway of backing my phone up to Icloud so that I do not lose any of photos etc etc?
PLug it into yrou computer to sync/back it up.
Is it set to back up to iCloud now?
Or do you have wifi backup enabled in iTunes?
Plug it in while on wifi and it will automatically back up. -
After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13What is the exact name of the application you're trying to launch? Is it in the Applications folder?
-
Accidentally changed cache location and the app crashes and never opens
I recently changed the cache location to an external usb and whenever I try to open the app t crashes and gives me an error pop up. I cant change the cache location back to default since I can never open the app, feels like a catch22 situation. A simple reinstallation didn't seem to work. Any suggestions?
Hello: Wait you changed the cache location folder for the spotify desktop spotify app, or changed the location for a system wide cache location? If you did a system wide cache move your probable going to run into all kinds of isssues. Would not it be a smart idea to plug in the USB device that was used in the change of cache location, and then try to launch spotify and see if it loads correct and finds the hacked moved new cache location? What about trying to retrace your steps in how you changed the default cache location, and just reverse the process to move the cache location back to it's default location, using the terminal system folder linking process, and then try to see if spotify will launch properly? I mean your on a Mac is your HD that small? I thought that was one of Apples selling points, larger memory run abilities, and larger HD space for their systems? Does not Mac have something called Time Machine, have your tried that route to fix the lost Cache location folder?
-
Indd file crashed and never opened in cs6
I worked at last night and when i was designing the last page,
ID suddenly broken and I got a window error message.'Objectmodel.dll' error...
but i didn't worried about it, bcz i saved file safely a hour ago before error comes out,
so opened it, surely, ID asked about auto recovery, but i canceled,....
and...
i was surprised bcz even though it was saved a hour ago, it also crashed!
Auto recovery file is also samely crashed....
I tried many things such as installing new cs6 at my sister's computer, and cs6 on my another computer of my company,
and I found another indd file is smoothly opened, and ID is so normal...
but only this file never open again... constantly loading indicator moving....
this situation is started when it loads 36p (all pages 41p)
bcz this file loading is not finished, I can't open this file in every computer that i have..
so I found a way to place all pages on new file on this forum, but i can't , bcz it never open!
I have Macbook air, and also i tried to open it, but in my Macbook,
i installed CC version, so I also can't open it in Macbook...
somebody help me..!
Is there any way to delete from 36p? (bcz i think this page have some ploblem maybe)
or.. another way to fix it?It sounds like the file is damaged from the crash if it won't open on another computer, but you can try the blind-open export to .idml script here: Adobe Community: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
-
This started yesterday afternoon, where Firefox crashes immediately upon opening. I do have a lot of tabs that open upon start (this is done with the "Morning Coffee" add-on), but this has never been a problem before. This morning, I had 5 separate crashes, all in a row:
Signature: memmove | nsCacheMetaData::SetElement(char const*, char const*)
Signature: PR_EnterMonitor
Signature: _PR_MD_PR_POLL
Signature: memmove | nsCacheMetaData::SetElement(char const*, char const*)
Signature: memmove | nsCacheMetaData::SetElement(char const*, char const*)
However, I WAS able to open up Firefox and get it to run without crashing when I did so with no tabs automatically opening.
Can someone help?
Thanks !!!!You can post the ID of the crash report instead of the full crash report.
*bp-daecec88-b15e-474b-8ebc-4af9b2141118
This is an out-of-memory crash where all available memory is used up.
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware
Maybe you are looking for
-
Hi, My requirement is adding fields to an existing structure in LSMW batch input method and performing validations on those fields as follows 1. Alternative Priority should be numeric 2. Alternative Starategy
-
I have a problem with my install java software, it won't run websites that require java. I am trying to access a web pages that requires Java applet 1.4.2. i have J2SE 1.4.2 and J2SE 5.0.. Yet the web page still won't load i tried firefox and safari
-
Unfortunately messaging has stopped
This keeps coming up and I'm not receiving messages. I've noticed other people have had this problem. When is this going to be fixed!?!
-
Home folder stopping me from opening the mail application
Ok this may sound stupid, but what and where is the home folder so tht I can delete documents in it to access the mail application?
-
What happens after card reset (from JCRE perspective)?
Hi, In windows environment, to keep state of application, i cam imagine that data is serialized and saved to a text file. On second app invocation, the data from text file is reloaded to reconstruct objects and form the last state of application. In