Mozila android beata version support in video chating ?
Anish manathoor
hi, currently the conversation has to be initiated by a desktop user - but if you have a call link you can also take part in a call via firefox on android (firefox hello works without the need for plugins)...
Similar Messages
-
Which versions of Final Cut Pro support HD video?
Which versions of Final Cut Pro support HD video? (Other than 6)
Uncompressed HD...that can be done with FCP 4.5 or higher. But as said, you need a capture card, no matter what version you use.
DVCPRO HD support started in FCP 4.5. P2 DVCPRO HD support started with 5.0.4. HDV support started with FCP 5.0, and is much better in FCP 5.1. XDCAM started in FCP 5.0, better in 5.1. AVCHD requires 5.1, and AVCIntra requires FCP 6.
Shane -
My flash player didnot support such video and the version is too low
I have checked in your internet, it told me Flash Player is pre-installed with Internet Explorer in Windows 8. and Either Flash Player is disabled or ActiveX Filter is ON. But i really find Flash Player is enabled or ActiveX Filter is Off. For flash play, it can play most of flash video, however, it shows my flash player didnot support such video and the version is too low. In fact, the my downloaded version is the laterest. how can i fix the problem? thanks.
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
Try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
Flash "Display settings" window:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html -
Does iPod Touch support anamorphic video?
Does anyone know if the iPod Touch support anamorphic video?
The latest version of Handbrake now allows "iPhone-compatible anamorphic video at its full size" - although how that works in practice I don't know...
-
Does iMovie support 4K video editing and export?
Does the latest version of iMovie support 4K video export? I have seen that it supports XAVC-S from Sony, but I do not know if 4K XAVC-S is supported too.
Thank you for answer.
P.S.: If not, would it be able to in near future?Hi Tomas J
the problem is that if you have nothing but 4k XAVC clips in the card and you try to import from the Import window
FCPX will not see the card as a Camera and only as a Volume. You cannot do Camera archives from a volume but you are able to do Camera Archives if it is detected by FCPX as a Camera. The reason I like to do Camera Archives is that that way I transfer the whole content of the SD card in one pass to a container that I can transfer to any HD that is hooked up or connected to the computer usually avoiding the main or boot drive and I can bring that container or Archive into the Favorites column of the import window pf FCPX ,opened and start importing from there. This has two main advantages 1 Once I create the archive and have all my clips in its container I can wipe the card clean and start using it again, 2 If I placed it in the Favorites colum of the import window I can open it and start importing to FCPX as if it was any card, Also you can move this container or archive any where as long as it is connected to your computer and if you have finished and don't plan to use it anymore you can store it for keeps with all the original files you shot in any storage for keeps. You also preserve the file structure of the SD card That is why I need FCPX to recognize the SD card as a CAMERA AND NOT AS A VOLUME when using 4K XAVC-S clips. The way you are doing it may be ok up to a point only for a few clips here and there but if you're preserving or making a Movie of you vacation or other events that would be an Immense task.
The Sony AX-100 camera that you have has the same file structure that the AX-33 if you import nothing but 4K XAVC-S clips without mixing mp4 or AVCHD ON THE SAME CARD Have you found the same problem????
Thank You,
AppleLou -
I have an IPAD 3 and recently updated the IOS software with the latest version and now video from some sites will not display where it did prior to the update. When I go to those same sites on my other IPAD that I did not do the softward update the video still works. Any idea why and what to do to fix it?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Cheers, Tom -
Does FCP X has multi cam option? and it support VOB video file ?
Does FCP X has multi cam option? and it support VOB video file ?
Jeaux wrote:
Premier is a bloated Windows app first, ported to Mac. I seriously suggest you download the trial version of Premier before you drop $800. for it (or $1699. for the suite.), and see for yourself if it's all that.
Is Adobe software overpriced? Opinions vary.
And FCPX is a bloated inefficient Apple app not ready for prime time, but will function nicely as a hardware upgrade requirement, it's already started. Why do you think it's so cheap.
Apple makes their money via hardware.
pancenter- -
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
How can I create multiple versions of a video within the same project?
OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room. -
Windows server edition/version supports installation of ERP 6.0
Hi ,
I am trying to install Solution manager 7.0 ,ERP 6.0. on windows OS.
and Oracle database.
My OS : Microsoft windows XP Proffessional version 5.1 service pack 3 (32 bit)
RAM Size : 2 GB
Could anyone give me the hardware and software requirements for installations of solution manager 7.0 and ERP 6.0. on windows.
which windows server edition/version supports installation of SOL MAN 7.0 and ERP 6.0 ?
thanks.> Does Microsoft windows2008 server edition / windows 7/vista supports installation of ERP 6.0 .
Did you have a look at the PAM as suggest at http://service.sap.com/pam?
Vista/Windows 7 are client operating systems and are not supported for ERP 6.0 or Solution Manager or any other backend.
Markus -
What's the postscript version supported by Preview
Can anyone please help me with postscript version supported by Mac Previewer V 6.0.1
Postscript version of what - a font?
-
Does Mac support 1080p video?
Does mac and imovie 11 support 1080p video?
"Got your "Ins and Outs of iMovie" eBook; did not finish reading.
Read Appendix B (720p) or C (1080p). Here is some additional information for you:
When you next launch iMovie, and create a new project, the Project Properties will show 25fps or 30fps.
However, when you drag the first 50p or 60p clip into the project, when you check Project Properties you will see the fps field is blank.
Do not click in this Properties field.
From this point onward, iMovie will work at 50fps or 60fps.
Animated effects created by iMovie will be, however, created at25fps or 30fps. Each frame will be repeated twice.
iMovie must now process twice the number of frames per second, so it may be more sluggish. -
Does quicktime support flash video or flv format
Does quicktime support flash video or flv format
Not natively; it only works if Perian is installed, and then only in Mac OS X 10.8.5 or earlier.
(112327) -
Has anyone got dynamic version support to work with the HTML converter?
I have tried this for some time and followed all the guidelines, but it still don't work. Could someone post the HTML-code for a working applet that is converted with dynamic version support ?
Using 1.4.1_03
java -jar htmlconverter.jar -gui
selected directory, "Standard" template file, "Use any Java 1.4, or higher"
<html>
<body>
<!--"CONVERTED_APPLET"-->
<!-- HTML CONVERTER -->
<OBJECT
classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 200 HEIGHT = 100
codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4-win.cab#Version=1,4,0,0">
<PARAM NAME = CODE VALUE = Version.class >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.4">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
<EMBED
type="application/x-java-applet;version=1.4"
CODE = Version.class
WIDTH = 200
HEIGHT = 100
scriptable=false
pluginspage="http://java.sun.com/products/plugin/index.html#download">
<NOEMBED>
</NOEMBED>
</EMBED>
</COMMENT>
</OBJECT>
<!--
<APPLET CODE = Version.class WIDTH = 200 HEIGHT = 100>
</APPLET>
-->
<!--"END_CONVERTED_APPLET"-->
</body>
</html> -
Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problemsLook, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.
Maybe you are looking for
-
Payload Swap Bean in SFTP adapter
Hi , I want to use Payload Swap Bean in SFTP Receiver adapter. Please tell me the flow. Regards, Manigandan
-
Hello folks I've tried every option I can to self support, from disk repair to deleting caches (I don't usually use the appstore so don't have one), and I don't have a pckge file either. I'm on a corporate network that restricts access to iTunes, so
-
JDBC URL Configuration for UDConnect in BW 3.5
Hello, We are experiementing with UDConnect on our BW 3.5 sandbox system to try to connect to an external oracle database using JDBC. The UDConnect configuration requires the input of the JDBC driver name, which I believe in our case is oracle.jdbc.
-
Why not to use static methods in interfaces?
why?
-
Calling subclass/method in a parentclass
class A extends Frame implements ActionListener Button ok; public void actionPerformed (ActionEvent ae) try if (ae.getActionCommand().equalsIgnoreCase("OK")) /* HOW DO I CALL CLASS B OR METHOD IN CLASS B ONCLICK OK BUTTON*/ catch(Exception e) System.