Mozilla freezes whenever I first load Hotmail with an AppHangB1

Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 1.9.2.4079
Application Timestamp: 4d6fb7c0
Hang Signature: 4d04
Hang Type: 0
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 3081
Additional Hang Signature 1: 4d042959a591a3106b2ce9a639b2699b
Additional Hang Signature 2: 351a
Additional Hang Signature 3: 351a32908df45f91de45b425bbe59808
Additional Hang Signature 4: 4d04
Additional Hang Signature 5: 4d042959a591a3106b2ce9a639b2699b
Additional Hang Signature 6: 351a
Additional Hang Signature 7: 351a32908df45f91de45b425bbe59808

Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!

Similar Messages

My Firefox freezes whenever I try to search with Google. I am still able to close the browser, though. How can I fix this?

Whenever I attempt to utilize Google to search anything on the internet, Firefox will freeze. However, I am still able to close the browser window and end the firefox.exe process in order to open a new browser window, but it is annoying an inconvenient to have to do this frequently. Help!

Might be because of a malware.
Run this-
Malwarebytes - http://www.malwarebytes.org/mbam.php

First loading prolem.

Dear all,
I used Liferay framework, Adobe Flex 3 Chart, extjs , Java
technology to build a site and to embed .swf file (version 10.0.12
) into
jsp page, I used SWFObject 2.1
My homepage have two small chart (coded in the same way)
.When I open homepage with IE7, everything is OK but with FireFox 3
, I meet a problem .
- With first chart , placed in center of home page, I just
see two axis and gridlines instead of lines . I change tab to
reload data and I can see lines as requirement.
Problem in the first loading .
- With second chart, placed in the footer . When I scroll
down , it's begin drawing and show lines normally .
There's a pleasant . I
swaped the place of two chart and now I met same problem
with second chart . It mean : the problem will occur to chart is
put in the
area that user can see . Chart that user have to
scroll down to view can be load normally.
Can you tell me what happen with my charts or give me a guide
to solve my problem.
Thanks for reading.
SunTran.
Embeded codes:

hi,
1) why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
Ans - In real time scenarios y may have to load data from various source system (liks sap,non sap,flat file).also more than on r3 source system is also possible. hence to have consolidation of the master data based on source system we load master data to ods first. but is not always. one few master datas like - Batch number,delivery number,invoice number. u can also load directly to master data tables using direct update.
2) Is every master data from source systems first loaded into ODS before it is stored in individual Master Data tables?
not mandatory, it depends on requirement.
Ramesh

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

Change First Load and Menu Disappear with scroll

Hello,
Im in a crossroad trouble and think that one of my problems is that i can resolve it changying the first load of my site and relink to one anchor link.
My other problem is that i want to recreate the behavior of the menu of this web http://www.smallstudio.com.au/ with no success, this disappear when scrolls the site.
Thanks for anticipate, im thinking that maybe can modify the html or do with Edge Animate, but maybe someone can help me because im walking in circles with this site.
Gracias!

Thank you, knorretje. Had no problems with logging on 2003. Lot of lines, but I propose that critical part 
0[220f140]: nsHttpChannel::OnCacheEntryAvailable [this=3f6f400 entry=5236740 access=3 status=0] 
0[220f140]: nsHttpChannel::Connect [this=3f6f400] 
0[220f140]: nsHTTPChannel::CheckCache enter [this=3f6f400 entry=5236740 access=3] 
0[220f140]: nsHttpResponseHead::Parse [this=6b113c0] 
0[220f140]: nsHttpResponseHead::ParseVersion [version=HTTP/1.1 200 OK] 
0[220f140]: Have status line [version=11 status=200 statusText=OK] 
0[220f140]: ParseContentType [type=image/gif] 
0[220f140]: nsHttpResponseHead::MustValidate ?? 
0[220f140]: no mandatory validation requirement 
0[220f140]: Not validating based on expiration time 
0[220f140]: nsHTTPChannel::CheckCache exit [this=3f6f400 doValidation=1] 
As I understand, all partial checks say that cache is good. But ending doValidation=1, probably, means that request will be sent. Do not see any reason.

First load with DTP with mode Delta

Hello Experts,
I'd like some suggestions based on the following scenario.
DSO-A
- total records = 44,000,000
- with criteria X = 230,000
DSO-B (New DSO)
- due to this DSO is a new object. It is required to retrieve data from DSO-A with criteria X
- this means that the target records to be added are 230,000 records
- DTP for extracting data from DSO-A to DSO-B --> use Extraction Mode = Delta
Questions
- For the first time loading, how to extract data in small chunks at a time from DSO-A to DSO-B when Extraction Mode is set to Delta?
I have concerns on performance if data were loaded all at once with Extraction Mode = Delta. I do not want to interrupt other existing schedule jobs much.
After the first load, this DTP will be set to be run daily. The next day, data will not be loaded in huge amount again.
Any best practice on this.
All suggestions would be appreciated.
Thank you very much.
-WJ-

*- For the first time loading, how to extract data in small chunks at a time from DSO-A to DSO-B when Extraction Mode is set to Delta?*
When you are loading first time from DSO-A to DSO-B using DTP it acts like Full load only, even if you keep that as Delta mode, then for further loads it takes as Delta load. If you have any selections active for that we can load small chunks using the Filters option in the DTP in the Tab Extracion.
I have concerns on performance if data were loaded all at once with Extraction Mode = Delta. I do not want to interrupt other existing schedule jobs much.
You have just 230,000 records to be loaded, i dont think it gives any performance issues. We can load it.
After the first load, this DTP will be set to be run daily. The next day, data will not be loaded in huge amount again.
Yes for further loads from this DTP gets only delta records hope they are fewer.
Hope this helps.
Veerendra.

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

I have a MacBookPro1,1 running mac os x 10.6.8. It keeps freezing whenever i use it, and often takes 5 or more attempts to turn on. It just stays at the grey apple screen, causing me to force shut down. Is there anyway i can fix this?

When i am using the mac. often it will suddenly freeze, only the coloured loading wheel still moving. I will leave it for hours to unfreeze but nothing. The only remedy is to turn it off by the button. Moreover, sometimes when i turn it on it gets stuck at the grey apple screen and i have to turn it off by the button and on again. This can happen up to 10 times until it turns on! What can i do?

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you are able to reach your desktop take note of how large your hard drive is and how much hard drive space do you have left?
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

My phone continues to freeze..i down loaded picture maker used it for about 30 min then phone startted to freeze can restart and does the same thing

my phone is frozen..I had down loaded picture maker and used it for a little while..phone started freezing...will restart but freeze again..first smart phone not really good with it yet..trying to uninstall things but keeps freezing

tene,
I am sorry to hear that you are having trouble with your device. We want to make sure that you always have a good experience with a new device. What model phone do you have? Have you tried removing the recently downloaded app. Please fill us in and I am sure we can get this fixed right away.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Windows 8 hangs or freezes whenever search for anything

Rebuild the Index
Whenever you try to search for something in windows, its indexing which find the things quickly and brings that to you.If indexing is disabled or corrupt computer won't be able to search and will not present the search results.Windows uses the index to perform very fast searches on your computer.
The index requires almost no maintenance. However, if the index can't find a file that you know exists in an indexed location, you might need to rebuild the index. Rebuilding the index can take several hours, and searches might be incomplete until the index is fully rebuilt.
Go to Control panel and open Indexing Options.
Click the Advanced button at the bottom of the Indexing Options window. This displays a new window titled Advanced Options.
Click the Index Settings tab if it isn’t selected already.
Click the Rebuild button to delete and rebuild the file index.
Click OK to confirm.
For more information on Advance indexing option you can read article on microsoft's website http://windows.microsoft.com/en-in/windows7/change-advanced-indexing-options
Step 2 will always fix this issue but just in case its not helpful try the next Step 3.
3.Check the Registry Value
Manual Fix 1
1. Press Windows Key + R to get the run dialogue box.
2. Type "regedit.exe" in the box and hit enter.
3. Using the box on the left, navigate to the following directory:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
4. We need to change a registry called "Start_SearchFiles" to a value of 2. If you are like me, yours is already 2. We need to reset this so what we are going to do it change it to 0, then back to 2.
5. Double-click Start_SearchFiles or right-click and select "Modify" to get the edit box. Change the number under "Value data" to 0 then click "Ok".
6. Repeat step 5, changing the value back to 2.
7. Restart your computer.
Manual Fix 2
Using the above information navigate to the following directory: Read More on http://bookingtohosting.blogspot.com/2015/04/windows-8-hangs-or-freezes-whenever.html

Hi,
Regarding current information we can't say that it related to this exe file.
We need to use Clean boot mode and Safe mode to test the results:
Please first restart the Windows in Clean boot and see if the issue still persists after reboot:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
If the issue still persists in Clean boot mode, please test in Safe mode.
Let me know the results in Safe mode.
If we cannot identify this issue in Clean boot and safe mode, please help to collect the boot trace and let's see what cause this issue:
Windows Performance Toolkit: Simple Boot Logging
http://www.autoitconsulting.com/site/performance/windows-performance-toolkit-simple-boot-logging/
You can upload the etl file from this tool for our research.
Kate Li
TechNet Community Support

Load testing with concurrent users on HTTP Web

Hello,
I am trying to do load testing my PHP Web Application.
I record (with Firefox) and developed the testing script with OpenScript,
but I found that I could only test with "Iteration" feature.
Is there any way to do load testing with concurrent users ( multi users login at the same time ) which defined in databank?
Thanks for help.

Hi
You need to load the script into OLT (Oracle Load Testing) you can download it from here you need the first link Oracle Application Testing Suite and run the OATSxxx.exe to install OLT.
Regards
Alex

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

ITunes freezes for minutes at a time with iPad

This is making me crazy! I sync my iPhone('s) and iPods with this computer, and while iTunes may slow down for a few seconds while the iPhone or iPod mounts, it is responsive almost immediately. Update! Now my iPhone freezes iTunes too... this blows!
With the iPad however, iTunes freezes for up to 2 minute with the spinning beach ball and shows up as unresponsive (duh!) in activity monitor. It finally starts synching and while doing so occasionally becomes unresponsive, but the synching finally finishes succesfully... eventually. I have removed and reinstalled iTunes 9.1 according to apple support protocols, but no real change. I have bit rate convert enabled, but it happens regardless of whether or not music is being added or changed. Have repaired permissions, disconnected various other USB devices, but no help so far... Anybody?
Message was edited by: acousticart
Message was edited by: acousticart

Your MyWebSearch plug-in is the cause of many problems. Google for information and advice on how to get rid of it.
If that doesn't help, you should work your way through this(Safe Mode,Problematic extensions etc ) -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Make sure your plug-ins such as Flash are up-to-date -
http://www.mozilla.com/en-US/plugincheck/
Try disabling third party toolbars.
Report back.

Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader

I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanks

Hi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com

I cannot use Microsoft Hotmail with Firefox 3.6.24 and Windows 7. I click on an email but nothing happens. I did not have this problem with Windows Vista. Any solutions would be greatly appreciated.

The Windows 7 is on a new Dell Inspiron desktop. The Windows Vista is on a Dell Studio laptop that I have had for a while. The Hotmail also works fine on the new computer when I use IE9.

Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.2 r152
# Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
*http://www.mozilla.com/plugincheck/
Update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the Java plugin to the latest version.
*https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Mozilla freezes whenever I first load Hotmail with an AppHangB1

Similar Messages

Maybe you are looking for