Mozilla is giving me double messages, 2 for each one I receive. I also have deleted a bunch, which have reappeared. Help!
Each message in my in box has been duplicated for [email protected] I have 2 other accounts, but they are not duplicated. I've deleted several, but they keep popping up. Hellp!
Duplicates of mail in pop situations have two common causes.
One is duplicates of the same mail. This is almost always caused by an anti virus program and can usually be cured simply by disabling the anti virus program from scanning mail, even if only to allow the current mail to download.
Two the connection to the POP server is lost before the final communication that allows the server and Thunderbird to agreed on what the last message downloaded was. This is also most often caused by anti virus chopping the connection a tad quickly because well we have the mail. Other common causes are a dropped connection to WiFi, someone tripping over the cord or any of a thousand and one accidents.
anyone using pop mail will see duplicates of messages occasionally, and unless you on expensive metered bandwidth, is not really anything more than an inconvenience. At least that is the case if you have the remove duplicates add-on installed to cleanup. https://addons.mozilla.org/en-US/thunderbird/addon/remove-duplicate-messages/?src=ss
see http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html for installation instructions
Similar Messages
-
How to acquire from various AI channels simultaneously with a different range for each one?
How to acquire from various AI channels simultaneously with a different range for each one?
In LabView I have found some examples but in C there isn't seem to be any.
Solved!
Go to Solution.Or you can add channels one by one with individual instructions: the follwing code compile and runs with no errors on a vitual daq device:
err = DAQmxCreateTask ("", &taskH);
err = DAQmxCreateAIVoltageChan (taskH, "Dev1/ai0", "AI0", DAQmx_Val_Cfg_Default, -5.0, 5.0, DAQmx_Val_Volts, "");
err = DAQmxCreateAIVoltageChan (taskH, "Dev1/ai1", "AI1", DAQmx_Val_Cfg_Default, -10.0, 10.0, DAQmx_Val_Volts, "");
DAQmxStartTask (taskH);
err = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, &read, 0);
DAQmxClearTask (taskH);
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Admin/Index2.aspx"
Any ideas???From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?
Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.
-
we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?
Do you know what happens if you delete the icloud account from an iphone 4s? Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone? I want to associate a different icloud account to the phone.
-
My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?
Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB -
New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code . If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.
New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code . If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.
-
If I own more than one Mac, do I have to purchase lion for each one?
If I own more than one Mac, do I have to purchase lion for each one?
No... u can click on your purchases holding down the option key and it will allow you to download lion again
copy this from your applications folder to your other mac's application folder and just click install
that's what i did.
i also made a usb key of lion following these instructions...
using Lion DiskMaker
http://osxdaily.com/2011/08/02/easy-way-to-make-lion-install-disk/
< Edited by Host > -
can i sync my mac pro with my mac book? i mainly want to do this for iTunes and iPhoto? I also have an iPad and an iPhone.
Do you have a local network setup either wired or wireless? If so, then have both computers connected to the network. Enable File Sharing on both computers in Sharing preferences. Select the startup drive on each computer. Press COMMAND-I to open the Get Info window and check the box labeled, Shared Folder.
You can now keep both computers in sync by using a third-party backup/sync utility that will work with a network setup such as:
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. -
I had my iphone5s in my shorts and my shorts went in the salt water at the beach and was wondering how to fix it or how much is it for another one. Im only 13 and we all make mistakes so please help 18 jan
Sorry, iPhones exposed to Salt Water, are pretty much destroyed. Salt Water is one of the most corrosive elements there is.
Make an appointment at any Apple store & they will do an out of warranty exchange for US $269. -
I own two apple devices iPad & iPhone why don't I get five gigs of backup for each one on iCloud?
No need to guess - that's why. 5GB per account, upgradeable at a cost.
-
Executing a message mapping for each instance of a sub-message
Hi,
I have a message struct like the following.
MT_TEST (1..1)
|----
>IDOC (1..Unbounded)
There is a field in each instance of Idoc, depending on its value, I need to perform receiver determination.
The target for each IDOC instance will be different for each value of the field.
How do I write a XPath expression to achieve this?
Also, is there any other method of achieving the same goal?
Cheers,
EarlenceHmmm.. so idoc is at source side..... Ok so multiple idocs are coming in one bundle BUT you cannot just divide the payload based on some conditions in Receiver Determination.
In your mapping you can map the source date to different targets but that is different thing.
Note: You can either send the whole payload to one receiver or nothing. You cannot send a part of the payload to 2 different receivers.
So it means it doesn't seems to be possible.
Regards,
Sarvesh -
Message Monitoring for each within the BPM process
I have a question concerning message monitoring within a BPM process. I receive an IDOC into my BPM process. I then have three transformation steps before sending an E-mail to the end receiver. When I look at the messages in the workflow log, I am unable to see the message after each transformation step. In the log display if I click the instance ID for all steps except the first step I am unable to see a message.
List of Message Objects
Object Type Instance ID Creation Time
ZXI_PROXY...0001 DC9F66530C7899F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C789FF1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78A5F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78B1F1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F66530C78ABF1AC430017A44943B2 11:04:39
ZXI_PROXY...0001 DC9F614BA98C51F1AC430017A44943B2 10:28:40
If I click all except the first instance I receive the following message:
No messages available for selection
Message no. XMS_ADM113
Is there a way to make the message persistent after each step within the process? I would like to see the data after each step in the workflow log. Is this possible?
I do receive the e-mail from the send step so I know that it's completing the process. What I'm not sure of is if each step individually processed the data as I expected.Hi Audra,
Check this link
BPM monitoring
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Sachin -
Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT
Maybe you are looking for
-
Clear DownPayment with DP request if DP is paid from Cash Journal
Dear all, Normally, we create downpayment request in F-37. After that, post down payment which refer to request in F-29, and DP request is automatically cleared. But If customer pay downpayment by cash, how to clear DP request ? Thank you, Kindly reg
-
'This file type is not allowed...' error on uploading CX Archive file
On uploading modified jar file to the exisiting CX archive path, it says 'This file type is not allowed. Please choose another file.'. This issue occurs only in the TEST environment while the error is not thrown in DEV. Any idea why this might be? Tr
-
I am purchasing a new OS 10.5. Will I be notified when upgrades are available and be able to down load them? Will 10.5 serve as a platform for Snow Leopard so that I am able to purchase Snow Leopard and install it? I have read that installation of
-
Is it possible to shuffle photos in an iPhoto slideshow project? I created a temporary slideshow with this feature, but need to export it to iDVD. I have photos spanning decades and want them to appear randomly without me having to rearrange them all
-
Hello, I have a white error screen stating JVM ERROR 545. I have tried backing up my date and this has not worked. Out of desperation, and not wanting to delete my documents, i tried to re-install the firewarm on the phone. This also did not work. Do