MP Navigator 3.0 scanner isn't working with Canon mp510 printer

Hello,
I'm using a Canon mp510 printer/scanner, using the MP Navigator software 3.0 and whenever I click on the scanner, the program shuts down completely. I have already tried to uninstall, reinstall, search for updates (and 3.0 is the latest one I have found), etc...and nothing is fixing the problem. I just recently updated to Snow Leopard and only started having the problems at that time. I know the problem is not the printer, as the computer recognizes it when I used Image Capture, but I would prefer to stick to MP Navigator and am frustrated nothing is working. Any help or suggestions?!?!

Canon Australia has [MP Navigator v3.04|http://support-au.canon.com.au/contents/AU/EN/0900172801.html]. If you don't already have this version (assuming your 3.0 could be 3.04) then install this latest one.
To use MP Navigator you also need to have the [Canon MP510 Scanner Driver v12.13.12|http://support-au.canon.com.au/contents/AU/EN/0900218401.html]
Note that Image Capture uses a different scanner driver that is included with Snow Leopard.

Similar Messages

Can't get my iphone4 AirPrint to work with Canon mx712 printer

Can't get my iphone4 AirPrint to work with canon mx712 printer
I've reviewed all network, printer, phone settings

airprint basic http://support.apple.com/kb/ht4356 see if that printer is compatible.
airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
TLDR;
This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved.

FaceTime camera isn't working with yosemite 10.10

Today i update My MacBook Pro 13'' (2013) ! FaceTime camera isn't working with yosemite 10.10 !
Anyone Can help me?PLEASE!!!!!!
When i log in , it get me a message ,FaceTime Want use my Key , and than SHOW me Want use my Key( ***** ) Yes or No ?
no matter i Choice any answer , THE FaceTime WII all log on.......,and Show me other message , Please Call Apple , And give me a service code : ******.
<edited by host>

Just got this problem fixed.
This is what customer support instructed me to do for my iMac:
Rest 1.
Shut down computer and unplug power; wait 15 secs.
Turn on computer.
Shut down computer.
Reset 2.
Turn on computer.
Before gray screen comes up, so almost immediately, press Option-Command-P-R at the same time.
Hold down until you hear the turn-on noise, let go and let the system start up.
This fixed my camera problem.

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

My serial number isn't working with the new Photoshop on a different computer. Any ideas?

You don't need a serial number for the latest version of Photoshop, just sign in with your Adobe ID

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

I upgraded my iphone to ios 6 but now it isn't working with itunes

I upgraded my iphone to ios 6 but now it isn't working with itunes and my itunes will not upgrade. It is stuck at 10.6.1 and my macbook is not compatible with 10.7

A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

PG-810 isn't compatible with canon Pixma mp280

My mp280 came with a ink PG-810 but the canon site say that PG-810 isn't compatible with canon Pixma mp280
it all I just want to know that can we replace the ink with a pg 810
the canon site says it is compatible with pg210 but that isn't available in my area so can I buy and use pg 810 in my printer ?
ps the printer came with pg 810 cartridges
THANKS

Hi prabhy!
If your PIXMA MP280 was purchased or manufactured for use outside of the US, then you will need to contact support for the country where it was purchased or manufactured to be used to determine what ink tanks will work in your model. We know that printers purchased in the US may not work with inks purchased from other countries.
To contact support for another country, go to www.canon.com and select the region or country you need.
We hope this helps!

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

What version of Elements will work with Canon Print Studio Pro

What version of Elements will work with Canon Print Studio Pro?

I tried this step but it did not work. I have a Mac YosemiteOS 10.10.1. I copied to plug in files from Canon Print Studio Pro. Open canon utilities, open print studio pro, open CS4 folder and copied files CNPSPP101.plugin and CNPSPP102.plugin (not there is also a folder called CS5 but it has the fame plugin files)
I copy these files and then go to Photoshop Elements 13 and paste these files in Support File folder in Plug - ins and also did in folder Optional Plug-ins.
I then open Photoshop Elements 13 and hit Automation tools but Canon Pro Studio option is not there.
Can you provide more details on where I might be going wrong.
I put in a trial version of Elements 12 and have no problem. I just can't find where to purchase Elements 12 so I do not lose it in 30 days. Know where I can purchase?

Need a USB hub to work with a multifunction printer

Can anyone recommend a reliable USB hub that can work with the HP Officejet J4580 Multifunction (fax) Printer? I bought a Belkin 7-port hub for my G4 FW800 laptop (OS 10.3.9) and it works with an older dedicated printer and a 2-year-old multifunction printer (no fax), but I just got a new Belkin 7-port to go with the same laptop and it won't work with the new multifunction, so I'll have to return it.
Any suggestions for a 2+ port hub that's reliable and would work with this new printer? AC- or laptop powered doesn't matter, though I'd prefer to have the AC option. Amazon's web page on this says it will work with all 1.0 and 2.0 USB devices, but obviously that's wrong, and I like not to make the same mistake twice. Thanks!

I'd have to agree with motsteve too.
Stay away from unpowered hubs, they are nothing but trouble or should I be more diplomatic and say that they do work for some devices but not all and some unexplained behaviour has been known to happen with them.
The same can be said of bus-powered hard drives.
Are you sure it is not a driver problem ?
Are you sure this MFP is compatible with the OS you are using ? Have you checked the system requirements first ?
I think the USB hub you have is probably fine.
If it is USB2.0 compliant and is mains powered then there is something else at work here.
1) Check the cables - try another if you have one.
2) Unplug the printer , turn the computer and hub off.
3) Reconnect everything and then turn on first the printer , then the hub , lastly the computer.
4) If 3) fails ,do the same again but in a different order.
I have had problems with peripherals not showing on the desktop or getting a " Can't connect to device XXXX " so I have turned everything off, unplugged them all, then reconnected and turned everything back on.
Once that peripheral is mounted once I generally find that I don't have a problem with it again.
I think it may lie in the order that the OS extensions load or something along those lines.
Stewie
Message was edited by: stewiesno1

MP Navigator 3.0 scanner isn't working with Canon mp510 printer

Similar Messages

Maybe you are looking for