MP Navigator wont activate scanner on my MP270 printer.

Hello.  I hope someone can help.
I am using the MP270 printer on my MacBook; OS X v 10.6.8.
I can print documents so I know my USB connection is OK.
When I press the scan button an error box appears saying that my computer cannot start MP Navigator EX. When I click on MP Navigator EX program within the Canon Utilities folder, the same error message appears.
The MP Navigator EX is the 3.0 version.  I can see this is an old version so I have uploaded the 3.5 version and followed the installation process.  It says it has successfully installs.  But it is no where to be seen and when I search for it the 3.0 version is the only version.  Even when I delete it, and then follow the 3.5 version installation process, the 3.0 re-appeared within the Canon Utilities folder.
What am I doing wrong here people?
James

Canon Australia has [MP Navigator v3.04|http://support-au.canon.com.au/contents/AU/EN/0900172801.html]. If you don't already have this version (assuming your 3.0 could be 3.04) then install this latest one.
To use MP Navigator you also need to have the [Canon MP510 Scanner Driver v12.13.12|http://support-au.canon.com.au/contents/AU/EN/0900218401.html]
Note that Image Capture uses a different scanner driver that is included with Snow Leopard.

Similar Messages

  • Iphone suddenly says it needs to be restored, so i attempted to restore but now it says it wont activate?

    Hi guys,
    this morning  my Iphone 4 came up with a message on the screen saying it needed to be restored, i thought it was strange so i rebooted my phone.
    Then it just went to the 'connect to itunes' screen like it was a new phone.
    I attempted to restore and failed a couple times, finally it seems to have worked but wont activate?
    any ideas would be great!
    Justin

    VOR LOCK wrote:
    I paid somebody to get it factory unlocked ,It was working fine for quiet some time but suddenly  since last week message appeared phone needs to be restored ,i put it on itune and it restored but after few hours it went back on the same state,I did it few times on each attempt,It got restored but exactly after 40 to 50 minutes again pop up with the message NEEDS RESTORATION, please need some help.
    Then the device has been hacked.
    Restore as new, this will remove the hack that unlocked the device.

  • I updated my 4s to ios7, and had to restore it (stupidly forgot my passcode and disabled it), and now it wont activate, for 2 days... I can't activate it through iTunes because the sim card is locked. What do I do?

    I need help reactivating my 4s!
    I updated the software to ios7, couldn't remember my passcode (never used it before, and ios7 turned it on) and ended up disabling my phone. Erased it remotely via Find my iPhone, and now that I'm trying to restore it, it wont activate. It's been this way for 2 days now. I get the "activation server is unavailable" error. I realize Apple is struggling with their servers during this software update and launch of the new iPhone 5, but really, 2 days now?? 
    I am currently living abroad, and am using a sim card that must be unlocked. So when I plug it into iTunes, it will not activate because the sim card is locked.
    Help!! Is there anything I can do?

    Try disconnecting your iPhone temporarily and then reconnecting it after a while.

  • So i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over  wifi or when connected to itunes. how can i fix this?

    so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over  wifi or when connected to itunes. how can i fix this?

    You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
    iOS 7 Developer forum- Apple Developer
    Otherwise you are on your own since you have a bootleg copy
    PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

  • Bought a brand new Ipod touch 5th gen.  it wont activate...what do i do?

    Bought a brand new Ipod Touch 5th gen. it wont activate, what do I do?

    I'm having the exact same problem. I got a new one for my sons birthday yesterday and CANNOT activate it. Anyone know why?

  • Ipad 3 on ios 6.0.1 wont activate imessage, icloud and facetime. And i wont get notifications FROM ANY APP WHATSOEVER!!

    I recently updated my ipad 3 to ios 6.0.1 and there are a **** lot of problems. My imessage and facetime wont activate - it keeps saying couldnt sign in check ur net connection. And safari sometimes says it couldnt open the sight because it couldnt connect to the server. My net is going perfectly fine but ios isnt. And then i wont get push notifications for any app, no matter wat i do. Ive restored it twice, but nothings working watsoever. If anyone has any idea how i can sign in to imsg, facetime and icloud or get my notifications to come plzzz do tell me i cant find a solution anywhere!!!!!!!!
    And apple u really need to fix these problems in the next update!!!!
    Thank u.

    hi there,
    i think i know whats wrong. one thing you could do is: try holding the home butoon and the power button together and shut down the ipad. you have to press both of them together!!! then to switch it back on, do the same thing again. it should start up. if it still doesnt work, you could try going to setttings, then "notifications" and turn on notifications for the apps you want. About safari, if it doesnt work from step 1, you could go to wifi or cellular and just reconnect your ipad to the internet.

  • I NEED HELP!! my iphone 5s wont activate after updating to ios 8 . what is wrong?

    hello! I updated to ios 8 two days ago and it was ok. I started using my iphone later that day and it just rebooted . Now it wont activate .

    look... I start my iphone and and it goes to main LOCK screen where a message is shown, the message is "activation needed" . After I slide to unlock  and write my security code it goes directly to the activation page , not to the very begging ,where you should select the lenguage but from the part where you have to chose a wifi connection . I connect to wifi and the activation process starts . On the screen is a message that tells me to wait a couple of minutes . After a couple of minutes there is another message shown on the screen where it tells me that the activation server is unreachable for the moment , please try again later . and this procedure can be repeated    a hundred times and the same message will appear . It wont eaven reset . Any ideas wat is rong with it

  • I restored my sons Iphone 3gs and now it wont activate keeps saying there is no sim in

    Hi can anyone help - i passed on my old iphone 3gs to my son,who had it unlocked in a shop so couldnt update software i asked Tesco to unlock properly they sent two emails saying they had conteacted apple it was not unlocked so plkug it in to itunes and it would say unlocked - it didnt unlock so I asked in the apple store who said to try to restore it which i did but now thw phone wont activate -it sats no sim and even though i went and got a new tesco sim it is stillsaying no sim and wont activate
    all help appreciated

    Was this officially unlocked legally by the phone carrier that the phone was locked to?
    If not it sounds like the phone was hacked to unlocked and when you updated the phone it locked backed up again.

  • My mac mini wont activate screen saver anymore after the os x latest updated. how do i fix this?

    ever since the new update after ios6 came out, the screensaver wont activate after 5min like it used to. any reason why? can this be fixed?

    Couple of things it might br...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.preference.desktopscreeneffect .plist
    /Users/YourUserName/Library/Preferences/com.apple.preference.desktopscreeneffect .plist.lockfile
    /Users/YourUserName/Library/Preferences/com.apple.screensaver.plist.lockfile
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    Have you done a PRAM reset, CMD+Option+p+r...
    http://docs.info.apple.com/article.html?artnum=2238
    Take the time todo 3 in a row.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Tried to update to ios7, phone was restored and now wont activate?

    tried to update to ios7, phone was restored and now wont activate?

    You have run into Activation Lock, a security feature of iOS 7 designed to prevent activation of lost and stolen iPads. there is no way around Activation Lock. You need to know the Apple ID and password used to set up the iPad originally.
    What do you mean when you say the original Apple ID is disabled?

  • Adobe Creative Suite wont activate

    My Adobe Creative Suite CS5 wont activate as it says it is activated on 2 other computers... The computer I'm trying to install it onto now is the only one it should be on... it was installed on it a few times before and I had to reinstall as I was hit with a virus... any way I can install it?

    Hi,
    Did you have the suite installed on a different computer previously?
    Adobe is identifying that the software is installed on 2 different computers already and hence the message.
    You can use this link to deactivate your software on any other computer it has been installed on :
    Deactivate your Software
    In case you don't have it installed on any other computer or don't have access to the computers' its been installed on, please contact the Support team to have this fixed. Use the below link to contact support:
    Contact Adobe Support.
    After clicking on the link, click on "I need help activating or deactivating my software".
    You will have the option to chat with a support agent and will also have a list of phone numbers to the right.
    Do let us know if you have any questions.
    Thanks

  • Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

    Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

    You can NOT unlock it. Only the carrier it is locked to can legally authorize unlocking it and the Japanese carriers will not do so.
    In order to be using it previously with a non Japanese carrier, the phone had to be hacked to illegally unlock it.  You can not get help here.
    Buy a new phone you can use.

  • My imessage wont activate and work, and i dont receive messages from people useing imessage? how do i get imessage to work?

    My imessage wont activate and work, and i dont receive messages from people useing imessage? how do i get imessage to work?

    I recently moved back to Australia for school from Canada and signed up for the new iphone 6 plus. After using icloud to save and backup from my previous iphone 4s, all of the apps eventually worked....except for whatsapp. After looking through my phone and numerous chat forums, it appears that my imessage and facetime are stuck in, "waiting for activation".....is anyone else having problems with this?
    I am curious as I am unable to receive the whatsapp code to re-activate my application. This brings me to my second question, is this an iphone/apple problem or a whatsapp third party problem?
    I've had friends send imessages to me and they appear to coming through. I have already rebooted and restarted my phone numerous time. A strong connection to wifi and data stream have all come in loud and clear.
    I have tried all of the directions that were posted and still have no whatsapp and imessage still inconsistent.
    Thank you

  • My IPhone 4 wont activate and I dont want to buy a simcard to activate it

    My iphone 4 wont activate and it worked fine without a simcard before i factory reset it.... And I REALLY dont want to pay 20$ to call customer support... this is my last resort I'm afraid...
    the error message "We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."

    I could have searched the forum for that answer but can speak from experience.  I retired my old 3GS and wiped it, bought a ip5 and ported my number to a new carrier.  Part of the wiping of the old phone restored it as new.  When I connected it to itunes the setup assistant would only pop up if I put an old sim car in it and then I could activate it

  • While using my pad it suddenly stopped and stated that I neede to activate it. Now it wont activate even though it had already been activated. What do I do?

    while using my pad it suddenly stopped and stated that I neede to activate it. Now it wont activate even though it had already been activated. What do I do?

    Everytime I try to do an activation it later tells me that it could not activate because the activation server is temporarily unavailable. I ready to throw it.

Maybe you are looking for

  • Nulls in Dates

    We are working with the beta release 3.0c of Forte and 2.0c of express. We have several DateTime domain fields for which we need to have nulls carried through and updated on the data base. Ideally when the user selects the insert button and the new r

  • Problem with importing 3-D images in to photoshop.

    I tried to open a '.kmz' 3-D file into photoshop to edit, however when I tried this, the following message appeared - Could not complete the New Layer from 3D File command because there is not enough memory (RAM). Now my iMac has 4gb RAM, which I thi

  • Service Endpoint Interface and RemoteException question on the server

    Hello, I would like to be able to log and track RemoteExceptions when the network goes down when an attempt to send a response back to the client. I understand that Weblogic will handle the RemoteException but especially on a network failure I would

  • Multiple materials input to planning board

    Hi, does anyone know if there is a way to specify multiple materials ( for instance thru copy/paste ) in the planning board MF52??? Any help appreciated ! danny

  • Object variable

    I am new to java. If I have a class Adder with two properties num1 & num2 so I do Adder A=new Adder(); A.setnum1(5); A.setnum2(3); Object obj=new Object(); obj=A; my question is how can I get the value of num1 and num2 from variable obj thanks in adv