MP3 and Memory Stick

I am trying to convert my Library music to MP3 and load it on a memory stick/flash drive to be able to carry it and play the music on MP3 devices. I believe I understand that I must make a new Play List. Go to preferences and change Import Settings to MD3 but I cannot figure how to download to a flash drive. This seems to be for burning a CD. I can be totally wrong with this process for I do not understand how to choose the songs I want from the present I Tunes Library. I would like to change my existing music Library to a new playlist in MP3 and save all on the stick.
Any assistance with the process would be appreciated.

Hey. It seems you got the import settings switched over to .MP3, so what you need to do now is right click on the songs you want to convert to MP3 and select the "Create MP3 Version" option. This will cause it to create a duplicate version on each song you select that is in MP3 format. (You can choose whether or not you want to delete the original .m4a file.) After you have converted the songs you want to mp3 format, you can just drag the song from within iTunes to a folder on the flash drive and it will copy the song to the new location.

Similar Messages

  • Converting itunes to mp3 for memory stick?..possible???

    is it possible to transfer tunes from itunes library to a format that is able to be transfered to a memory stick for playing on a device such as a psp??...thanks

    It depends what is in your iTunes library.
    -If it is mp3s, no problem.
    -If it is another unprotected format, use iTunes to convert it to mp3. To do this, make sure you have your import preference set to mp3. Then, right click the song and choose "Convert Selection to mp3."
    -If it is songs purchased from the iTunes music store, they are in protected AAC format and the only approach is to burn them to audio CD and import them back as mp3.
    Once you have what you want in mp3 format, Copy from the iTunes library, and Paste into the folder representing the memory stick.

  • Mp3 and Memory

    Hi
    i need to put in the movie about 5 mp3 files each is 4mintues
    (150kb size) and the files should be in seprated playes
    i mean after finishing the first mp3 flash should unload it
    from memory and start the next one
    so i added eachone to frame
    but when testing on mobile memory error
    i tryed to put mp3 in a separated scenes and same problem
    occured (Stream and event both make the problem)
    so how tell flash to load first mp3 play it then unload it
    and load the next one ???????

    put each mp3 inside its own SWF.
    make a player swf
    use loadMovie() to load the mp3 swf into a movie clip or
    level of player SWF
    when _currentframe = _totalframes (playhead finished playing
    mp3) call loadMovie to load the next mp3 swf.

  • Satellite Pro P100-327: memory card reader does not read Memory Stick Duo

    I just got a P100-327
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121991&toshib aShop=true)
    which, according to that page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)" but the pdf user manual that came with it says that it does not support Memory Stick Duo, Memory Stick Pro Duo or mini-SD.
    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter and the reader can't seem to read either of them (they should both count as Memory Stick Pro which should be readable right?)
    Should I be able to read my Memory Stick Pro cards? Why can't I since it says I should be able to? Do I need to install something first?

    Hi
    In my knowledge and according to the manual the Bridge Media slot supports Media of type
    - SD Memory Card
    - MultiMediaCard xD-Picture Card
    - Memory Stick
    - Memory Stick Pro
    Please note that the Memory Stick and Memory Stick Pro are not the same as Memory stick Duo and Memory Stick Pro Duo.
    Dont mix it.

  • Can I use a memory stick to back up my MacBook Air and what size do I need?

    i Have a MacBook air , processor 1.3 Ghz Intel core i5, 4GB 1600 MHz DDR3 memory. Operating on OS X Yosemite Version 10.10.1.
    it will not open up Safari, it crashed out of Safari with an error message and will not ooen it up now however many times I try.  I was reading Daily Mail on line at the time.  I can get onto the Internet by using Chrome but it feels as if Chrome is in charge of me rather than the other way round.  when I type in an address it just takes me where it wants to go rather than the website I want to to.  I now want to back up my data but left my drive in UK (I am in USA at the moment.) so wondered if I can back all my data (very important data) on to a memory stick so I can wipe my computer and start again.  I have an appointment with a techie at the Apple shop on Saturday but need to back up my data before the appointment, so not sure what to do.
    ALso my IPad is very unstable after using the Daily Mail site, it has always seemed to be fine before but this weekend seems to have created problems for both my MacBook Air and IPad Mini...

    You'd probably be better served to use a conventional external USB:
    http://eshop.macsales.com/shop/firewire/
    Easier to use, harder to lose and more dependable.
    http://www.tomshardware.com/answers/id-1772735/usb-flash-drives-reliable-externa l-hdds.html
    "generally speaking, a HDD (or SSD) is always going to be more reliable than a flash drive. USB flash drives are made to TRANSFER files, not to store them. Still, you get what you pay for, and I have had a few flash drives that have lasted a very long time"

  • Downloaded certain files from my old computer on a memory stick.Have inputted stick into my new mac and can open PDF files but not xlr,aww or eps files.Is there a solution to this please?

    Transferred certain files to my new Mac from my old computer via memory stick.Can open PDF files but not xlr,aww or wps ones.The important ones are in xlr format.Is there a solution please?

    My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
    I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh -  that won't cooperate. A lot worse, in Lion.

  • How do I import an iPhoto Library  (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

    How do I import an iPhoto Library  (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

    So what exactly did you copy over? If it's a 12 gig iPhoto Library then it sounds like the files are there. Perhaps the copy went wrong along the way.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Contacts and calendar from SIM card to memory stick

    Is is possible to transfer my contacts and calendar information from my 3G SIM card onto a memory stick that I can then put on my HD? This information only lives on my phone right now and all the troubleshooting tips are not working. I've been told I have to re-enter all my contact information manually before anything can be done about my not syncing problem. I am trying to avoid the manual labor.

    Unfortunately, I don't either. If you delete the MobileMe account from the iPhone, I believe you'll erase all of the contact info on the iPhone. If it's not in MobileMe either...well, that's not good!
    One possibility for the contacts data (but not the calendar data). Contacts are backed up when you sync the iPhone (not to your Address Book via sync with MobileMe active, but in the iPhone backup made by iTunes before a sync). There's 3rd party app, MobileSyncBroswer, which can export the contact info from the iPhone's backup file on your hard drive. You'd need to buy a license to actually export the contact data, the free version lets you see part of the contact info so you can make sure it's there.

  • I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

    i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

    Greetings,
    What happens when you drag it?
    Make sure the drive you are moving the files to has enough available space to receive the file:
    Click on the movie file and go to File >  Get Info and note the "size"
    Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
    Also note the format of the drive you are copying too.  If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
    Hope that helps.

  • I just put 8 gb of memory into my new mini, but the computer is only reading 4gb. It tells me that bank 0 has 4 gb and that bank 1 is empty. Which slot is "o" and which slot is "1" ? I re-wiggled the new memory sticks, but it still only reads one of them.

    I just added two new memory sticks to my new mac mini, each stick has 4 gb. The computer tells me that it now (with the new memory) only has 4 gb total, however. It says that bank "O" had 4 gb and bank "1" is empty. My two questions are... Which slot is bank o and which slot is bank 1? The computer didn't beep or anything, so I think its just that it doesn't recognize one card. I wiggled them again, in case maybe I didn't put them in tight or something, to no effect. Any suggestions on what I may not have done right???

    Same issue here. All chips, old and new working in bottom slot 0 but nothing working in slot 1 (top.)
    It also seems to be important to make the insertion at the right angle that was actually steeper than I thought at first. I also got a nice click when it slipped into place. You can also look at the position of the center slot/protrusion on the bottom chip to get an idea of how far the stick needs to be in.
    Another thread pointed out that you have to make sure that the retaining clips don't engage before you get it into place as they prevent further movement.

  • HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly :(

    HELP - I deleted an adobe file that I saved to a memory stick and I need it back really badly

    Try this Google search:
    http://www.google.cl/#hl=es&tbo=d&sclient=psy-ab&q=free+data+recovery+software+for+flash+d rives&oq=recovery+software+for+flash+drives&gs_l=hp.1.3.0i30j0i5i30l3.9708.24161.0.34539.3 4.26.0.8.8.0.378.7320.2-21j5.26.0...0.0...1c.1.lb0o4diaEEU&pbx=1&bav=on.2,or.r_gc.r_pw.r_q f.&bvm=bv.1355534169,d.eWU&fp=ff7a879957bf69ba&bpcl=40096503&biw=1112&bih=865
    It gave me plenty of hits, but be a little careful. I would suggest using the free trial of one of the paid products. As I have never used one, I cnnot recommand any.
    And remeber: every time you write something on that flash drive, you risk overwriting your lost file, thus decreasing your chances of recovering it.

  • How do I get a MS Word document on a Memory stick over to my IPad to edit and continue writing?

    I am looking to transfer my book that I am writing, with photos, from a USB memory stick written in Microsoft Word document format across to my IPad 3 to continue working on, editing it and adding more text and photos.
    Thanks for any help.
    Michael D

    You can't directly - the camera connection kit which has a USB connection only supports the copying of photos and videos to the Photos app. You will need to copy the document onto a computer and then, depending on what the app that you want to edit it in on the iPad supports, either copy it via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc

  • Can anyone help me copy and paste photos from iPhoto to memory stick

    can anyone help me to copy and paste photos from i photo to a memory stick...no the same as my pc and just can't figure it out  thanx

    Open up Finder and go to your flash drive. Now open up iPhoto and drag and drop the pictures you want into the flash drive folder.
    By the way, how is your PPC mac running Lion?

  • Files saved on memory stick on pc show as original file name followed by .XML and i cannot open why

    files saved on memory stick on pc show as original file name followed by .XML for example tester.doc.XML, is there any reason?  I cant open these on mac, if i put it back in PC is shows file as normal without .XML.  Confused.com any ideas.

    I have files on my work laptop (PC) e.g. document1.doc (word document), I then save it to my memory stick (which i have reformatted, I also tried my external disk drive) and then take that to my macbook, plug it in and in finder it then shows as document1.doc.XML, which i cannot open.  It happens to all types of files, it just seems to add .XML on the end of everything.

  • Transfer file from memory stick and add as Attachment to email

    How to transfer file from memory stick to email attachment? I would like to send the whole folder. Plz help. tks!

    I think  you should use the winzip freeversion to zip the folder and attach the same to mail and send them to yr receipents. 
    http://www.winzip.com/mac/en/product_overview_mac.htm
    regards

Maybe you are looking for

  • Get a query in htlm form

    I am creating a document where the content is extracted from a query created from the content of a MSSQL database. Each datarecord is the content of the document. The problem I am facing is that the data fields are returned as pure text records. When

  • Crystal Reports Runtime for specific language

    Hi, we're deploying our applications using VMWare ThinApps and packaging the CRforVS2010 SP1 Runtime is 400 Mb! I saw that many DLLs were 'duplicated' for each language so I was wondering if there were a lighter runtime for just english, or just fren

  • Has anybody had compatibility issues with Leopard and their scanners?

    I recently installed Leopard on my G5. I'm still using Photoshop CS2 and so far no problems. Until today. I have a Epson Perfection 2450 scanner and today I went to scan some old photos. At first blush, no problem. I put in a second photo. Nothing. I

  • Designer ES with LC Forms 7.2

    Will there be any compatibility issues if I use Desginer ES along with LC Forms 7.2 I would be saving the forms as Dynamic PDFs and render it using Forms LC. Thanks, Ninad

  • CS4 startup failure caused by MCmpgACodec.vca

    Premiere CS4 worked fine until a couple of months ago then it suddenly started to crash on startup. I recently found out that removing the latest MCmpgACodec.vca file in Premieres MediaIO/Codecs directory made Premiere launch again, but now it tries