MP3 as a data file stora

I bought an mp3 "Zen nano plus". Everything was great. Today i went to format a friend computer I had my Nano with me so I said "I will save your documents on my nano we'll save a CD" so I went into the Windows Explorer and I add his documents. When I finally finish my job. I tried to put back the data files on his computer but I couldn't. It says "Please insert a CD-Rom when I was double clicking onto the removal disk F. I went back at home to try it. Same think at home, I unplugged it and I turn power on. Creative apear ... Zen nano plus ... and it shut down!
What's the problem in the little book it say "You can also transfer data files using ..."
Thank you
PoolCleaner

I just had a thought that he may have packet writing software installed on the pc. I had trouble years ago with packet writing software. It was trying to take over the pc. After I uninstalled it the problems ended. For those who don't know, packet writing software is used to write to CDRW disks using drag and drop. It is often unreliable though and can be quite problematic. I suggest that people write to CDR and CDRW disks using mastering software such as Nero or Easy CD Creator, and to uninstall all packet writing software.

Similar Messages

How to store data file name in one of the columns of staging table

My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
Abhay

Pl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini

I have an iMac with 2 internal drives and set-up with multiple user accounts. How do I create a path to store data files on my second drive within an application?

I have an iMac with 2 internal drives and a multiple user account set-up. Hw do I create a path to store data files on the second drive within an application?

This is the Mac mini forum not the iMac forum however...
Applications written for average users like Photoshop, Word, i.e. GUI based applications provide a 'Save' dialog box which while allow selecting second drives or any drive. The dialob box initially shown might be in the simple mode but you just need to click on the triangle to show the full set of options. You should then see the different drive names amongst other options.
If your referring to an application your writing yourself then you need to build a pathname. This can be in one of two styles depending on the programming system your using. This could be a POSIX style path or a Mac style path.
POSIX = /Volumes/volname/foldername
Mac style = Volname:foldername:

Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
<Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
00000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:166)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
at weblogic.store.io.file.Heap.open(Heap.java:164)
... 9 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
... 10 more
i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

The root cause appears to be right in the stack trace:
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
I don't think that this message necessarily means there is a file corruption.
As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
Tom

Can SSD which is configured for intel rapid start be used to store data files as a normal drive

Can SSD which is configured for intel rapid start(No Smart Response) be used to store data files as a normal drive
Lenovo ideapad u310 with 24 GB SSD Partition , only 4GB has been configured as Hibernate partition for Intel rapid start, rest of the 18.36 GB has been labelled as Healthy(Primary partition).Can this 18.36 GB of SSD be configured to store data files on it without affecting Intel rapid start.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

How to store the sampling rate into the header of the data file?

I want to store the data parameters such as sampling rate to the data file. Now I am using the Write Labview Measurement File VI, the data is saved, but like the sampling rate this kind of parameter is not in the file. How can I store this parameter?

If you want the sampling rate to appear in a different location of the header, then it and it's subVIs can be modified to write anyway you want. Right click on the Express VI and slect Open Front Panel. Then you have a VI that can be modified. If you want to use an unmodified Write LabVIEW Measurement File, you could use that, read the whole file back in with one of the file read functions, insert a string with the sampling rate and then write the whole thing back out again. It might be simpler though, to use Write Characters to File to create your own header and then use Write to Spreadsheet File to write the data. There is also the function Export Waveforms to Spreadsheet File on the Waveform>Waveform File I/O. This uses a slightly different format than a .lvm file. It too can be modified if you don't like the default header.

How can i convert a data file to mp3 so it can be played ?

HOW CAN I CONVERT DATA FILE TO MP3

You cant change a file on a CD/DVD.
You need to import the contents to iTunes. You can choose the file format to save it as in iTunes Preferences.
From the menu bar (with iTunes open)
iTunes > Preferences > General - click the Import Settings button and change the choice to mp3 encoder.
(Note - that instruction is for iTunes 9.1.1 - if it's changed in 10.x, I trust Klaus or one of the others will correct me).
When you've set the import encoding, put your CD in and select import (button at bottom right in 9.1, may be in the menu bar for 10.x).

Retrive Japanese data and store into a file

Hi,
I have a table which contains japanese data. My database charset is AL32UTF8. I am able to insert japanse data into oracle table also I am able to view inserted data into oracle table using sql*plus.
I wrote a java program to write a file with table stored data. To fetch that data I am using sql query. When I use ojdbc14.jar of version 9.0.2.0.0. Then I am able to write japanse data file but when I use ojdbc14.jar of version 10.2.0.3.0. Then I found junked data into data file.
Please help me out to solve this problem.

The BIP Bursting APIs allow you to hook in code, in which you could achieve what you mention - but would require programming it!
Regards,
Gareth

How to Edit a XML data file from AS3 class...

Hi...
             I need to edit an XML data file I have at the exit of application.... I have a demo code which is not working....
This is the code :
public function UpdateData():void
               trace("Closing....");
               var FileData:XML=<Hello>Hai</Hello>
               var urlLdr:URLLoader = new URLLoader();
               var urlRqst:URLRequest = new URLRequest ("AppData.xml");
               urlRqst.data=FileData;
                urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
               urlLdr.load(urlRqst);
This AppData file already exist and has some data in it.
    Plus :
   How to find the application is exiting.

use: fscommand('Quit');
to exit your app.
and this is how you would use the urlloader class to save data:
public function UpdateData():void
         trace("Closing....");
          var FileData:XML=<Hello>Hai</Hello>
var urlVar:URLVariables=new URLVariables();
urlVar.fileData=FileData;
            var urlLdr:URLLoader = new URLLoader();
           var urlRqst:URLRequest = new URLRequest ("this must be an executable to parse and write data");
           urlRqst.data=urlVar;
           urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
              urlLdr.load(urlRqst);
but i don't think you can use an executable on a fl4 device so you will need to use a different class. i don' know how you're storing an xml file on a fl4 device but you should be able to use the sharedobject to read and store xml.

How to find name of report if I know name of instance and location of instance in Output File Store

Hello all,
can somebody help me to find name of the report if I know name of report instance and also location of instance in Output File Store. It should be done via Query Builder.
It is ...rpt file as output from Crystal Reports. I tried few commands in Query Builder but usually they finished with timeout error.
Could you help me and send specific command? Or way how to change timeout of Query Builder?
Thanks.
matus

Hello all,
We finally found solution.
We knew that file is located on path .../Output/a_145/009/002/133521/~ce10c.....9332.rtf
This file has more than 2 GB. We tried to find which report is related and provide necessary actions.
As I mentioned we still failed due to timeout error - There was an error retrieving data from the server: CMS operation timed out after 9 minutes.
So we tried to use our testing environment. We started there QueryBuilder and there we successfully tested that we found details about files from FileStore /like Name of the report in Launch Pad, CUID, ...
SELECT SI_NAME, SI_CUID, SI_FILES FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/a_148/020/000/5268/'
or
SELECT * FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/ a_148/020/000/5268/'
Best regards,
matus

My application doesn't open or create a .dat file after I made it an executable !

I made an application that stores some data in a .dat file. It works fine until I make the VI an executable.
Even if my program didn't find the .dat in first time, it should create, but it isn't !
What I have to do for my VI use the .dat file in executable mode. I need this because I have to run the VI without LABVIEW 8.6 installed.
Thanks !
PS. Sorry for my poor English !!! I'm Brazillian !!!
Solved!
Go to Solution.

Why Does My Executable Not Work When Using the Current VI's Path Constant?
(see also)
Message Edited by altenbach on 08-11-2009 07:38 AM
LabVIEW Champion . Do more with less code and in less time .

How do I move data files from old iPhone? Specifically, the password files for the App mSecure from my old iPhone 3Gs to iPhone 4S?

How do I move data files for mSecure (a password saver app) from old iPhone 3GS to new iPhone 4S?

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

How can I read/write data files (text file) from PL/SQL Script

I had an oracle forms pl/sql program to read/write a data file (text file). When this code is run on a command line as a PL/SQL script using the SQL*Plus I am getting an error:
-- sample.sql
DECLARE
vLocation                VARCHAR2(50) := 'r:\';
vFilename                VARCHAR2(100) := 'sample.dat';
vTio                   TEXT_IO.FILE_TYPE;
vLinebuf               VARCHAR2(2000);
vRownum               NUMBER        := 0;
-- use array to store data FROM each line of the text file
TYPE           array_type IS VARRAY(15) OF VARCHAR2(100);
vColumn      array_type := array_type('');
PROCEDURE prc_open_file(p_filename IN VARCHAR, p_access IN VARCHAR2) is
BEGIN
    vTio := TEXT_IO.FOPEN(vLocation||p_filename,p_access);
EXCEPTION
    WHEN OTHERS then
      -- raise_application_error(-20000,'Unable to open '||p_filename);
      message(sqlerrm);pause;
END;
PROCEDURE prc_close_file is
BEGIN
    IF TEXT_IO.IS_OPEN(vTio) then
       TEXT_IO.FCLOSE(vTio);
    END IF;
END;
BEGIN
--extend AND initialize the array to 4 columns
vColumn.EXTEND(4,1);
prc_open_file(vFilename,'r');
LOOP
      LTEXT_IO.GET_LINE(vTio,vLinebuf);
      vColumn(1) := SUBSTR(vLineBuf, 1, 3);
      vColumn(2) := SUBSTR(vLineBuf, 5, 8);
      vColumn(3) := SUBSTR(vLineBuf,10,14);
      Insert Into MySampleTable
      Values
        (vColumn(1), vColumn(2), vColumn(3));
      EXIT WHEN vLinebuf IS NULL;
   END LOOP;
   prc_close_file;
END;
SQL> @c:\myworkspace\sql\scripts\sample.sql;
PLS-00201: identifier 'TEXT_IO.FILE_TYPE' must be declaredIt works on the oracle forms but not on the SQL*Plus. Is there an alternative method using a PL/SQL script? A simple sample would help. Thanks.

Did you ever noticed the search box at the right side of the forum?
A quick search (limited to this years entries) brought up this thread for example
Re: UTL_FILE Examples

Windows Phone 8.1 Universal: VS 2013 deploys app to device but does not delete data file in roamingfolder and roaming is not activated.

I am using VS 2013 to develop a Windows Phone 8.1 Universal app. When I deploy to the device (my phone), the old data file that I had stored in the roamingfolder previously continues to be used. I have uninstalled the app after being deployed,
I put code in the app to delete the files individually from the roamingfolder and used ClearAsync(). That worked until I deployed the app again and then the old files came back. I have not associated these apps with the store yet so roaming should
not be working. The desktop app does not have this problem, when I uninstall it the files are deleted.
In the phone app properties debug tab, I have the Uninstall and the reinstall my package checked for all configurations. I have looked everywhere I can think of for these old files: laptop c:, phone tempfolder, localfolder, etc. thinking VS is reinstalling
them from somewhere when deploying the app but I cannot find them. If I change the phone app to use the localfolder, the old files are not used.
Is this just the way it is if I use the roamingfolder or is there a way to delete these old files?
Any help would be greatly appreciated. Thanks.

Hi MV12,
>>When I deploy to the device (my phone), the old data file that I had stored in the roamingfolder previously continues to be used
Yes, it is designed to work like that, please refer to this document for details:
#Accessing app data with the Windows Runtime (Windows Runtime apps)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh464917.aspx#roaming_app_data
Roaming data for an app is available in the cloud as long as it is accessed by the user from some device within the required time interval.
If the user does not run an app for longer than this time interval, its roaming data is removed from the cloud.
If a user uninstalls an app, its roaming data isn't automatically removed from the cloud, it's preserved. If the user reinstalls the app within the time interval, the roaming data is synchronized from the cloud. The current policy specifies
that this time interval is 30 days. Location is available via the roamingFolder property.
>>Is this just the way it is if I use the roamingfolder or is there a way to delete these old files?
No, you will have to wait.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

MP3 as a data file stora

Similar Messages

Maybe you are looking for