MP3+ drivers: need drivers for using mulitple uni

Im using some inexpenci've home audio production software and im attempting to integrate a second MP3+ usb soundcard into my setup.
I am under the impression that the drivers i have currently are not permitting me to use two MP3+ units simotaniously,
Can anyone comment on this , design drivers for me, direct me toward a third party designer, refute the my claim its the fault of the drivers provided me via this site?
Help.
using magix audio studio 7 deluxe.
clmns

Fred,
National Instruments offers a DDK for customers to develop NI-488 drivers for operating systems that we do not support directly. Refer to the following product data sheet on using the NI-488DDK. http://www.ni.com/pdf/products/us/4gpib664.pdf
Craig A
National Instruments Engineer

Similar Messages

  • Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
    But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
    https://discussions.apple.com/message/24358339#24358339
    If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
    https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

  • Bluetooth / Vista drivers for use with Curve 8310

    Can anyone please assist with information on where and how I can get working Bluetooth drivers for Vista for use with my Curve 8310?
    Thanks in advance
    Cheers
    Phil

    have you found them yet?  thanks

  • AAC vs. mp3: ripping in iTunes for use in iMovie

    I've read a bunch of posts tangentially related to this question, but couldn't find anything that nailed this one.
    [1] Can iMovie use AAC files?
    [2] Assuming it can, will ripping my CD collection with AAC encoding for use in iTunes (and on my iPod) give me access to all of those tunes for incorporation intoe iMovie presentations?
    From what I've read, AAC produces higher-quality audio with smaller files sizes (I realize this is a point of hot-debate!), so I'd prefer ripping with AAC. But if iMovie doesn't like AAC files, I'll stick with mp3
    Thanks!

    Hi Argelius:
    Look here first:
    http://docs.info.apple.com/article.html?artnum=300456
    Sue

  • Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?

    Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.

    Hi
    We are developing solutions in that area.
    If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
    then we can discuss about arriving at a solution.
    My mail-id is [email protected]
    Thanks and Regards,
    Bibs

  • Need support for using my bb classic

    I am not a technical person and need support for my bb classic I sign up for the support with rogers and they have no clue on the bb Are there any experts out there that can provide support I am wiling to pay In the ideal world I woud like someone in the toronto area

    Have you looked through the built-in Help app? It's pretty comprehensive. As an experienced user, I often find things in there I don't know.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I need instructions for using my HP Photosmart D5345

    I need instructions for operating my HP Photosmart D5345.  I lost them.

    Hi Tigger59,
    Here is a link to the online manuals for the HP Photosmart D5345:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&jumpid=reg_r1002_usen&lc=en&product=3...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Hard drive drivers for use with system repair disk

    I've been through the mill with my Satellite A665 S6085...it started its life with a bad CD/DVD drive in the really dark customer service days and spent more of the first two months of life in the shop waiting for the arrival of a new drive than it did in my hands.  Then the CD/DVD failed just at the end of the warranty period (and Toshiba replaced it a second time very quickly, and without charge!)
    Since then it has been working reasonably well, but within the last few weeks it has gotten really sluggish (it was taking about 20 minutes to completely power up), and last week refused to start at all (repeated start-up failures).  I created a system repair disk from another laptop we have, managed to get it to start up - but accompanied by an even more dramatic slow down.
    I  was unable to create an image of the system, but I did manage in safe mode to copy all but about 20 unimportant files (whew!.), and was working on doing what I could to get it spiffied up enough to create a system image.  Unfortunately, in the middle of running the disk checking routine it hung.  It ran for about 20 hours and got to stage 4 (16% done the 23rd file) and stopped all activity.  (Prior to that time the drive light had been flashing on and off periodically - but when I had watched it with no activity for over an hour I did a hard power down . . . I know, bad idea, but it really did seem to be at a complete standstill). 
    It started once in safe mode then froze, and has not started since then. 
    When I boot from the system repair disk, the operating system doesn't come up - and the instructions are to load the hard drive drivers and try again.  So the immediate question is where the heck do I find the drivers since I can't power up to determine the hard drive manufacturer (and the drivers available through the driver download portion of the Toshiba site don't seem to do the trick)?
    But I'd also welcome any hints as to how to get far enough along to at least get a system image before I give up and let the professionals handle things...

    Hi ! You should have created a system image a long time ago I'm tired of this thread. You seem to know all about this so why even ask for help here on the forum Good luck friend. I hope you solve your problem. I don't think I can help you an further
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture48.JPG ‏186 KB
    Capture49.JPG ‏186 KB
    Capture50.JPG ‏187 KB

  • BODS : Datastore options for SAP R/3 - need clarity for use

    Hi All.
    Another request to understand the datastore optiono n BOXI 3.1 BODS existing installation.
    We are trying to pull a new table from SAP R/3 into BODS and we find that ABAP program is not getting generated as expected. And terminates. When we tested a simple workflow.
    While creating a new datastore for SAP R/3 Source :
    When we look at the datastore we find the following options for R3 Source ;
    ABAP Execution option :
    Execute preloaded
    Generate and execute
    Under data transfer method we find ;
    Shared directory
    Direct download
    FTP
    Custom transfer
    Then we have working directory on sap server
    local directory
    generated ABAP Directory
    Am testing a simple workflow of pulling data from SAP R/3 in a dev machine.
    But am not understanding.
    which option of ABAP Execution, and data transfer , path would work in co-ordination.
    Because when i say direct download and say generate and execute it throws error.
    Can anyone help me with combinations of the options to choose for a R/3 source. And the implications thereof.
    I had created a folder under local bods server D:\Bodi. And given the path for data transfer.
    But the files are not getting generated for whatsoever reasons.
    Any advise on this would be helpful.
    Also found a bit unusual, that there was no button to test the connection to be correct or not, a TEST connection button is not there. Which i felt, could be included.
    Note : on the existing production system, we have chosen execute preloaded; shared directory on sap server. and shared that folder path for the user and given full rights. But while we try to do the same on the dev machine a test before transporting on production, a simple workflow does not work.
    would like to know what settings on sap server, really affect the data store options on the BODS
    thanks
    indu
    Edited by: Indumathy Narayanan on Jul 19, 2011 4:14 PM

    Indeed, BODS <> SAP connectivity can be tricky.
    For a development environment, I suggest you select the option "Generate and execute" for your "ABAP Execution Option." What this means is that DS will create, on the fly, small-ish ABAP programs. These ABAP programs will be written, in plain text, to a local directory on the DS job server, in the folder specified in "Generated ABAP Directory".  You can see them in there after an attempted job execution, assuming the job involves the creation of an ABAP program.  The ABAP program name is specified in the properties of an ABAP data flow, under Options > ABAP Program Name.  If you can't, perhaps the DS job server process doesn't have full rights to that folder - ?  After being generated on-the-fly, they'll be transferred to SAP to execute.  The SAP user you use to connect to SAP must have sufficient rights to upload-and-execute these ABAP programs, and that's a fairly substantial set of rights. What's required is documented in the BODS supplement for SAP. Often, to get things running, your friendly local Basis admin will grant SAP_ALL to the DS user, to see what rights are being invoked.
    Once all that jazz is working, you need to get the data back. There are a number of ways to do this. The method of data transfer is specified in "Data transfer method," where, ignoring "Custom transfer," you have three choices:
    1) Direct Download: easiest and slowest.  This method tells SAP to attempt to stick data in the client-side folder specified in "Local directory." Try this first.
    2) Shared folder: This is recommended when you have SAP being hosted on a Windows box. Basically: you set "Working directory on SAP Server" and "Data Services path to the shared directory" to point to the same folder.  SAP uses the "Working directory on SAP Server" to find this folder, and DS uses the other setting. So, for instance, if you were going to use the Shared folder method, you could set "Working directory on SAP Server" to "E:\BODS_Transfer", and, assuming E:\BODS_Transfer was shared-out as "BODS_Transfer", you could set "Data Services path to the shared directory" to
    dev12.somecompany.com\BODS_Transfer .  Then, you'd need to setup all the relevant security, as both SAP and DS need rights to read and write files in this folder.
    3) FTP (this is the method I usually use): SAP writes the "transport files" you're after (i.e., the data) in the folder specified in "Working directory on SAP Server". Then, you need to establish ftp connectivity to that folder from the DS job server's perspective, which you do by entering the ftp host name and the path to that folder in "FTP host name" and "FTP relative path to the SAP working directory".  In my opinion, the "relative" business is a little confusing, and I just typically enter the full ftp path, beginning the path w/ a forward slash, like "/usr/sap/tmp/BOBJ" or something like that.  You also need to obtain a separate username and password for the ftp connectivity. Note that this name and password has NOTHING to do with the SAP username and password; you're just setting-up DS to act as an ftp client. I strongly encourage you to test ftp connectivity by using a regular ftp client from the DS job server and attempt to connect to your ftp host using the username and password you were given, and attempting to fetch some sample test file. If you can't do this, manually, then DS won't be able to do it, either.
    Best wishes,
    Jeff Prenevost

  • Need solution for Use Case - Page Fragment?

    I have a set of controls and table which I need to insert into many tabs such that each tab displays the same table and functions but with slightly different data. The controls and table could be used in many different areas so doesn't make sense to code each and everyone mutiple times. I thought then that making this set of functions a page fragment and including it would do the trick, however, an exception that I have the same ID's defined was raised.
    Can someone tell me what technology I should use for this use case such that one a single page with tabs I can include the same set of controls many times? Can page fragments be used multiple times on one page or do I need some sort of declarative component?
    Thank you,
    Kris

    Task Flows is the way to go...
    Just create a bounded task flow and create a default view activity (which is going to be your page fragment with table and other controls).
    Now you can drop this TF on every tab and this way you will get a resuable table and control.
    Read about Task flows in dev guide if you need further understanding on this.
    One more thing, this will give you exactly same stuff on each tab. So, I am not sure what you want to change in every tab? A detailed description of your requirement might help.
    Vik
    Hope this helps
    http://adfjsf.blogspot.com
    http://www.linkedin.com/groupSharingMsg?displayCreate=&connId=-1&groupID=1801839

  • Need help for use crm fields into EJB2

    hello i need help.
    i have one db table (table_1):
    id_1
    field_1
    nad the second table that depends from the tale 1:
    id_2
    fields
    id_1
    id_1 is the field that join the table 2 with the table 1.
    can anybody helps me to implemet this relationship into the xml files and into the java class?
    into the java class for the second table i have:
    public abstract long getId_1();
    public abstract void setId_1(long Id_1);
    public abstract long getId_2();
    public abstract void setId_2(long Id_2);
    public abstract String getField();
    public abstract void setField(String field);
    how must i reference the relation into the bean and into the confdiguration xml files (i use Weblogic 8 and EJB 2.1)
    Thanks

    SRM doesn't use kind of "cockpit" LO-like in ECC.
    Overall picture:
    http://help.sap.com/saphelp_srm40/helpdata/en/b3/cb7b401c976d1de10000000a1550b0/content.htm
    If you setup data flows accordign Business Content of SRM:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
    Then just perform an init load and schedule the deltas.

  • Need license for using H.264 Video codec for live stream with FMS 3.5 series

    Hi,
        I am creating a live audio-Video chat application  in which I use H264 video codec for live streaming.  I am using Flash Media Server version 3.5.7. I read some where that H.264 Video streaming using FMS required seperate licencse. So I want to confirm , It is true that H264 video streaming required seperate license? If yes then what is the procedure to get license.
    Please let me know its urgent.
    Regrads,

    Hi Again,
    Thanks for your reply.
    Here are some articles/posts which says about Royalties to use h264:
    http://www.mpegla.com/Lists/MPEG%20LA%20News%20List/Attachments/226/n-10-02-02.pdf 15:27
    http://www.mpegla.com/main/programs/AVC/Documents/AVC_TermsSummary.pdf
    http://www.streamingmedia.com/Articles/ReadArticle.aspx?ArticleID=65403&PageNum=3
    http://www.mpegla.com/main/programs/avc/Documents/AVC_TermsSummary.pdf
    According to these, any  product/service provider, need to pay one time fee based on # of subscribers if we are using h264 for encoding and is charging fee from its users.
    About our business: We are web-conferencing solution tool provider and are using Flash Media Server version 3.5.7. I for audio/video. Please help me out if h264 is really free for us or we need to buy license to use that.
    Looking forward to hear from you soon.
    Regards,

  • Need advice for using Tempory tables

    Hi,
    I am soort of expert in SQL programming using MS SQL and SYBASE. But I am new in ORACLE.
    In SQL SERVER, using tempory tables are very simple. But it seems very different in ORACLE.
    1. Can I use create several different temp tables in a stored procedure?
    2. Dose the temp table has to be named as Temp_tablename?
    3. After executing the stored procedure, will those temp tables disappear automnatically? Should I manually clean them up?
    Thank you for help in advance.
    Karl

    1. Yes. You need to use Dynamic SQL within your PL/SQL code to issue any DDL command.
    2. You can name those temp tables whatever name you want.
    3. You need to issue "DROP table XXX" command to remove those temp tables. Why not use PL/SQL table within you PL/SQL code since PL/SQL is a memory construct and it will only exist during the run time of your PL/SQL code.
    Jack

  • Need help for using DPS

    Hi All - I am new to DPS and have few questions to clarify.
    I know DPS is Adobe tool for publishing digital content magazines to Tablet devices. What I want to know is – Is DPS is a desktop version of tool and can be installed like I did with CQ5.5 on my local machine?
    I have requirement to do the integration between CQ(AEM) and DPS. I found some materials on Adobe site for integrating AEM5.6 (via Media Publisher) to DPS. I do see similar options in AEM5.5 under Tools > Cloud Services  > Adobe Digital Publishing Suite. I did created a connection configuration using an Adobe Id. Now my questions are –In CQ 5.5. when I click the “Go to Adobe Digital Publishing Suite” (on
                   Cloud Services  > Adobe Digital Publishing Suite page ) I go to the Adobe online                site https://digitalpublishing.acrobat.com/app.html#. Is this the actual DPS ?
    On this above DPS online tool, Why the options “DPS App Builder For Mac, Analytics, Account Administration and Notifications” are disabled?
    I tried to publish the sample Folio and Article from CQ Publication page http://localhost:4502/publishingadmin#/content/publications/geometrixx-media/geometrixx-un limited/2013/january but it gave some error and I don’t see them to be pushed to DPS Folio Producer folder on https://digitalpublishing.acrobat.com/app.html#. What I am doing wrong here?
    I have CQ5.5 and what I can do with CQ available functionality in “Publication” (like Folio, Article)? Can I create a full magazine and publish it to DPS ?
    If yes how can I see the published content on desktop without using InDesign CS6 DPS tools (Adobe Content Viewer)? (I don’t have tablet device for testing)?
    Many Thanks for your help!!

    Hi,
    You can use Memory leak scenarios view in JavaProfiler for finding probable leaks in your application. Check out the Scenario view. You can run a scenario for your application, and it will show you all the instances that were allocated during scenario but were not garbage collected. You can then take Heap Snapshot and checkout all the objects that are reported as probable leak in your application. You can check out Incoming references of the concerned objects and check out what is holding back the instances from getting garbage collected.
    I am unable to understand the other part of your question regarding not being able to get the URL matched after running the Java Profiler. Can you provide more details on that? Do you mean you are not able to browse to your application while JavaProfiler is running? Please provide details like which AppServer are you running, and was the server started completely from JavaProfiler before you tried accessing your application. If not please wait for server startup to complete before trying to access your application through browser.
    For any furthur queries contact [email protected] From my personal experience I can assure you that the support team at AppPerfect is simply superb. You will get response to your queries almost immediately.
    Hope this helps.
    Regards,
    Kamlesh.

  • Need suggestions for using SAAJ

    Hi ,
    i am using netbeans IDE to develop web services. I am a beginner in web services. I am trying to use SAAJ API so that i can create and send the SOAP message. How do i do it in netbeans. i can only find JAX-WS and JAX-RPC in net beans.
    please suggest if there is any other tool that i should use..
    thanks for your time..
    regards,
    kartik.

    Laptop Video Editing PC http://forums.adobe.com/thread/1069742
    -and http://forums.adobe.com/message/4578948

Maybe you are looking for