Mp3 export to disk adds ~2 seconds

when I export(mp3) to disk a track I get ~2 seconds of extra blank time added to end of the track. I do not want any added time at all. I can turn on the "cycle region" and with trial and error reduced the added time to a very small amount but this is very time consuming and since I will need to export many short tracks to disk I really do not want to do this.
Is there a way to get Garageband to not add extra time at the end of the track that I export?
tks
Dennis

Hi, Jose,
I want the mixdown to be uncompressed.
Then you want to Share to iTunes so it will be an AIFF file.
WH

Similar Messages

  • [SOLVED] How to add a second disk to my HP Pavilion DV7 4320EL?

    Hello.
    I have a Pavilion DV7 4320EL. I know that it has a second slot to add a second HDD or SSD, but the connector can't be found. Someone knows where it is?

    Hi
    http://www.youtube.com/watch?v=EZgiX-pzdL8
    maybe help!

  • Exporting to disk leaves "quiet time" at the end

    Hi,
    When I export the song to disk (Share->Export to Disk) the resulting MP3 file has quiet time (more or less 4 seconds) after the loop music is played.
    I need it to end immediately after loop end (so that the sound file will loop properly in another application). Is there any way to fix this?
    OR
    Is there any way to mark the region that we want to export ?
    Thanks

    http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do i add a second movie to an idvd project when 'sharing' from imovie always opens a new idid window?

    I am creating an idvd project with multiple imovie projects.  I know I need to share my imovie project with Idvd.  WEhen I do that, idvd automatically opens.  Now I want to add a second project.  The problem is that when I share imovie projects a second time, it automatically opens a second idvd project.  I want to add multiple imovie projects on one idvd project.

    One should not share directly to iDVD from iMovie.  The Share ➙ Media Browser option should be used as that results in a better quality movie in iDVD.  Do the same for both movies and you can drag the movies from the Media ➙ Movies pane in iDVD into the DVD menu window at the left.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Can i add a second hard drive to my macbook pro

    can i add a second hard drive to my macbook pro

    stevefromapo wrote:
    I purchased a OWC DataDoubler kit with a 750GB hd and it works fine.  I just need to get a USB CD Drive for mac so if i need to reinstall my OS I can do it.
    You could put your install disc on a USB Flash drive with Disk Utility. Also, here is the USB optical drive enclosure I bought. He raised the price a few bucks. Mine ran $10.00 with the shipping. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

    I have an IMac with an external hard drive set up as  a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

    Open System Preference > Time Machine
    Click Options....
    Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
    Allan

  • Cannot add a second Hard Drive to H8 1380t Pavilion HPE

    This is post number 2 with a different issue. The first issue has been resolved. Thanks!
    H8 1380t intel chip set and processor (i7 3820), AMI Bios (latest version).. Just purchased on 8-11-12.
    I am unable to add a second, same size, hard drive. I have tried changing from Raid to ACHI and used all available SATA ports with the same result. The system will not boot at all. A "no operating system" message is displayed. The primary drive is on sata 0, I placed the second drive on: sata 1,3,4, and 5 with the same results. I even swapped the primary drive to sata 1 and placed new drive on sata 0 and this did not work.
    Then I used the recovery disk set and restored the factory image to the new drive. When trying to boot, using all of the above strategies, the system kept booting to the clean install??
    I have also changed the boot order in Bios and disabled the new drive for booting but for some reason I cannot get the system to boot to the first drive that has windows installed. It keeps booting to the new HD with no operating system, hence- the non-system disk error message or it boots to the clean factory install.
    I have done this many times before on other systems including an HP Elite I purchased last year. Read the how to's on HP's site and followed instructions. The Bios on this system is very different from previous bios I have worked with. It has UEFI and Legacy categories with various options and boot orders as subcategories.
    What am I doing wrong?
    Thanks
    Errare humanum est.

    Hi,
    Few weeks back, one user decided to go to a hardware store to buy brackets himself and problem solved. You may want to follow his method.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I add a second drive to a dv7t-7000 quad edition?

    The HP parts store said on one drive was supported but the configuration options showed
    several configuration with two disks.
    I had hoped I could add a caddy and power/bus connector from the parts store.
    I only configured the machine with one drive and want to add a second drive ( from my dead dv7 3085 dx ).
    The machine is supposed to arrive June 18
    Thanks for any insights...
    Jerry
    This question was solved.
    View Solution.

    emorejnavel wrote:
    The HP parts store said on one drive was supported but the configuration options showed
    several configuration with two disks.
    I had hoped I could add a caddy and power/bus connector from the parts store.
    I only configured the machine with one drive and want to add a second drive ( from my dead dv7 3085 dx ).
    The machine is supposed to arrive June 18
    Thanks for any insights...
    Jerry
    Hi,
    I believe that you can add a secondary hard drive to the laptop. Have a look at the service guide for the right caddy part number..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • NewBe question - Effects not exporting to disk

    Hi,
    I've been experimenting with GB. I have a Video with with an audio track that is very low. I imported the video into GB selected instrument with the audio on it. then on the info window clicked on edit and added the AUGraphicEQ to work bring up the levels. I have it sounding okay in GB. However when I go to share >> export to disk >> full quality, the output is the same as the input.
    I have also tried to turn off the track effect and apply it to the master, same result. I also tried to perform some effects on a jiggle track and export and mp3 with the same result.
    Basically I cannot figure out how to get the effects I hear in GB to become an output file.
    Any direction or thoughts are appreciated.
    Thanks,
    Mike

    Normally the effects should be on the exported audio file. Are you sure that they are not applied? Or is the level just too low? Try to turn off the auto-normalize feature in GB's preferences.

  • Help - no audio on share to iTunes / export to disk

    I havent used Garageband for a couple of years. I have just made a very simple 4 track, 16 second tune using only loops and FX.
    I have dragged the purple triangle back to the end of my loops to ensure there is no blank trailer, saved the project and tried both export to disk and share to itunes. The resulting output seems to have no audio.
    It plays fine in Garageband, but nothing when played outside from iTunes.
    This must be a simple problem. I seem to recall having to set an IN and OUT marker but cant find evidence this is necessary.
    Thanks

    Ah ha. Classic. iTunes was connected to my airtunes speakers which were of course turned off. That will do it every time.

  • Garageband: exporting tracks shorter than 5 seconds

    In Garageband I'm trying to export audio tracks that are not much longer than 1-2 seconds long - really short projects! - but when I do export them and then play them in my iTunes they are now about 5 seconds long. This is a bit lengthy for what I want them for. Is there any way of exporting a project that can be any shorter than 5 seconds? Anyone know?

    thanks for the 'oddball' pointer, and the 'zoom slider' thingy! I didn't know about these things. I tried them both and I really thought I would get it working this time but for some annoying reason my 1.5ish second project always exports with about 3 extra seconds of blank play time at the end. ARRRGH! It's always the small problems that really get me!! Thanks for all you're effort so far!!!!!
    THE STEPS I TAKE:
    1. I make sure the orange track is pulled back to 0 secs
    2. I press the cycle region button [the button with the two little recycling/circling arrows(which is right next to the play and skip buttons)]
    3. I use the zoom slider (very useful!! thanks) and then adjust the orange cycle region [which appears on the beat ruler] so that it is the same length [EXACTLY] as my 1.5ish length track.
    4. I try to pull the little end-of-track marker [the purple arrow] back [to the left] but will only come as far as 14:00 seconds?? weird!
    5. Then finally I go to 'Share' in the menu bar and 'Export Podcast to Disk...'
    6. I double-click my exported .m4a file which opens automatically in my iTunes but "lo and behold!!" it's no longer a 1.5 second track but a 5 sec one!!!!!!!!!!!!
    I want to keep my 1.5ish sec track 1.5 even after it is exported. Is it possible?
    My Garageband keeps adding those extra 3 seconds on the end when I export!!!!???
    Is there an option I haven't selected?

  • Pavilion dv7 - Can I add a second hard drive?

    I have an HP Pavilion dv7 2173cl laptop. I've read that I can add a second internal hard drive. Is that correct? If so, what is the max size that it will take? Any special type that I should buy?
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    This model allows to use 2 HDD's. Max capacity is 500 GB.
    To install second drive you will need Hard Drive Caddy and Cable Connector. You may buy them here.
    Here is service documentation for your model. On page 46 you may check where you may install secondary hard drive.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Can I add a second hard drive on Qosmio X500-12Q?

    Hi,
    i'd like to know if its possible to add a second hard drive to the X500-12Q ?
    i suppose the space is available but i'd like to know if the connector is here & everything
    so i could just open the enclosure and plug it in.
    thanks

    Hi jeandujardin,
    I dont have Qosmio X500 but generally speaking its no problem to exchange the internal HDD with a SSD but I dont know if the model has 2 SATA connectors.
    If you are not sure ask the salesman if its possible to install a second HDD or SSD.
    SSDs are no problem because they have the same SATA interface as normal HDDs.

  • Can I add a second hard drive and if so what cable etc would I need to do so?

    Can I add a second hard drive and if so what cable etc would I need to do so?
    This question was solved.
    View Solution.

    Hi,
    For many 17" (or 17.3") machines such as Envy 17, dv,  Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • "One or more field types are not installed properly" when I try to add a second discussion board web part to a page

    I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
    (one is open to all for comments, and one is open only to the project team to post but everyone can read).
    When I go to the pages for each of the discussion boards, they work fine.
    But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
    I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    Correlation ID: blah blah blah
    I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
    to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list.  I tried doing it from SPD with the same result. 

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

Maybe you are looking for