Mp3 player 512M MuVo TX FM please help

I just bought a Mp3 player 52M MoVo TX FM. This player support USB2(480Mbps) but when I copy Mp3 files from my PC to this player, it copy speed just 300KB+ and when I copy from this player to PC - it copy speed is 2MB+. It speed very low when copy from PC to MP3 player. I met some wrong. Do you like my problems ? thank for your reading.

Yes, but you'd have to have a very very VERY low specced PC to have transfers of 300kb/s.
I would double check that the ports you are using are USB2. Often the front ports on a PC are USB or simply not particularly good.
Also test the player with another PC if you can.

Similar Messages

  • Does someone has a mp3 player creative muvo

    <EM>i need some help</EM>
    <EM>i have a creative mp3 muvo tx player</EM>
    <EM>but now it doesn't work</EM>
    <EM>if i press on button it says "file system error"</EM>
    <EM>what the hell!!!!!plz some one could help me?</EM>
    :manmad:

    Try the recovery routine. Download the driver and firmware from http://www.nomadworld.com/downloads/drivers. Install the driver file. After you have installed the driver, press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file and check/tick the 'Format Data Area' check box and click on 'Start'.

  • Mp3 is opening in new page. please help.

    My mp3 is now opening in a new page when the button is clicked. It was working just fine for a while. Please, any help is appreciated, this is my portfolio and it isn't looking good for me if it isn't working. Thanks!

    I believe you're referring to the "click" image at the homepage that points to http://janthology.com/assets/get-a-job.mp3. It's just a link to .mp3 file clicking on which would simply force most modern browsers to play in the window. That is an expected behaviour. When you say it was working great for some time now, what was the behaviour earlier and what changes you made since then?
    Thanks,
    Vinayak

  • Adobe Flash Player Failure on PowerMac G5.  Please help!

    I have a PowerMac G5 computer, running OSX Version 10.4.11.  Up until yesterday, the computer performed flawlessly.  Suddenly, yesterday, I get a message from Firefox (the browser I usually use), telling me that my Flash Player had been disabled because I did not have the most up-to-date version of Adobe Flash Player.  When I investigated, I found out that the newest version was NOT compatible with my computer.  So I tried reinstalling the most recent version of Adobe Flash Player that IS compatible and have had no success.  When I go in to System Preferences and click on the Adobe Flash Player pane (under other), I get a message reading "could not load Adobe Flash Player."  What can I do?   Someone out there must know how to handle this.  I'm not in a position to purchase a new computer, and I desperately need Flash Player for some of the websites I use quite often.  I'm really frustrated and keep being given the "runaround."  Certainly there must be some way to fix this so that I can still run Flash Player on my computer!    HELP !!!

    Hello, yes it's a shame that they don't even test for our PPC Macs anymoreto see if the Update is applicable... which it isn't!
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or I put up the smaller ones here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • Bjork has ruined DVD PLAYER on my MAC! please help!!

    Long story short, finally got around to watching Dancer in the Dark and found it was region 1, so converted from the standard region 2 to 1 in the knowledge that I still had one more conversion to change it back to the 2.
    Having watched the film, which incidentally had the bleakest ending, I've found that it won't change back!! So I can only watch this one frickin film now!
    It still says I have 1 more oppurtuniy to change, but when I put a Region 2 DVD in and try it pops up with
    "Error code 70001"
    Anybody else encountered this problem? I would realy appreciate some help!
    cheers all.
    S

    Regional settings???my macbook OS X 10.4.11
    What am I meant to do I have moved country and cannot longer read DVDs on my player.
    Is there any way I can reopen the regional settings so as to be able to watch DVDs I have downloaded VLC and it will not work???
    my macbook OS X 10.4.11
    This is my DVD player
    MATSHITADVD-R UJ-857:
    Model: MATSHITADVD-R UJ-857
    Revision: HBEA
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    The DVD infoX said this
    Vendor: MATSHITA
    Model: DVD-R UJ-857
    Firmware: HBEA
    RPC-2 (region locked)
    State is PERMANENT
    4 vendor resets left
    0 region change left
    Region 1
    really hope ou can help
    thanks sally

  • XML driven FLV player with playlist, can someone please help me?

    OK so ive been working for a client recently building him a new site for his racing team and he wants a video jukebox on the "videos section" of the site.
    Now i am the one with the job of updating this jukebox with new videos which he makes (this happens often) so i want updating to be as easy as possible.
    Im new to the use of XML with flash and followed a tutorial to create a dynamic Image Gallery which is really easy to update, all i have to do is drop the files into the right directories in my FTP client and edit the XML file, perfect.
    I want the jukebox to do the same thing.
    I want to have a jukebox with a "video screen" with basic controlls (play/pause, volume, rewind, seek) on the left and a small vertically scrolling menu on the right that contains thumbnails and descriptions of the videos that when clicked changes the content of the video component to play the chosen video.
    I found a tutorial on the adobe site that shows how to achive this through the use of the "video component" and the "list component" in flash 8 HOWEVER, this isnt very pretty and almost impossible to customise due to the list component and i would like to be able to mimic the style of the image gallery i already produced to keep things all nice and uniform.
    i want to use XML to point flash to the source of the FLV files, the source of the thumbnail jpgs and give the text for the description so that its easy to update and use flash's drawing interface to make it pretty.
    Basically i want to reproduce something like this.
    Ive been searching for weeks now and i cant find anything to help me with this, if anyone knows of any tutorials, books, videos or has any idea how to help me it would be MUCH appreciated.
    Thankyou.

    Try this link:
    http://www.taiwantrade.com.tw/MAIN/en_front/searchserv.do?method=listProductComp anyDetail&company_id=163054&locale=2
    There is an email address and telephone numbers.
    Also look on the box and instructions.
    Ciao.

  • Mp3 player bro

    I bought a mp3 player(Creative Muvo TX SE GB) and i have the following problem:
    If i start the mp3 player then he goes out after a few seconds...
    If i try to add/remove songs the computer gives this error:
    K:\ Can not be openend
    Cant do the task by a fault in the I/O-device.
    I/O Input/Output
    Sorry about the bad english..please respond quickly! Thanx !
    Error in Dutch:K:\ is niet toegankelijk.
    Kan de opdracht niet uitvoeren door een fout in een I/O-apparaat.-Dutch

    That doesn't sound good. Can you format the player, or does it give you a similar error then?
    Cat

  • Creative MuVo Mix 256mb PLS HELP ME not play mu

    Hello all!!!I have mp3 player Creative MuVo USB 2.0 256MB model DAP-TD000and have some problem. When I turn on player I see green led and 3 sec green led it's changed a red don't play music. PLS help me !!!!!!!!!! Sorry for my bad English.

    Are you sure the battery is full? If it is, try entering recovery mode for your player (see stickied thread at the top of this forum).

  • Windows 8.1 pre-installed 64 bit operating system DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys) error. Please help.

    My computer is a brand new HP Pavilion 15-p231tu laptop, I have only had it for about a month and the hardware and software should be current. I am really annoyed by this error as it is interfering with my uni work, so any help would be great. The only
    software that I installed was Microsoft Office, ITunes, Trend Micro Titanium Security, Adobe Flash Player and Mozilla Firefox.
     Please help me solve this problem quickly, I need my computer to complete and submit a university assignment.

    Hello FedorableKitty,
    Please update the driver from the manufacturer website.
    About Windows 8.1 blue screen issue, please take a look at the following article.
    http://windows.microsoft.com/en-hk/windows-8/resolve-windows-blue-screen-errors
    Additionally, please upload the dump file for better analyzation.
    Upload to OneDrive:
    http://windows.microsoft.com/en-us/onedrive/add-photos-files
    Share files:
    http://windows.microsoft.com/en-us/onedrive/share-file-folder
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Can I hook up a third party MP3 Player to the MacBook?

    Hi:
    I have a iRiver H10 MP3 Player, id like to hook it up to my macbook.
    Is this possible via USB?
    I have it plugged into the macbook now, but I do not see the iRiver anywhere.
    Not in disk utility, not in iTunes.
    How can I see my iRiver?
    Thanks.

    H10 Players
    H10 Players are only compatible with Windows XP. They cannot be used on Windows 98SE / Me / 2000 or Macintosh computers.
    H100 Series, H300 Series and iGP players
    The H100 Series, H300 Series and iGP players are compatible with Mac OS versions 9.2.2 and 10.2 or higher.
    When attached, the player will display as an icon on the desktop. Open the icon to add files to the player. Note, the DB functions described in the manual are not available for Mac OS at this time, as the index cannot be created with Mac OS. This means that Album, Artist, Genre, and Title searching will not be available.
    BAH!
    If any Mac users got there iRiver H10 20gig MP3 Player to work with macbook, please contact me. Thanks.

  • I just downloaded the newest version of Itunes.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    I just downloaded the newest version of Itunes on my Windows 7 PC.  I can't delete anything and I can't sync to my MP3 player.  I tried deleting it and installing an earlier version of Itunes but it can't read the library.  Please help.

    With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
    This screenshot is from a Mac, but it should be similar on a PC :

  • Please help me! My mp3 player won't download m4a and m4p fi

    I'm trying to download some music from my pc onto my mp3 player, but for some reason it won't download m4a or mp4 files. I brought a load of music from iTunes last night, but they are all m4a/mp4 files. I'm new to mp3 players, please help me!
    ?Message Edited by Ashley32 on 0-03-200808:29 AM

    Actually if you purchase music, all MP3 (Protected - DRM and Unprotected) would work on the Zen. It is only m4a files which needs to be Unprotected-AAC. Like I said, Apple just want to protect their own industry but they are now opening up their market now by selling unprotected AAC at a slightly higher price.
    There are places like mp3.com which offers music which you can use.
    Alternati'vely, you can purchase music CD and use the provided software to extract the music to transfer to your Zen.Message Edited by eddy2099 on 0-03-200807:6 PM

  • Can I transfer my itunes to a MP3 player?  newbie, help please

    Hi, I need your help. I have a HP Media Center PC with all bells and whistles. I just learned about itunes. I downloaded a free song. I have also gotten 5 songs for free from a website called Connect (run by Sony).
    what I was expecting to do was to go to Radio shack and purchase an MP3 player for $59.99. It's about all I can afford.
    then I found out that the songs I downloaded from Connect cannot be transferred to an mp3 player unless it is a Sony MP3 player. The mp3 player in Radio Shack was not a Sony. but I did ask the salesman if I could do itunes with this and he said "sure". but I'm not sure now. I have read about all kinds of formats with downloading these songs. such as OPENMG format and something called ATRAC. See where I'm getting confused?
    What I need to know is this: If I purchase songs from itunes and it goes on my hard drive, can I then purchase the mp3 player and transfer the songs so I can go for a walk and play my mp3 player. I can't afford an ipod.
    Do I have to buy a special mp3 player to be able to use itunes. I can't find any information on this on the site.
    I am a disabled person and could use some help.
    thanks to anybody who can help me. Just need to know exactly what I should be buying to play songs on and do I have to download the songs in a special way or does itunes just do it for me. Also, I don't have an apple computer. but I have an APPLE user ID. Very confusing.
    Melody

    Okay, let me see if I have this right.
    I have a HP Pavillion Media Center. this should allow me to burn cds, right? I have never done this in my life but believe me I learn fast. I have two drives that I'm looking at right now on my tower.
    The top drive says LightScribe DVD+-/CD Writer
    The other drive says CD rom.
    I presume, to burn a cd (or whatever it's called), I use the top Lightscribe thing, right?
    so I guess I have to get a blank cd rewritable thing, place it in the top drive and copy the sonic stage (sony) songs onto that right? then I can get the ipod and transfer from the newly burned cd into the ipod, right?
    I have absolutely no idea how to accomplish this but I'm willing to at least do the first step and burn the cd.
    Now, here's my question. Many years ago, when I had my other HP pavillion,it came with a re-writable drive. I tried to burn something to it and I did not know what I was doing. I do remember that the cd was some kind of RW thing.
    I probably have one of those in my house. They are over 5 years old. Is this what I have to use to put the songs on it.
    do I have to go to the computer store and buy a new blank cd-rw (if that is indeed what I will be using).
    I want to know exactly what kind of blank cd thing I have to put in the drive. And do I use the one marked Lightscribe.
    See, once I know what to do, I'll figure out how to do it.
    I'm going to search my room to find one of the old blank ones but I won't use it until you say, "yes, use it.".
    I know I used to have a case of them. Never used them but they are still around.
    Are they still compatible with my windows xp, HP Pavillion media center.
    And I should tell you what I tried to do last night. I was researching all about converting files and I saw something that said "drag the files into your itunes folder and you should have the songs in their". so stupid me, I go to my start menu, open up the explore thing, I find the "sonic stage" thing, I see the itunes thing, I dragged and sonic stage into the itunes thing and sure enough, right in front of me a little message popped up showing me it was "copying files to itunes". So I said "holy sh*t, I actually did it", "i'm going to see my songs in my itunes folder". Well, that didn't happen. I opened up my itunes library and only my original itunes song was there. No songs from the sonic stage library was put in.
    I have no idea what was copied into what. So what exactly did I do?
    thanks for any help about the cd burning thing.
    I mean, I have this HP Pavillion Media Center and I want to be able to figure out how to use it before I turn 80.
    Thanks much.
    Melody

  • Zen v mp3 player won't turn on help me!!!!!!! please!!!

    My zen v mp3 player won't turn on or charge or anything? but the buttons light up. How do i make so my mp3 will turn on Help me!!!!!

    nevermind i got it working!!! :smileyvery-happy: im sooo happy!!!!

  • HELP ME ! MuVo Tx FM - MP3 Player IS D

    [color="#0033cc">I tried to update the firmware for my MuVo TxFm mp3 player, while process I format the data area, Since than I can not turn on the player, even I connect it to pc it does not work at all[color="#0033cc">what I need to do ?Message Edited by monpatel on -09-200605:37 AM
    Message Edited by monpatel on -09-200605:42 AM

    I have the same "symptoms" but different reasons why my player behaivos like this. Have to tried to start the firmwareupdater again?

Maybe you are looking for