MP3 player and USB

I just purchased a ZipLinq . USB cable to use with my MuVo Slim, but it will not work. I'm fairly certain the Slim is backward-compatible with USB ., so I don't understand why. Trying to determine if the cable itself is faulty. I can use the Slim just fine with my larger MacCalley adapter, which has a wider cable, and of course with the cable that it came with.
Has anyone successfully used your MP3 player with a compact, retractable USB . cable?

If the cable is cited as USB it might not be good enough quality (really the whole USB or 2 thing for cables is just a quality issue).

Similar Messages

  • TS1367 Got a Riptunes MP3 player and put USB cord from mp3 player to MacBook Pro to install music and it immediately shut down my computer and it will not turn back on and wont charge now...never had a problem with computer before

    Got a Riptunes MP3 player and put USB cord from MP3 player to MacBook Pro to transfer songs and my computer immediately shut down and won't power back up and won't charge now....what do I do!?

    Take it in for a service diagnostic so you can determine if it's worth fixing or if you should buy a new one.

  • Anyone with an iRiver MP3 player with USB host por...

    Any iRiver MP3 player with USB 1.1 host port will interface with your n95. This will allow you to read and write to the mem card of your phone! So you can u/l sound tracks and d/l your images from and to your MP3 player.
    My H340 is a 40GB version so I have got mass storage attached to my phone.
    If only it was WiFi or Bluetooth as well!!
    www.blogn95.blogspot.com

    I just plug my MP3 player into the phone and browse from the player!
    No pain really!
    www.blogn95.blogspot.com

  • I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    iTunes: How to convert a song to a different file format

  • I have an mp3 player and want to use itunes

    I have a scan disc mp3 player and would like to transfer music from itunes to put in it. thanks greg

    iTunes only supports iPods, iPads and iPhones.

  • How can I connect my Creative mp3 Player and my car ste

    I need to connect my Creative mp3 Player and my car stereo (Peugeot 407 standard car stareo). It haven't cassette player or an "AUX IN" hole. Any Idea?

    <FONT face=Helv size=2>
    Unfortunately (for us consumers) there are few options.
    ) Use an FM transmitter which does not work in your area.
    2) There was a post in this forum where the person had a device installed that would switch from the car antenna to an FM transmitter. So effecti'vely, the FM transmitter is spliced right into the antenna line into your car stereo. The theory is that it's either using the car antenna or your MP3 player, but never both. There are no competing FM stations. The use also said this cost them $200 .... which makes option 3 a better deal considering FM will decrease the fidelity of a MP3 player.
    3) Buy a car stereo with an input jack .. as SSR as sited.
    4) You can buy a cassette adapter ... if your current car stereo has a circa 20th century cassette player.
    5) Start a grass roots effort to lobby car manufacturers to put in a input jack in the car stereos. The American companies might be softened after this SUV bust.
    If you pick #5, I'm available to stamp and stuff envelopes ......
    Ciao

  • What if you tried doing the clean up on your mp3 player and it don't work in rescue m

    i tried doing a clean up cause my mp3 player is in rescue mode and it don't do anything. i've never formatted anything in my life so i'm a little nervous about doing that. is there some keys you hold to get the clean up to work. i have a zen xtra mp3 player. it is my husbands. so if anyone can help me out there please e-mail me at [email protected] and put in the subject line rescue mode help. tracy

    and how do i do that i've never done that before?tracy

  • I purchased music and now it I am unable to transfer it to my mp3 player and I really dont want to have to pay for them again any suggestions

    Ipurchased music and now I am unable to transfer it to mp3 player. I dont want to have torepurchase my music again. Does anyone have any suggestions

    Read the instructions that came with your mp3 player to learn how to put music on it.

  • I'm trying to download an audiobook to a non Apple MP3 player and itunes keeps popping up as the default. How do I turn this off?

    I'm trying to download an audiobook to a non Apple MP3 player from a library sharing site, but itunes keeps popping up and preventing me from doind so. How do I set my itunes to NOT be the default for downloading media.

    http://windows.microsoft.com/en-US/windows-vista/Change-the-default-music-or-vid eo-player

  • If you didn't have an MP3 player, and the Xtra and the Micro cost the same. what would you g

    Lets say the Xtra and the micro cost the same price. You don't have an Mp3 player yet. You still have the knowledge that you have now for both products.
    Which mp3 player would you pick and why?

    right now i own the micro. If i had the chance to pick again with the knowledge i have now, I would go with the Xtra.
    Because before i didn't know anything about bit rate...... I thought the micro could hold up to 2500songs.
    I learned that it will only hold about ,030 songs wma 60kb
    ps.
    NOT COOL.

  • MP3 Player FX120/ Usb erro

    I just bought MP3 Player FX20 today.
    problem is: when I connect the usb dri've to the mp3 player - there's no response. I don't even see the 'Removeable Disk' icon inside the My Computer. What should I do? Do I have to upgrade my usb port? (I think it's upgraded since I have service pack 2 - windows xp)

    WildDri've,
    You may have to manually map the dri've letter to the player. Check this Knowledgebase article.
    Jason

  • Mp3 player and linux

    Hi!
    I have mp3 player Cowon D2. After connecting it to the PC arch discovers it as f.e. pendrive. But the problem is with unmounting. I use KDE 3.5.7, in media:/ I right-click on it's memory, then I click to safely remove. But an error appears telling that unmounting was successful, but ejecting have failed.
    What might be wrong?

    Nothing... As the message says, the device can simply not be ejected (since it's plugged in and no CD or whatever, which can be ejected by the station). So just unplug the player, it should be fine.

  • Faulty mp3 player and customer support page does not w

    I sumitted my problem online to the customer support but when I hit the submit button I get redirected from http://us.creative.com/support/contact/emailform.asp to a non-working URL http://dmzrespapp.europe.creative.com/kana/FRH
    I do not get an e-mail confirmation either. But maybe you can also help with my problem below
    I have an Creative Micro Zen mp3 player
    When I start or reboot the mp3 player it hangs at the 'CREATIVE' logo and stops responding. This started 3 weeks ago.
    I followed the steps below as suggested by Creative's knowledge base:.) Clean up2.) Format3.) Reload Firmware4.) Reboot
    At each of these steps the player does not hang (I can hear the sound feedback when I touch the control buttons), but I stays there for hours saying i.e. 'Cleaning up', 'Erasing Firmware'

    After I have read the FAQ I came across this last resort, tried it, and succeeded. Now it works again
    http://www.nomadness.net/modules.php...ukebox+Zen#209
    My Zen won't startup, what do I do?
    align=justify>If your Zen won't startup the first thing to try is see if you can access the Maintenance Menu (click here for the procedure) and run a disk cleanup. If this fails, or if you are getting the "hard dri've error" message on startup, listen closely to the Zen when it starts up. If you can hear the hard dri've repeatedly clicking at the end of the start up chances are the heads or related mechanics are jammed in some way. <B>At your own risk</B> you can try and free this by firstly powering the player down, then giving it a hard slap on the side. An alternati've and less drastic approach is to hold it in your outstretched arm with the screen towards you and twist your wrist back and forth as quickly as you can. This might indicate a problem with the player, so you may want to seek getting your player replaced/repaired anyway, especially if this happens more than once. Also if this procedure doesn't help you will also have to look at getting the player repaired, or if out of warranty you can try repairing the hard disk yourself. See the Articles section for guides on upgrading. Note that you <B>should not hit your player</B> in any other circumstance as you could damage the hard disk. Hard disks make clicking noises in normal operation.

  • My Forth Creative Mp3 Player and counting

    I have just got my fourth creative Mp3 player. You would have though I would have learnt my lesson by now!
    First one (Zen Micro)was faulty when purchased so went straight back to the shop.
    Second (Zen Micro) lasted 8 months before stopping working one day.
    Third (Zen Microphoto) lasted 3 months before the screen stopping working correctly.
    Forth and current(Zen Touch 40gb)lasted 3 days before becoming faulty.
    I've contacted support as it seems to have the same firmware error problem as numerous others. Is there a fix? I have seen so many threads but not many positi've results.
    As far as I am concerned this is the last Creative player I shall buy. If they can't get me fixed up it's going back to the shop for a refund or exchange for anything but a creative player.
    Do others have such a poor experience of Creative players or am I just having a bad experience?Message Edited by Ainslie on 07-0-20070:37 AM

    I bought a 30gb Nomad Jukebox Xtra 3 or 4 years ago, and only now it quit on me. And only the LED screen, after going through a rainstorm; everything else still works. I just bought a 30gb Zen Vision M to replace her. So far so good. Defecti've products happen. So do unlucky people

  • Mp3 Player and Itunes media version

    Ok i have read from at least 1 user that i cannot convert the files i download from m4p to mp3 format. I wanted to know if this is true?
    If so than im in a bit of a bind and have another question. I have an mp3 player that is not an Ipod the only problem with it is now apparent, it doesn't support m4p files. I plan to contact the company but the question really goes back to my first one... Is there any possible way to convert these files to mp3?

    it would just be great if Apple Itunes would allow us
    to authorize our non-Ipod Mp3's, considering we
    purchashed all of this music from them. would you
    agree?
    PC   Windows
    XP  
    Absolutely agree. I spent 4 hours yesterday Hijacking the Audio on a double album and relabelling the tracks. At least when you download from limewire the labels are (reasonably) intact and you can play the music out of the box. I want to pay for music, that is fair, but I won't be paying Apple if I have to go through all this grief. As the drawbacks inherent in iPods become clearer to consumers and sales level and drop Apple will have to address their compatibility issues or they will be stuck in the corner by themselves again.

Maybe you are looking for

  • Showing the XML publisher report in an iframe..

    Hi all.. Please help me with this question. Before: We had a "http page" and we are showing a XML Publisher report which is also in "http" ,in an iframe of the parent page. Previously it was working fine, as both are http. *** Basically we are genera

  • Error while creating DB CONSOLE conf and rep using EMCA

    Dears, I have 10g R1 database and used to have a db console for DEMO database. I deleted that using EMCA -X DEMO...deletion was successful. Now i;m trying to create the em db console conf and rep again using EMCA...when i finish entering parameters i

  • Code for select statements needed

    Hi Please give the code for this Code (BUKRS), Vendor (LIFNR), Vendor Name (ZNAME1), PO_Date (AEDAT), PO Creator (ERNAM) from EKKO table 2. For the corresponding PO number (EBELN) from EKKO table, get PO Item Text (TXZ01) from EKPO table 3. For the c

  • Make select for each row - another solution?

    For example I have a function with day before selection: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> function ABS return boolean is ret number(10,2); begin for sab in (select saldod from ndv_ccli, nd_clientes where (:p_dtvenc-dtdo

  • Gmail acct suddenly not syncing

    I'd been using Gmail via the Mail app as an Exchange account with no problem, as well as gmail's Contacts and Calendars, and suddenly this morning it's not working. I can access Gmail in Safari fine, and do not have 2-step verification enabled. I res