Mp3 player bro

I bought a mp3 player(Creative Muvo TX SE GB) and i have the following problem:
If i start the mp3 player then he goes out after a few seconds...
If i try to add/remove songs the computer gives this error:
K:\ Can not be openend
Cant do the task by a fault in the I/O-device.
I/O Input/Output
Sorry about the bad english..please respond quickly! Thanx !
Error in Dutch:K:\ is niet toegankelijk.
Kan de opdracht niet uitvoeren door een fout in een I/O-apparaat.-Dutch

That doesn't sound good. Can you format the player, or does it give you a similar error then?
Cat

Similar Messages

  • After an 'Update' My MP3 player Bro

    So i downloaded 2 updates for the Creative Zen Nano Plus and Installed Them... next thing i know, my MP3 doesn't turn on and when I try and plug into the computer, nothing happens. After having this MP3 player for quite a while, im sure the garantee has run out so is there any way i can fix my MP3 or get a refund... or somthing because i dont have the money to buy a new one. I am really upset because I really need my MP3 player!
    I Send a message to the customer support and it said to download the installer that broke my MP3!!! now im sure it would work but the download doesnt recognise the MP3 Player! please help me!Message Edited by TheCookieMonste on 08-22-2006 0:44 AM

    Bump!

  • I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    iTunes: How to convert a song to a different file format

  • What if you tried doing the clean up on your mp3 player and it don't work in rescue m

    i tried doing a clean up cause my mp3 player is in rescue mode and it don't do anything. i've never formatted anything in my life so i'm a little nervous about doing that. is there some keys you hold to get the clean up to work. i have a zen xtra mp3 player. it is my husbands. so if anyone can help me out there please e-mail me at [email protected] and put in the subject line rescue mode help. tracy

    and how do i do that i've never done that before?tracy

  • How can I fix 2121 sandbox security error, local swf MP3 player test calls MP3's from website?

    1st Issue.  I am a new user and am fighting #2121, #2044 & #2048 Flash security errors in getting an MP3 player to work as I test the fla file in Flash CS4 on my local computer.  The fla in Flash and swf in Dreamweaver calls mp3 files from our host server on the internet.
    After reading various sparce posts and Adobe articles on this issue, I have added a crossdomain.xml file at our websites root (see file below) and added the code, flash.system.Security.allowDomain in line 1 of the action script of the flash fla to allow our site access (-see script below).  These efforts have helped get the player to work better on our test site.
    But, I am still getting the 2121 error within Flash CS4 as I debug the player or play the swf in live view within Dreamweaver.  Playing the fla or swf will lock-up the Flash 10 player and crash the program. I am having the mp3 player access the mp3 files from our web site as I test the fla.
    Here is the debug message I am getting:
    Attemping to launch and connect to Player using URL C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf [SWF] C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf - 209827 bytes after decompression SecurityError: Error #2121: Security sandbox violation: Sound.id3: file:///C/Web%20Site%20Files/Plank%20Productions%20afc/Plank%20Productions%202010/site/MP3%5FList %5FPlayer%5FAS3.swf cannot access . This may be worked around by calling Security.allowDomain.
    at flash.media::Sound/get id3()
    at com.afcomponents.mp3player::MP3Player/get id3()
    at com.afcomponents.mp3player::MP3Player/handleBuffe ring()
    Here is the crossdomain xml code:
    <?xml version="1.0" encoding="utf-8"?>
    <?xml version="1.0"?><!DOCTYPE cross-domain-policySYSTEM "http://www.macromedia.com/xml/dtds/cross-domain- policy.dtd">
    <cross-domain-policy>
    <allow-access-from domain="www.plankproductions.com" secure="false"/>
    <allow-access-from domain="plankproductions.com" secure="false"/>
    </cross-domain-policy>
    Here is the AS3 in line 1 of the Fla file that I added:
    flash.system.Security.allowDomain("www.plankproductions.com", "plankproductions.com");
    2nd Issue.  The online playback of the mp3 player will play about 4-7 mp3’s then lock-up in Internet Explorer 8 on a pc.  I think that is related to flash security, not sure, I do not know how to debug the mp3 player on the web site.
    http://plankproductions.com/pptemplate_afc_mp3.shtml
    Questions.
    -How can I resolve the error 2121?
    -What as3 code do I need to target the local c drive to have security clearance and work properly, is this the problem?
    -Why is the mp3 player locking up on the web page?
    Thank you in advance for any help.
    Operating System: Windows XP Professional, CS4 Web Premium

    Do you have the standard or debug player installed?  Such errors should not occur with the standard player.
    See http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_

  • I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?

    I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?
    Thanks

    I tried Notpod but can't get it to work.  Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+).  I also can't do this in Windows Explorer.  Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
    The error mesag I get in Notpod is:
    "Unhandled exception has occurred in your application.  If you click Continue, the application will ignore this error and attempt to continue.  If you click Quit the application will close immediately.
    InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
    Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
    I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
    Thanks anyone who can help

  • How can I copy my iTunes library over to my MP3 player?

    I have all of my songs saved in my iTunes library and on my iPad.  How am I able to get this transferred over to my Sony MP3 player?

    Read the diresctions for your mp3 player.

  • I have an mp3 player and want to use itunes

    I have a scan disc mp3 player and would like to transfer music from itunes to put in it. thanks greg

    iTunes only supports iPods, iPads and iPhones.

  • Is there a way to transfer songs from a Sony 16GB MP3 player to an iPod Classic? Tried dragging the songs to iTunes,only accepted 1400 of the songs. MP3 player was full.  I also had compiled the songs in a specific order and iTunes changed order.

    Is there a way to transfer songs from Sony 16GB MP3 player to an iPod Classic?  Tried dragging the songs to iTunes but it only accepted 1400 of the songs, MP3 was full. I also had compiled the songs in a specific order and iTunes changed the order.

    The songs from the Sony MP3 player need to be imported into your iTunes library first before they can be synced or added to your iPod Classic. 
    Regarding the songs that didn't import into iTunes, what format are they in and what seems to be different from them compared with the tracks that did import?
    B-rock

  • How can I use Iphone 4 as an mp3 player without a sim card until I get one?

    Hi,
    How can I use Iphone 4 as an mp3 player without a sim card until I get one? I just bought the phone and each time I try to switch it on to use the mp3 player, I cannot. It asks me to insert a sim card and I don't have a sim card yet. I was thinking I could use the mp3 player function of my phone until I buy a sim card.
    Thank you for your help in advance,

    Thank you, I understand, yeah, I knew that, my phone is factory unlocked and I am going home, which is obviously not in the States and I am thinking of buying a local carrier there. However, I still have 2 weeks before I leave and cannnot wait to start using my Iphone 4. I thought at least I could use the mp3 player function. So as far as I understand, I cannot activate it without a sim card. I have been using metropcs for about two years and it does not have a sim card. In this case, do I really not have another choice but wait for two weeks to listen to music? My Mp3 player just failed me and I really need to listen to music but on the other hand, while I can use my iphone as an mp3 player in two weeks, I don't want to spend more money on a new one. So, do you have another suggestion? For instance, can I use a friend's sim card to activate mine? Would this cause any trouble, when I go home and buy a local carrier? I think these questions might kinda sound weird to you, but first time with an Iphone, extremely excited to start using under my circumstances, I need help   thanks,

  • How to transfer all music in my Zen Micro to either my PC or another mp3 player....help ple

    i have a creative micro zen with about 000 handpicked and some very hard to find songs on it...i don't really have trouble with the player itself, just the software and the continous problems seems like everyone is having with something... my question is this..........if i wanted to get another mp3 player as a backup in case this one crashes, then what does everyone think about one of the smaller ipods? what about their software and such? and, if i do decide to get an ipod, then how would i transfer all these 000 mp3 songs onto the new ipod? would there be an issue with the fact that they are not bought from itunes?? would it not be safe to do that? and if it is okay to do that,? how would i transfer the songs back onto my PC, as i have tried everything suggested on this board recently in trying to do that using Mediasource and it just won't work even after downloading all new plugins etc. if someone has an idea about this, please let me know step by step if possible about how i can get these songs that are valuable to me from my zen micro, to my computer, and then onto another mp3 and if ipod (nano for instance) is a wise choice or if there is another player in the same category that others have found they have waaaay less problems with and better support/service with it's?any help anyone gives would be greatly appreciated!? i appreciate all the suggestions to my other questions as well!?thanks,barb

    for a new mp3 player, i would get this one, its awesome (and the one i would get if i had a choice instead of my microphoto that broke)... here's a link
    http://reviews.cnet.com/Samsung_YP_T9_4GB_black/4505-6499_7-3208083.html the 4gb one is $80, the 2gb one is $30... so thats cheaper than an ipod, and much better features and stuff

  • Using a different brand MP3 player in iTunes??

    i have some other brand MP3 player (not iPod). how do i make it show up in my iTunes so i can drag and drop songs into this MP3 player? or can i not? it just shows up like a hard drive on my desktop now.thanks.

    There are a limited number of other players that will show up in iTunes for Mac but apart from the phones from Motorola none can play content from the iTunes Music Store. The Creative Zen Nano Plus is one that does connect and that you can drag tracks to from within iTunes. However yours may not be one of the few compatible models. Apple haven't updated the compatibility list for years, this is the only one I could find: iTunes for Mac OS X: Compatible Players

  • How can I export songs from my ITunes library to a different MP3 player?

    I need to copy some songs (or a playlist) from my ITunes library to a non-IPod MP3 player.
    Thanks,
    Leonid

    Please see this:
    Scott P.: Does iTunes support non-iPod devices?

  • Can i transfer music from my mp3 player to my ipod nano????????????????????

    some one help me please. i am wanting ot transfer music from my mp3 player to my ipod. is that possible. i copied and sent it to my ipod in my computer and it shows up in my computer that my ipod has the music files, but when i unplug my ipod, the songs are not there. help???????????????
    thanks
    carlitos3373

    carlitos3373,
    You need to use iTunes to transfer music to your iPod. You can download the latest version here:
    http://www.apple.com/itunes/download/
    Hope this helps,
    Jennifer B.

  • What is in the iPod touch that makes it wifi compatible ? Is it possible to make a mp3 player wifi compatible ?, What is in the iPod touch that makes it wifi compatible ? Is it possible to make a mp3 player wifi compatible ?

    I'm tryna make my mp3 player wifi compatible but first I need to know if it's possible or what I need to buy

    You cannot.  It would have to have a wi-fi radio installed into the device and the software to run it.

Maybe you are looking for

  • I have a HP 3055 all in one attached to a wireless print server. I got in working on one laptop Win7

    I have a HPa  3055 all in one attached to a wireless print server that works with one Dell laptop that I upgraded from XP. But I can't get a New Toshiba Win7 to work wireless, but only with cable.

  • "Search Result Types" Error on page view

    When visiting "Search Result Types" under Site Collection Administration on a few of my site collections I get an error. This only happens on some of the site collections and I can't pin down why its occurring. I've tried disabling "SharePoint Server

  • Transaction attribute

    The transaction attribute is set as TX_NOT_SUPPORTED.What happens if the client calls the bean without a transaction in effect?

  • Can't install a 2nd suite

    Hello On my work computer, I have the Web Premium installed and was given a Production Premium license since I'm going to do some editing work. Problem is, the licenses seem to conflict each other. When I started installing the Production suite, the

  • When-button-pressed---adding a "select statement"

    Hi friends, i have a select statement: select count(*) from employees where emp_no=:control.emp_no; i would like that when i press a button, count for instance, i get the number of employees. I need the codes used in oracle in the when-button-pressed