MP3 Player FX120/ Usb erro

I just bought MP3 Player FX20 today.
problem is: when I connect the usb dri've to the mp3 player - there's no response. I don't even see the 'Removeable Disk' icon inside the My Computer. What should I do? Do I have to upgrade my usb port? (I think it's upgraded since I have service pack 2 - windows xp)

WildDri've,
You may have to manually map the dri've letter to the player. Check this Knowledgebase article.
Jason

Similar Messages

Anyone with an iRiver MP3 player with USB host por...

Any iRiver MP3 player with USB 1.1 host port will interface with your n95. This will allow you to read and write to the mem card of your phone! So you can u/l sound tracks and d/l your images from and to your MP3 player.
My H340 is a 40GB version so I have got mass storage attached to my phone.
If only it was WiFi or Bluetooth as well!!
www.blogn95.blogspot.com

I just plug my MP3 player into the phone and browse from the player!
No pain really!
www.blogn95.blogspot.com

MP3 player and USB

I just purchased a ZipLinq . USB cable to use with my MuVo Slim, but it will not work. I'm fairly certain the Slim is backward-compatible with USB ., so I don't understand why. Trying to determine if the cable itself is faulty. I can use the Slim just fine with my larger MacCalley adapter, which has a wider cable, and of course with the cable that it came with.
Has anyone successfully used your MP3 player with a compact, retractable USB . cable?

If the cable is cited as USB it might not be good enough quality (really the whole USB or 2 thing for cables is just a quality issue).

How do I put music on new MP3 player please

hello, received my new creative zen nano plus MP3 GB player today, looked forward to getting it before my holiday, it arri'ved, thought I would have Music on it by now but NO.
For the life of me - I can't do it. I have spent all afternoon doing it and driving me nuts now.
PLEASE help...... I looked at the intructions, but still no.
I have them ripped from CD, in WMA and also in MP3. Then moved them to Library. Then dragged them to F: creative zen folder. I viewed the folder and saw them, removed the MP3 player from USB port and when I looked at music symbol using scroll it said no recording.
Fed up with it already. Need advice......also is if I get there, is WMA better then MP3

This is what you find in the FAQ's:
? Should I use the WMA or MP3 format?
WMA is better at lower bit-rates, 64-28 kbit/s, where disk space is more important than sound quality.
MP3 (encoded using LAME) is somewhat better than WMA when encoding at higher bit-rates, 92+ kbit/s. This should be used when sound quality is more important than disk space.
Ultimately it's important to try some different bit-rates with both WMA and MP3 for yourself, and see if you can tell the difference. The only caveat is that over time it becomes easier to hear artifacts that low bit-rate compression uses.
If you need more information, try google: "mp3 vs. wma".

Mount usb mp3 player

Having some probs mount my mp3 player.
Dmesg gives this:
usb 1-1: new full speed USB device using uhci_hcd and address 6
usb 1-1: device descriptor read/all, error -71
lsmod gives this:
usb_storage 62272 0
usbserial 25576 0
usbcore 100484 5 usb_storage,ndiswrapper,uhci_hcd,usbserial
ide_core 102864 29 usb_storage,ide_floppy,ide_cd,ide_disk,via82cxxx,
trm290,triflex,slc90e66,sis5513,siimage,serverworks,
sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,
it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,
cmd64x,atiixp,amd74xx,alim15x3,aec62xx
Any ideas. Thanks in advance.

jaboua wrote:
briancurtin wrote:what is in your fstab file?
That doesn't matter if the kernel reports device problems
I didn't think so either but here it is anyway:
# /etc/fstab: static file system information
# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fl vfat user,noauto 0 0
/dev/hda3 / ext3 defaults 0 1
/dev/hda1 /boot ext2 defaults 0 1
/dev/hda2 swap swap defaults 0 0

Usb not seeing mp3 player? brand new s10!

brand new s10, all ok but neither usb port seeing mp3 player.(sandisk clip) mp3 used on other computers, no problem.

USB port does not see MP3 player. I looked at "support & downloads". Nothing there about USB's.
This is crazy, I have never had to download drivers for a NEW computer to make the USB's work.

Msi usb mp3 player i/o error

i recently connected my megastick usb mp3 player and windows diaplyed a window that says: the request could not be performed because of an i/o device error. Now i can not store files to my usb mp3 player. How do i fix this problem???

An I / O error often indicates a read/write problem to the device, oftern ocours more on Harddisk dri'ves. Upgrading the firmware to the player should sort this out, otherwise there may be someting else wrong with the player. For example the player cannot read/write to a specific cluster on the harddisk. But as the player is PSS (i think), (Portable Solid State) then this is a bit odd, but could possibly be the same problem as above , not read/writeing to a specifc sector/cluster of the memory.

USB MP3 Player

Recently I buyed a MP3 Player and Arch (with KDE SC) not mount or give access to the device.
lsusb shows this ID: 1234:5678 Unknow
I try to mount the device but it's not working...

ouput:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: ASRock Incorporation Device 2570
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ff000000-ff0fffff
Prefetchable memory behind bridge: b7f00000-f7efffff
Kernel modules: shpchp
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ff27fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff100000-ff1fffff
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fc00 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Device 24d1
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at d400 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=8]
I/O ports at c800 [size=4]
I/O ports at c400 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: ASRock Incorporation Device 24d0
Flags: medium devsel, IRQ 17
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: ASRock Incorporation Device 9761
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at d800 [size=256]
I/O ports at dc00 [size=64]
Memory at ff27f800 (32-bit, non-prefetchable) [size=512]
Memory at ff27f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
Kernel modules: snd-intel8x0
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A9550GE/TD
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=256M]
I/O ports at a800 [size=256]
Memory at ff0f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff0c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon
01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary)
Subsystem: ASUSTeK Computer Inc. A9550GE/TD (Secondary)
Flags: bus master, 66MHz, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at ff0e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASRock Incorporation Device 8139
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at b800 [size=256]
Memory at ff1ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

Suggestion for creative's next MP3 Player, connection for USB Flash Driv

I would to see a connection for USB flash dri'ves to be added to the next mp3 player Creative makes. This way we don't have to rely solely on expensi've and limited in memory SD Cards.

I'm a bit confused as well, flash dri'ves are all more expensi've than the SDHC cards I have of the same size, and a whole heck of a lot more bulky and oddly shaped. I can't see myself strolling around with a ZEN with a plastic knob sticking out of the side, but that's just my opinion.
I like SD cards, they are slim, extremely light weight and easy to carry (mobility is pretty much the entire point of a portable player). It makes it really easy to purchase a few SD cards and use them like interchangeable disks. They are also pretty cheap and rapidly getting cheaper.

Abstract out MP3 *player* functionaltiy from USB drive stor

Has any company thought about "abstracting out" the MP3 / WMA / WAV / other-format player functionality from the USB dri've storage?
Considering the proliferation of USB memory dri'ves, I think this a good idea.
So, what I envision is a little mobile MP3 "shell player" device which is simply an MP3 (or other format) decoder chip and D/A decoder, audio amplifier and a headphone jack, perhaps with a rechargeable battery. It would have a female USB jack, and would accept any type of USB memory stick. That way, you can just swap USB memory sticks .. and this hypothetical MP3 "shell player" would detect playable files on the plug-and-play memory stick and organize them for mobile play.
So who will be the first to offer such a device?

You should look for a support site for the MP3 player to see what format it uses and what the proper restoration procedure is-either that or contact the company directly.

Playing my ipod through my boombox MP3 player usb port

my boombox has a usb port and apparently the ipod can be attached to play through it. I could buy some speakers but it would be better to use the MP3 player i already have. But although the ipod plays through the earphones, it won't play or recognise my ipod tracks when attached to the boombox although for some quirky reason it did for a while play just one album. Can anyone help me? I've been going crazy reading instuctions & now feel very frustrated with it

Contact the manufacturer of the motocycle system. Many systems are not compatible with iOS devices but work fine for the simple iPods.

MP3 player USB to S/PDIF conver

I have acquired quite a few Creative MP3 players and sound cards over the years. One thing I really like about Creative MP3 players is the MP3 tracks are not wrapped. Why is this good? One reason I can give is that we are starting to see a lot of "USB Direct"? audio products. These allow simple plug/play of your plain USB mass storage devices or MP3 player flash dri'ves *provided* the tracks are MP3 tracks.A simple example .. this Philips AZ836 micro-boombox:?http://www.consumer.phili 
<br...questid=288824?The USB port works perfectly with every Creative MP3 player I've tried (MuVu TX, V00, N200 etc..).Some more recent DVD players also provide this "USB Direct" port. However, what I'd also like to do is connect my MP3 player to an amplifier that has a S/PDIF inputs (either digital coaxial or optical). Obviously I can connect the headphone output of the MP3 player to any line-in on the amplifier but I want to do it digitally from the MP3 player so .. Question:? Are there any portable? "digital converter" devices designed to convert USB data from MP3 flash players to S/PDIF digital or optical streams??

Thinking about this a bit more ... this is a bit more complicated. A "USB Direct" device is a USB host. So for this to really make sense, the "converter" would need to read the USB dri've, and allow the user to select a recognizable audio track (MP3 or WMA) and then play it out to the S/PDIF output of the converter ... So maybe what I really should have asked is:?Question2:? Are there any *portable* MP3 players (or for that matter portable CD-Audio/MP3 CD players) that provide an SPDIF output capability??

TS1367 Got a Riptunes MP3 player and put USB cord from mp3 player to MacBook Pro to install music and it immediately shut down my computer and it will not turn back on and wont charge now...never had a problem with computer before

Got a Riptunes MP3 player and put USB cord from MP3 player to MacBook Pro to transfer songs and my computer immediately shut down and won't power back up and won't charge now....what do I do!?

Take it in for a service diagnostic so you can determine if it's worth fixing or if you should buy a new one.

Can any usb mp3 player/phone connect to an ipad?

what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?

itoikenza wrote:
what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?
No.

How do I make bootable USB mp3 player/flash disk?

hi
i have a big problem. less than a month ago i have backed up my computer using the latest version of Norton ghost v10.0. i then burned the data on to a DVD and i kept it safe. today i encountered a problem i could not cess the internet on my laptop, nor uninstall/install a program, nor get access to help and support. therefore i got the backup DVD inserted it into the DVD drive i opened Norton ghost clicked recovery and then clicked recover my computer. i told it where to look for the backup and then started restore but i then ran into an error message which says the below:
cannot complete the restore of recovery point d:\Toshiba ghost image001.v2i
-Error EC8F178F: Cannot complete the restore of recovery point: D:\Toshiba ghost image001.v2i.
--Error EC8F03F1: Cannot open recovery point 'D:\Toshiba ghost image001.v2i'.
---Error EBAB03E9: Internal Application Error: Memory Access Violation c0000005: Application tried to read memory at 034bac3c.
i have another way of restoring the data this is by making a mp3 player or flash disk boot the computer but on the flash disk there will be the operating system. is there any way to make the flash disk bootable.
i would like to know this because if it boots up from the flash disk or mp3 i can then delete the contents on the HDD and restore the data.
and also when trying to restore it says a file or program is using the file its trying to restore.
can somebody help,
regards

Hello Samee
The best way to boot the unit in DOS mode is to use external floppy drive. This drive is not expensive and if your data are so important you can invest a few euros to buy it. Using start disk you will be able to boot into DOS mode and do what you want to do.
I also recommend you to contact Norton and see if they have some simply solution how to install created image.
With mp3 player you will not be able to boot up.

MP3 Player FX120/ Usb erro

Similar Messages

Maybe you are looking for