MP3 player not charg

My MP3 player is month old working great until I went on vacation for 2 days did not use it. I came back to charge it, showed it was charging, next day I went to use it and it said low battery, charged it again differant outlet same thing, anyone have any suggestions?

What player? Make sure to read the FAQ post.

Similar Messages

Can you download the music to any mp3 player (not an ipod)? If yes, how?

Can you download the music to any mp3 player (not an ipod)? If yes, how?

Not using itunes.
You can use the music on other music players that support the format that itunes uses.
Consult the manual for instructions on how to put music on the player.

Mp3 Player not showing?

I have a cheap mp3 player (not iPod) that is not showing anywhere when I plug it in. Prior to installing Lion, it showed up no problem (on desktop, in disk utility etc) even when using the keyboard usb port.
Any suggestions please?

It may not be compatible with Lion.
Check the manufacture website for Lion compatible updates.

Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

FM Radio in MP3 Player Not Work

The FM Radio Autoscan function of my newly bought 256MB MuVo TX FM MP3 player does not seem to be functioning properly.
During the st time I performed autoscanning, the player was only able to register a few radio channels. Channels like 93.3FM and 92.4FM were missing. Hence, I tried a second time. Again, some of the channels were missing after autoscanning was completed.
I brought the MP3 player with me while I travelled on the bus and tried listening to the few channels and realised that the channels which I could receive on my player depended on the region the bus was in. At some places, all the preset channels were available for listening. At certain areas, only 2 preset channels could be heard.
After I went back home, I decided to try my luck at the autoscanning again. This time, I was not able to get ANY channels registered on my player. I have tried umpteen times but to no avail.
Are the radio and autoscan functions of my player faulty?

fischeri,
That is normal for auto-scanning. Auto scanning depend greatly on the reciption of the radio signal. If the signal is not strong enough, the auto scanning will not lock and register the station and will continue to scroll to the next strongest available signal. Can you manually lock the preset station?
Jason

Simple mp3 player not working :( action script error

Hi Everyone!
I'm wondering if anyone can help with this problem:
I am currently designing a website and creating a simple mp3 player with an on / off function but doesn't appear to be working. I am getting this error:
1095: Syntax error: A string literal must be terminated before the line break.
1083: Syntax error: end of program is unexpected.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
I have uploaded a zip file containing the images and FLA file. I'm wondering if someone wouldn't mind taking a look for me and telling me how to fix this problem:
http://www.c-recordz.co.uk/download/mp3_player.zip
Thanks
Davies

Hi Davies,
On line 19 don't break the line, Flash will do it for you... other aspect that I would recomend is to not put the '$' on the variables. In AS2 variables don't need to be declared as such (although it's a good policy), instead of the '$' put the 'var' word, as you already have in those variables.
Greetings
Leo

MP3 player not playing as music is marked as 'Protected conte

Hi.
I am the happy owner of a Creative MuVo player. I have copied some music to the player, but not all tracks are played.
I believe its because some tracks have been marked as protected content (can be viewed by selecting properties).
All tracks have been ripped from my own (original) CD, so I should have the legal rights to copy to my MP3.
Some time ago a got a new laptop and copied my entire music library from the old one to the new one. It seems as though I only have troubles with tracks ripped on the old one.
Could someone please advise my how to remove the protection flag so I can use my MP3 player instead of ripping all my CD's again?
Thanks in advance.

allander,
The protection license might not have been transfer over to your new pc from the old one and unfortunately the protection can't be removed. Did you try transferring those audio files through Mediasource or Windows Media Player to the player as these protected files need such application for transfer.
Jason

Coby mp3 player not detected as mp3 player [SOLVED]

Hello,
I want to load music onto my wifes new mp3 player that I bought, it only mounts it as a drive. I can see the player on the desktop and in the filesystem. Rythmbox and Banshee do not detect it at all, please help I just want it to work.
Arch linux 64 bit, Enlightenment
Last edited by mich04 (2012-12-27 14:09:04)

ok,
I just realized banshee was closing unexpecdtly when ever I plugged in the mp3 player here is the out put from terminal.
[mily@oe ~]$ banshee
[Info 17:22:38.570] Running Banshee 2.6.0: [ArchLinux (linux-gnu, x86_64) @ 2012-11-06 13:27:11 UTC]
[Warn 17:22:39.961] Cannot connect to NetworkManager or Wicd - An available, working network connection will be assumed
[Warn 17:22:42.142] Caught an exception - GLib.GException: Icon 'process-working' not present in theme (in `gtk-sharp')
at Gtk.IconTheme.LoadIcon (System.String icon_name, Int32 size, IconLookupFlags flags) [0x00000] in <filename unknown>:0
at Banshee.Gui.Widgets.TaskStatusIcon..ctor () [0x00000] in <filename unknown>:0
[Warn 17:22:42.634] Caught an exception - System.ApplicationException: No support GNOME Settings Daemon could be reached. (in `Banshee.MultimediaKeys')
at Banshee.MultimediaKeys.MultimediaKeysService.Banshee.ServiceStack.IExtensionService.Initialize () [0x00000] in <filename unknown>:0
at Banshee.ServiceStack.ServiceManager.StartExtension (Mono.Addins.TypeExtensionNode node) [0x00000] in <filename unknown>:0
[Warn 17:22:42.634] Extension `Banshee.MultimediaKeys.MultimediaKeysService' not started: No support GNOME Settings Daemon could be reached.
[Info 17:22:43.360] Updating web proxy from GConf
[Warn 17:22:43.514] Caught an exception - System.ApplicationException: No support GNOME Settings Daemon could be reached. (in `Banshee.MultimediaKeys')
at Banshee.MultimediaKeys.MultimediaKeysService.Banshee.ServiceStack.IExtensionService.Initialize () [0x00000] in <filename unknown>:0
at Banshee.ServiceStack.ServiceManager.StartExtension (Mono.Addins.TypeExtensionNode node) [0x00000] in <filename unknown>:0
[Warn 17:22:43.515] Extension `Banshee.MultimediaKeys.MultimediaKeysService' not started: No support GNOME Settings Daemon could be reached.
[Info 17:22:43.522] All services are started 4.008088
[Info 17:22:43.620] Querying MusicBrainz for Disc Release (oyYWksf97YXfONUAjZx_QqpwDOQ-)
[Info 17:22:45.821] AmazonMP3 store redirect URL: http://integrated-services.banshee.fm/amz/redirect.do/
[Warn 17:22:46.788] Forcefully breaking out of RCS loop b/c change in total_width less than 1.0
[Info 17:22:46.970] nereid Client Started
[Info 17:22:47.267] Query finished (success: True, 3.646258 seconds)
[Info 17:22:47.394] GStreamer version 0.10.36.0, gapless: True, replaygain: False
[Info 17:22:47.824] AppleDeviceSource is ignoring unmounted volume Documents
System.ApplicationException: Could not find org.freedesktop.Avahi
at Mono.Zeroconf.Providers.AvahiDBus.DBusManager.Initialize () [0x00000] in <filename unknown>:0
at Mono.Zeroconf.Providers.AvahiDBus.ZeroconfProvider.Initialize () [0x00000] in <filename unknown>:0
at Mono.Zeroconf.Providers.ProviderFactory.GetProviders () [0x00000] in <filename unknown>:0
[Warn 17:22:48.324] Failed to start DAAP client - System.Exception: No Zeroconf providers could be found or initialized. Necessary daemon may not be running. (in `Mono.Zeroconf')
at Mono.Zeroconf.Providers.ProviderFactory.GetProviders () [0x00000] in <filename unknown>:0
at Mono.Zeroconf.Providers.ProviderFactory.get_DefaultProvider () [0x00000] in <filename unknown>:0
at Mono.Zeroconf.Providers.ProviderFactory.get_SelectedProvider () [0x00000] in <filename unknown>:0
at Mono.Zeroconf.ServiceBrowser..ctor () [0x00000] in <filename unknown>:0
at Daap.ServiceLocator.Start () [0x00000] in <filename unknown>:0
at Banshee.Daap.DaapService.ThreadedInitialize () [0x00000] in <filename unknown>:0
Stacktrace:
Native stacktrace:
Object reference not set to an instance of an objectSegmentation fault (core dumped)
[mily@oe ~]$

MP3 player not recognized in OSX 10.4.x

I just bought a new mp3 player and it's not being recognized by my mac. What can I do? The specs of the mp3 player are here: http://oracom.co.kr/english/product_870.html
Is there any way to have OSX recognize the device? It says that it's good for OSX up to 10.3.5. Would that be because of the FAT/FAT32 file structure?

Klaus1 wrote:
Does it not show on the desktop at all? Are you connecting it to USB2 on your Mac or by any chance by a USB1 socket for a mouse?
Actually searching through Google I've found a way to hook it up, and I can transfer my files. Thank you. My only issue now is that all of my songs come up with mirrored .files. I have files like "songname.mp3" and then a second one called ".songname.mp3" that show up on the mp3 player, but not in finder. Is this a result of copying my music over from the iTunes folder via finder? Is there any way to automatically have the songs copied over with iTunes similar to using an iPod? Or is that just an iPod-only feature?

Mp3 player not work

My son got his mp3 player for christmas and has been very pleased with it. However it is now coming up with the words ' file system error ' on the display. I have tried to format it but it is just not being recognised on my computer. When I plug it into the usb hub it says it has found a high speed usb device plugged into a non hi speed system device so it has obviously found it but then when I go into windows explorer to try and format it , I get the message please insert a disc into dri've F. I have been onto your website and looked into uninstalling the drivers and then trying to install them again, I get as far as device manager but then am not sure which usb hub relates to the player , Any ideas ?

Hi,
Are you using the Creative Formatter program? The original TX did not support formatting directly from Windows Explorer and you need to use this program. Upgrading the firmware adds this support (for FAT 6/FAT 32) but I'd take this one step at a time and get the unit working using this utility first.
John

Mp3 player not respond

I took my mp3 player off the charger, and now it won't respond. It is stuck on the opening screen and it says it is playing a song but there is no sound coming out. I can't get it to scroll through the different screens, and the only way I can get it to turn off is if the battery goes dead, or if I push the reset button, and when either of these happen after it comes back on the same screen appears.

Can you run a disk cleanup from rescue mode?

Mp3 player not recognized. (Vision: M 60

Hello.
I am using Win XP MCE. I just installed all the drivers that came with the CD. I had the MP3 player unplugged as instructed, and connected it at the point it asked me to. It is plugged into a port I know works, because it is the one I used for my old MP3 player.
Anyone know how to solve this issue?

Are you getting the following error message?
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message."
I've been getting this message for months and nothing seems to fix the issue.
I even tried
http://mycreativefansite.googlepages.com/myzenchecker_home.html
And their program said I was running the latest version of XP, but for some reason the drivers won't recognize.

Creative Zen Nano mp3 player not showing on ext monitor

I am having a problem getting an mp3 player to show in the finder when my powerbook is closed and I am working off an external monitor.
I have a Creative Zen Nano 512 mb which shows on the desktop of my powerbook when the lid is up. Once showing I can close the lid and it will still show on an external monitor. If I eject and plug it in again, it will not show. I can restart the powerbook but I cannot connect the mp3 player to a closed powerbook and get it to show up on the external monitor. I can only get it to show in the finder when the powerbook display is functional. It will show on both.
Anyone have info on this.
How can I get this MP3 player plugged into the USB port, to show on the desktop viewed on the external monitor when the powerbook is closed lib?
Thanks

Harmz,
I think you may get better info if you post on the Powerbook G4 12" Discussions. (I think you just hit the wrong button.)

Creative MuvoNX mp3 player not play

hi all
i have bought a Creative Muvo NX mp3 player of memory 256 MB , it was playing mp3 files for 2 months .
yesterday i copied some of my mp3 files to Creative Muvo NX mp3 player and
inserted the battery into the mp3 player and when i pressed the start button , the player is not playing and the power LED is not glowing
what could be the reasons for it ?
pls help me get around this problem
regards
Jagan

Jagan,
Unfortunately it does sound faulty. You can contact Customer Support to see if they can assist you:
Americas Customer Support
European Customer Support
Asia Customer Support
Cat

Mp3 player not recognised

I use a creative mp3 player. it would show on the desktop and in iTunes, but now doesn't. It shows in the USB list as connected but I cannot access it or click and drag songs onto it anymore. I have only done updates and nothing else.
How can I get the Mac to pick up the mp3 player again?

it doesn't show up in disk utility/repair .just the hard drives connected.
it only shows the creative nano plus in About this Mac , More Info ,USB devices .
will keep prodding,
THANKS TOM

MP3 player not charg

Similar Messages

Maybe you are looking for