MP3 player shuts down when i make recordi

I got my MuVo TX FM 52 MB last thursday and its so awesome. I havn't had any problems with the FM and voice recorders but yesterday I formated the player and now when i make a recording it powers off.

vikingdude89,
Try reloading the firmware for the player. The firmware are available from the download page.
Jason

Similar Messages

  • Blackberry Shuts Down when I make a phone call or access to the internet

    Please help someone, 
    I know there are similar question before. I took a look at them. but there was no solution. 
    just crossing my finger. 
    my blackberry is...
    Curve 9360
    3G wifi
    7.1 Bundle 2102 ( v 7.1.0.746  Platform 9.6.0.112)
    Hope it is enough info on my cellphone. 
    Everytime I make a phone call or use the internet, it shuts down immediately. when I received the phone call as well. 
    and I need to charge it first and then I can turn on again.
    It is not buttery consumption since the buttery sign shows almost full when I turn on again. 
    I would like to fix and use this phone at least another year. It has been 2 and half years. should work properly more!
    Thank you in advance!

    Hi everyone who gave me solutions,
    I appreciate all of your help and Im so sorry for late update. 
    I tried them, but did not work unfortunately. so I bought a new battery for $9 and now it's working very well like a new phone. 
    I will try to charge battery when it's almost gone.(not all the time) and try not to use phone while it's charging.
    I believe that it lengthens cell/battery life. 
    Thank you again for your help. 

  • How to disable auto shut down when doing line-in recordi

    I am using Zen V Plus 6gb to do li've line-in mic recording.
    I experience creation of a few tacks when the recording ends.
    When I asked Creative Tech, they said it is auto shut down when the voice recorded falls below audible level. Can I disable this?

    If I got you right, it interrupts the recording when a period of seconds no signal more loud than a certain level is
    on the line-in source? Right? Normally you could aplify anything, even white noise, but I don't get the point.
    Are there any songs that have longer interruptions than 5 seconds according to this cd norm?

  • IPhone shuts down when phoning

    Hello,
    when the battery goes to about 50%, my iPhone shuts down when I make a call (or receive) one. When I turn it on again (without charger) and try to make another call, it shuts down again There is no low battery warning!
    But I can use it for hours surfing the internet (WIFI or EDGE), playing music etc. I also tried to use (internet & music) it, till it shuts down and charge it for at least 6 hours. This doesn't help as well.
    Can I do anything else or do I have to replace it?
    Firmware is the latest 1.1.1
    Best regards
    René
    Message was edited by: Rene Scrubei

    Sorry to hear you are having so much trouble.
    2 things to do before you seek service.
    1. Reboot the iPhone on your own. Hold down the button on the top and wait until you get the red bar telling you to slide to turn it off. Power down, reboot and see if the problem persists.
    2. If that doesn't work, Reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    3. Final option is to restore the iPhone in iTunes. You'll lose some data, but if you back up first, you'll obviously be ok.
    An Apple genius will ask if you have tried these steps before proceeding. Good luck.

  • IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

    I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

    The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems.  Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB.  But I would go for 8 and see how it does.

  • Iphone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....tried usb to computer and directo to wall socket. help?

    phone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....either via usb to computer and direct to wall socket. Any suggestions...other than heading off to the genius bar tomorrow?

    Well, the sleep/wake button is also the power button. If you cannot use it to turn on, then you cannot use it to perform a reset by holding it and the home button together until you see the Apple logo.Those are the only two ways to turn the device on. You can try letting the battery go completely dead and then trying to plug it in. After it has charged for 20-30 minutes, the device may come back on. But, without the sleep/wake button, there is no other way to turn the device on or off.

  • IMac Shutting Down when DVD player is in use

    So, I know a lot of folks have been mentioning the new iMacs heating up and shutting down. I'm managing my heat issues okay to this point, and I use Photoshop, Illustrator, and InDesign every day.
    But - the thing keeps shutting down when I try to play a DVD!
    Anyone? This one has me stumped.

    You are connecting the mini display port on the 2010 iMac to WHAT to try and get TDM to work?

  • HT1338 I have Creator DVD Maker and it shuts down when I add media.

    I have an imac /mountain lion        I have DVD-Creator by Wondershare 3.6.2 and I shuts down when I add media.

    Hi InternetHogger,
    Welcome to the Apple Support Communities!
    I know that situations where you cannot boot your iPad and cannot charge your iPad can be very frustrating. In this situation, I would recommend using the attached article as a reference for troubleshooting. 
    iOS: Not responding or does not turn on - Apple Support
    Cheers,
    Joe 

  • QuickTime Player Shut Down Automatically!!!!!!?

    Recently I purchased the new iMac 27 inch late 2012 with OS X 10.8.4.
    Later on, I learned that there is something wrong with QuickTime Player.
    Every time when I tried to play a MP4 video, QuickTime Player shut down automatically.
    I also cannot create new video, audio, and screen recording.
    When I ever tried it, it again shut down by itself.
    I saved the error message in TextEdit, and shared it here.
    Feel free to take a look, and see if anyone know how to fix it.
    Thank you~

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I-pod shuts down when browsing album covers

    After updating the i-pod touch to the new Op System 5 the player will shut down when I browse the album covers (holding the i-pod horizontal). It will work for about 5 covers but then shuts down. I did a reset but did not help
    Anybody who is familiar with the problem?

    hiya!
    within 30 seconds or so my computer shuts down and starts up again.
    are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
    love, b

  • N200 shuts down when attempting to encode tra

    I've got a Muvo N200 with which I have a problem.
    When I try to encode tracks using the line-in it just shuts down when I try to choose that option. I go into the menu, use the jog wheel to scroll to the encoding option and the I press the jog wheel. Result: the player shuts off. I tried just scrolling to the option and pressing the play/pause button, but then it just exits the menu.
    I have not upgraded the firmware on the player since I bought it, so it's fresh out of the box.
    Anyone who's got a solution? Will upgrading the firmware do the trick?

    Where can I find that firmware version? I can only find .6.02. And also, I tried updating to that firmware, but I don't know if it actually had any effect. When I ran that firmware update, the only way I got the New Hardware Guide-dialog to come up was if I removed the battery from the unit before I did the hold-play-button-and-then-connect-to-PC routine. Then it ran the Player Recovery stuff and then I unplugged it and it turned on just fine. However none of the tracks I had on it previously were delted. They were all intact after the upgrade. So the question is if the upgrade actually took effect.
    Anyway, the encode option doesn't work now either. The reason I want to use this option is I want to be able to use the player for recording interviews using an external mic.
    Also, in Explorer in WinXP the Creative Media Explorer says that the player isn't connected, while it obviously is as it shows up as a removable disk.
    Dodgy player, this.

  • My Satellite laptop (A305) shuts down when run on the AC charger/adapter

    The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
    It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
    The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
    One interesting thing is that the _computer runs fine on AC when in safe mode_.
    I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
    It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
    This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
    I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
    Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

  • IMac shuts down when using Safari 2.0.4

    My iMac shuts down when I visit certain websites such as Pogo or video sites. Took it to the Apple store and of course the problem wouldn't replicate there. They kept it to check out the scripts and logs to see if they could find a problem - without success; although they did suggest my house is haunted. Brought it home and it quit again.
    We thought perhaps we were getting interference from other wireless devices and unplugged our cordless phone which worked for a day. The computer always turns back on so its more of an annoyance than a real problem, but I'm baffled.
    It also happened once when I was downloading from the iTunes store, but is most prevalent with Safari.
    We have wireless internet connected via ethernet to an Airport Express.
    Any ideas? Thanks.
    iMac G5 Mac OS X (10.4.10)

    Hi Barry -
    Yes I do live near a ghost town (kinda) - Virginia City, NV. And I did tell any unwanted visitors to leave.
    Actually, in the last year, they have replaced the Super drive, power supply, inverter and logic board. The only reason I'm not thinking power issues is that it only happens when I'm in Safari or iTunes. I would use Firefox except I've got java issues with that. I can (and do) use the machine for other things all day long without problems. I can use Safari all day long as long as I'm not playing on Pogo or certain video sites. Maybe Pogo is haunted?
    It also doesn't happen on my husband's iMac on the other side of the house. Is there something that could cause enough interference to actually make the machine shut down? Oh, the antennae for the satellite TV and internet are on the roof directly above me, if that would have anything to do with it.
    Thanks for your help.

  • Battery doesn't charge AND frequent shut down when only on AC power

    Hello all,
    I've spent some time browsing and searching this forum to avoid asking a question that has already been answered but I haven't seen a complete answer to this situation so here goes.
    I have a Lenovo 3000 N100 model 0768DKU.  Battery (P/N 92P1185) started not charging/not holding a change about 6-8 months ago AND the laptop now abruptly shuts down even when on AC power.  From the forum I found out about the 18 month battery replacement policy but I'm just a few months past the 18 months so out of luck there.  Normally I would just buy a new battery but the last few months I've been getting very frequent shut downs when the laptop is exclusively on AC power even with the battery removed!  This has kept me from buying a battery because the laptop won't stay on even when it's plugged into the wall then how will a battery help? 
    This has really thrown me for a loop since the laptop may run 30 minutes then it's dead like you pulled the power cord.  Turn it back on maybe 10 minutes then dead, or 5 minutes then dead repeat over and over.
    Steps I've taken since browsing the forums:
    Virus scans/spyware are clean
    Used compressed air on the fan vent to remove a little dust, opened up and sprayed out dust nothing major.
    Speedfan is reporting cpu temperatures of 65C to 69C at 99% idle.
    Reseated memory
    Questions:
    Would a new battery potentially solve this problem?  I'm not sure how since it shuts down even with the battery removed and only the power cord plugged in.
    Bad AC adapter?
    Thermal problem?  It looks like the cpu is still below temperature ranges based on Intel but it sure seem like a thermal problem to me the way it shuts down.  I'm trying some new thermal grease tonight but not sure if that will realy make a difference.
    Any suggestions, I'd hate for it to be motherboard, etc.
    Sorry if this was answered elsewhere I've seen all the battery posts but not how the battery would address the fact the laptop shuts down even when on AC power with or without the battery installed. 
    Thanks,
    Chad 

    Hard reset didn't work for me either, thanks for the tip it was worth a shot.
    Thermal paste kept temps lower around 45C still suddenly shut off like usual while on AC power.  3, 5, minutes, etc.  Doesn't appear to be thermal.
    Could the "bad" battery somehow be messing up the power circuit and cutting off.  Looks like the battery problem with these units is huge wish I'd been looking earlier since I was within the extended 18 month period at the time.  Just want to hear that someone bought a battery and it fixed the problem....

  • Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for months with no problems.

    Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for

  • How do I create a UI for SQL server back end using Dreamweaver wizard

    Hi, I want to test a database driven application which is using SQL server as back end. To test that I want to create web UI using C#. As I remember in dreamweaver there is a wizard to do it easily. But I can not find it now. Please let me how to do

  • Is it possible to boot from a shared dvd or disk image remotely

    Is it possible to boot from a shared dvd or disk image remotely without using netboot for install or utility?

  • Security integration

    I am developing a shockwave[.dcr] for my web site which will post data to a URL in AES encrypted format using public key which gets decrypted at server side [URL] using the private key. Is it possible to do in Lingo? If yes please let me know somethi

  • RH Server 9 compatibility with Windows Server 2008 SP2/SQL Server

    Our tech support people are preparing for a first install of RH Server 9. They have asked me to find out whether there is a recent patch that would enable it to work with Windows Server 2008 SP2 64 bit and MS SQL Server 2008. If there is not yet a pa

  • Is the Powerbook G4 still a good day to day computer?

    Hi, I have a question for fellow Mac users. I have a 2012 Macbook Pro. I take it to high school, and find people looking at it (they could be admiring it), but Im worried about theft and damage. I have the oppertunity to get my hands on a used 2005 1