MP3 player wont work on vista

Hey everyone,
Please someone help me...
I have a Vista 32bit OS and I have a ZEN Micro 6GB Mp3 PLayer!!
I cannot for the life of me get them to work with each other!
I have tried everything... the disc that came with the mp3 player does not work on vista.
I have tried downloading all the drivers on this website such as..
CMS5_PCAPP_LB_5_0_38
CMS5_BRNR_PCAPP_LB_0_3
CMS5_MTP_PCAPP_LB_5_00_36
ZCST_ PCAPP_LB_2_0_0
and neither of them will recognise that my media player is connected to the computer even though vista recognises the media player and tries to automatically install download dri'ves for it's
What should I do

Hi Eddy,
Thanks for such a quick reply.. I have an XP laptop that is unable to connect through to the internet and does not have the CD/DVD player working. Am I able to download the firmware through vista transfer it to my laptop via USB and then upgrade the MP3 player that way? Or do I need to have other installations for the Micro player available on the laptop already. Or can I just upgrade the firmware on its own?
Sorry about the questions but I'm just asking without wasting anymore time on my micro

Similar Messages

Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

I can't get the mp3 player to work

I can't get the mp3 player to work after I paid for it

I keep getting a triangle with and exclamation mark no matter what I rename my mp3 file to. I put the mp3 file into my muse folder desktop, any hints?

Installed Windows 8.1 on my HP Pavillion g7 & DVD player wont work

Hi All , I Installed Windows 8.1 on my HP Pavillion g7 and now my DVD player wont work for some reason, Any thoughts? I tried troubleshooting and it detects that there is a problem with the driverfor USB-IF xHCI USB Host Controller.
Thx,
Gslice
This question was solved.
View Solution.

Hi:
I would try each of resolution steps 2, 3, 4, and 5 at the link below.
One of them may work.
http://support.microsoft.com/kb/314060

Does any one know of an MP3 player that works on Phones?

I'm looking for an MP3 player that works on mobile phones, multi-track player that lists out the songs. I've been using widgets from places like reverb nation, sound cloud, but I can't get them those show up on mobile phones.
Anyone have any suggestions?

These are playlist players which use flash.
To get these to work on iOS devices they need to fallback to HTML5.
The problem is that HTML5 has not been developed enough and there is no cross browser standard.
The JW player attempts to overcome this by using two different versions of the player skin - one for HTML5 and the other for flash.
The one shown on this page uses flash with fallback to HTML5 but I have no idea if it works on the iPhone...
http://www.iwebformusicians.com/Website-Music-Players/XML-Playlist.html
A test version using HTML5 with fallback to flash works in Safari but not with Chrome or Firefox.

Flash player wont work at all!

no matter what steps I do my flasher player wont work! It works for 1 day then it goes back to displaying a green screen for all videos on the net and wont play any of my videos on my computer uploaded from my phone. I have the lastest version but this still happens.

Read Before Posting: How To Get A Useful Answer To Your Question

Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

Will any Creative MP3/Video Players Work With Vista Ultimate/Yahoo Music Out of the B

i've had a heck of a time getting my zen touch to work with my new vista ultimate dell pc, almost ready to give up. why i'm even thinking of getting another creative device given the above i'm not sure, but if i was, do any of the current devices (20gb or greater, mostly for music but want video capabilities) work with vista and yahoo music correctly and without a huge amount of heartache? and if not, any other devices i should look at? i really like the yahoo music service so don't want to go the apple route. thx!

iTunes is only intended for iPods and iPhones. In recent releases, Apple has instituted changes that prevent it from being used with other devices, e.g. release 8.2.1 deliberately broke the ability to sync with the Palm Pre.
Since you will be using multiple platforms, make sure that all music that your rip or purchase is in MP3 format. Then your music can be used in iTunes, Creative, or any other player or program, without conversion or compatibility problems.
Per the problem with Zen and Vista, you may wish to try the question on a Zen discussion.

Getting my mp3 player to work with rmmod ehci-hcd

Dear all,
I have a sansa fuze mp3 player. It can be configured to be in either MTP or MSC mode;
I'm using the second, meaning that the computer should see it as a simple mass
storage device. I remember using that a couple of years ago with Debian and I'd simply
plug it in and it would work.
Now I have the following problem: when I plug it in, I cannot see it with fdisk -l:
[jorge@flamingo ~]$ sudo fdisk -l
Password:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe8000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 40965749 20482843+ 7 HPFS/NTFS/exFAT
/dev/sda2 40965750 45062324 2048287+ 7 HPFS/NTFS/exFAT
/dev/sda3 45062325 45271169 104422+ 83 Linux
/dev/sda4 45271170 234436544 94582687+ 5 Extended
/dev/sda5 45271233 68131664 11430216 83 Linux
/dev/sda6 68131728 72180044 2024158+ 82 Linux swap / Solaris
/dev/sda7 72180108 234436544 81128218+ 83 Linux
[jorge@flamingo ~]$
This is what I get in dmesg:
[jorge@flamingo ~]$ dmesg | tail
[ 9906.598074] wlan0: associate with 00:18:e7:ee:75:e5 (try 1)
[ 9906.602459] wlan0: RX AssocResp from 00:18:e7:ee:75:e5 (capab=0x431 status=0 aid=1)
[ 9906.602463] wlan0: associated
[ 9906.604145] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9917.055720] wlan0: no IPv6 routers present
[10399.946003] hub 7-0:1.0: unable to enumerate USB device on port 3
[11117.825661] hub 7-0:1.0: unable to enumerate USB device on port 3
[11119.605622] usb 7-3: new high speed USB device number 14 using ehci_hcd
[11119.659249] hub 7-0:1.0: unable to enumerate USB device on port 3
[11149.949776] usb 7-4: USB disconnect, device number 10
[jorge@flamingo ~]$
However, if I plug it out, then do "rmmod ehci-hcd" and plug it back again, I get it to
work:
[jorge@flamingo ~]$ sudo rmmod ehci-hcd
[jorge@flamingo ~]$ sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe8000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 40965749 20482843+ 7 HPFS/NTFS/exFAT
/dev/sda2 40965750 45062324 2048287+ 7 HPFS/NTFS/exFAT
/dev/sda3 45062325 45271169 104422+ 83 Linux
/dev/sda4 45271170 234436544 94582687+ 5 Extended
/dev/sda5 45271233 68131664 11430216 83 Linux
/dev/sda6 68131728 72180044 2024158+ 82 Linux swap / Solaris
/dev/sda7 72180108 234436544 81128218+ 83 Linux
Disk /dev/sdb: 3933 MB, 3933732864 bytes
122 heads, 62 sectors/track, 1015 cylinders, total 7683072 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6f20736b
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdb1 ? 778135908 1919645538 570754815+ 72 Unknown
/dev/sdb2 ? 168689522 2104717761 968014120 65 Novell Netware 386
/dev/sdb3 ? 1869881465 3805909656 968014096 79 Unknown
/dev/sdb4 ? 2885681152 2885736650 27749+ d Unknown
Partition table entries are not in disk order
[jorge@flamingo ~]$
My problems with this solution are:
1. It's a little bit inconvenient to do this everytime
2. The first time that I did that I had an external drive plugged in and it got a little bit
screwed up.. Had to run a disk check and fix some errors.. So I'm a little bit cautious
about doing it again.
Could you please enlighten me as of:
1. Why do I need to do the rmmod thing to get my sansa player recognized?
2. Is there a way to overcome this procedure?
Thanks a lot in advance..
Last edited by geo909 (2011-10-02 03:20:03)

To work in FF and IE, you need to have an <object> tag and an <embed> tag. Note: the embed tag was never accepted by the W3C web standards but it works in browsers that require it.
So your code should resemble this:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="366" height="56">
<param name="movie" value="Player-skin.swf">
<param name="quality" value="high">
<embed src="Player-skin.swf" quality="high" type="application/x-shockwave-flash" width="366" height="56"> </embed>
</object>
If you need a small flash audio player that works in all browsers consider the following links
Flash Music Player -
http://www.premiumbeat.com/flash_resources/free_flash_music_player/
MP3 Player
http://flash-mp3-player.net/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Get Flash Player to work under Vista

Using Internet Explorer, I am trying to get Flash Player 10 to work under Vista 32 bit. When I go to youtube.com, their greeting says "Hello, you either have JaveScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player." Looking at the 'Programs and features' on the Control Panel, it shows 'Adobe Flash Player 10 activeX' is installed. In the Internet options, the security level is Medium-High. I tried to change this to medium but the sytem keeps reverting to Medium-High and in the scripting area, Active Scripting is set to enable. Can someone please tell me what I need do to get Flash player to work on my system.

Anyone here get an answer yet? Suddenly I'm getting those same messages that I either don't have javascript enabled (I do) or I need to get the latest version of Flash Player. But the latest version isn't for Windows 64. So what am I supposed to do, and what happened to cause this?

Getting mp3 player to work in Firefox

Hello
I need to embed some sound files in a web site and when I use the straightforward media plugin option the media player works fine in IE with a slimline control bar (as desired) however it does not work in a Firefox browser.
If I change the player type to x-mplayer 2 it does work but the control bar is bigger and not customizable.
Is there some other player I can specify that will give me a slim control bar (or at least customizable) and will work in both FF and IE?
I have found no solution after browsing the internet and would be grateful for your suggestions.
Is using Flash going to help in any way?
Many thanks
Wadyaro
<embed src="mysong.mp3" width="32" height="90"></embed>   DOES NOT WORK IN FF
<embed src="mysong.mp3" type= "application/x-mplayer2" width="32" height="90"></embed>   WORKS IN FF but undesirable control bar

To work in FF and IE, you need to have an <object> tag and an <embed> tag. Note: the embed tag was never accepted by the W3C web standards but it works in browsers that require it.
So your code should resemble this:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="366" height="56">
<param name="movie" value="Player-skin.swf">
<param name="quality" value="high">
<embed src="Player-skin.swf" quality="high" type="application/x-shockwave-flash"   width="366" height="56">   </embed>
</object>
If you need a small flash audio player that works in all browsers consider the following links
Flash Music Player -
http://www.premiumbeat.com/flash_resources/free_flash_music_player/
MP3 Player
http://flash-mp3-player.net/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Simple mp3 player not working :( action script error

Hi Everyone!
I'm wondering if anyone can help with this problem:
I am currently designing a website and creating a simple mp3 player with an on / off function but doesn't appear to be working. I am getting this error:
1095: Syntax error: A string literal must be terminated before the line break.
1083: Syntax error: end of program is unexpected.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
1084: Syntax error: expecting rightparen before end of program.
I have uploaded a zip file containing the images and FLA file. I'm wondering if someone wouldn't mind taking a look for me and telling me how to fix this problem:
http://www.c-recordz.co.uk/download/mp3_player.zip
Thanks
Davies

Hi Davies,
On line 19 don't break the line, Flash will do it for you... other aspect that I would recomend is to not put the '$' on the variables. In AS2 variables don't need to be declared as such (although it's a good policy), instead of the '$' put the 'var' word, as you already have in those variables.
Greetings
Leo

Flash Player not working with Vista in Firefox

I try to install Flash Player and Firefox allows me to download it, but I have no idea where or if it is saved. The only place that I can see it is in the download folder. Will Flash Player 10 work on my computer since I have Vista? Help please!!

When you download anything, Firefox will give you two pop-ups
Click on 'Save File' here. Next you will be asked where to save the file to
Navigate to the location where you want to save the file (e.g. My Download Files, or Desktop), and click 'Save'.
When the download is complete, exit Firefox, then run the downloaded file from where you saved it.

Rebooted computer now player wont work

Well... I have an 8GB ZEN Mozaic. It's been working great until today when I ran into my very first problem.
I had to reformat my computer. Now the computer isn't recognizing the player when I plug it in.
All of my music is on it and it still works fine. I can also charge via the USB Connection to the computer.
But I can't add music! :smileysurprised:

I have tried updating as much as i know i can...
When it first connects i get a popup in my lower right corner of the screen saying that the device can perform faster if it's connected to a USB 2.0 port or something...
besides that it doesn't say anything about the player.
i tried the "MP3 Player Recovery Tool" and it acknowledged that it was a mozaic but then it says "Your player is not connected, please connect your player."
that's as far as i'm getting

Mp3 player not work

My son got his mp3 player for christmas and has been very pleased with it. However it is now coming up with the words ' file system error ' on the display. I have tried to format it but it is just not being recognised on my computer. When I plug it into the usb hub it says it has found a high speed usb device plugged into a non hi speed system device so it has obviously found it but then when I go into windows explorer to try and format it , I get the message please insert a disc into dri've F. I have been onto your website and looked into uninstalling the drivers and then trying to install them again, I get as far as device manager but then am not sure which usb hub relates to the player , Any ideas ?

Hi,
Are you using the Creative Formatter program? The original TX did not support formatting directly from Windows Explorer and you need to use this program. Upgrading the firmware adds this support (for FAT 6/FAT 32) but I'd take this one step at a time and get the unit working using this utility first.
John

MP3 player wont work on vista

Similar Messages

Maybe you are looking for