Mp3 players t

can any creative mp3 player read greek characters for the tags? which can? is there a way that i can make them able to read?

i do not have a mp3 player yet, i would like to buy one but i would like it to support greek charachters in the title and the tags and because greek are not usually supported internationally i would like to be sure if it supports greek chars and just go and buy it. specifically i believe zen sleek is the one i really liked so if anyone can help please let me know..

Similar Messages

  • Notes, grumblings and Questions on MP3-players in gene

    . A failing of (as far as I know)
    any MP3 recorder (if an MP3 player can record MP3s, I call it an MP3 recorder)
    are all those missing editing options available on MiniDisk: divide, combine, name and move tracks.
    Since fragmenting is of hardly any importance on flash-memory, I really don't see why they don't offer it. Unless someone knows one that does?
    2.Q: How good is the quality of this "direct MP3 encoding" compared to software encoders like LAME?
    I suppose it's lower ('cause of the far lower computing power and 'cause energy consumption is a FAR greater issue than on home PCs)
    but just how much lower is it's
    Asked differently: At what bitrate do you have to "direct encode" to achieve approx. the same quality as 80kbs CBR via LAME?
    3. "OLEDs are fascinating and are rapidly evolving, but have currently (July 2005) only a life span of 0000-5000 hours or 2-5 years".
    (Translated) statement from reichelt-elektronik. So, don't buy an OLED-device yet if you want something really long-lasting.
    4.Equalizer: Even on a HiFi stereo system, I'd consider it more of a gimmick (unless one doesn't have a PC - then it can be useful).
    If I want a song to have a stronger bass or whatever (which I never did, so far),
    then I'd use an audio editing software so the song always sounds the way I prefer it, independently from the playback device.
    On a portable player, this function is just a nuisance, since I have to pay attention that it is 'not acti've' or 'normal'.
    In addition, often a button is wasted/reserved for this function that could be put to better use.
    [So, plea for opensource firmware here that'll let me reprogram such a button. Or alternati'vely, several different firmwares by Creative that cater to different types of customers (like me).].
    Far more use than an equalizer, though propably more difficult to implement, would be a
    5. Volume Compressor: (A function that narrows the volume range of a song, for example from 2dB-60dB to 55dB-60dB.)
    Of course, your average pop song is already heavily compressed,
    but if you're listening to some opera or other classical music, it would be great if one could increase compression when there is (a lot of) ambient noise,
    so one can still hear quiet passages without going deaf on the loud ones.
    Q:I've read that some players have a 'Smart Volume' function. Is that a compressor?
    6. Who thinks that Artist-Album-Title is a great sequence for an MP3-player?
    Maybe I'm a weird guy, but I've never thought "Now, I wanna hear Madonna." or "Now, I wanna hear ABBA."
    Instead, I think like "Now, I wanna hear 'Goodnight moon' " (from whoever) or "Now, 'Music' "(from Madonna) or "Now, 'The winner takes it all' " (from ABBA).
    So, to me, the title is by far the Nr. criterion. What do I care who's singing it's And though with pop songs, one often can't help knowing, I've got lots of folklore, oldies and more extraordinary stuff where the Artist(s) and Albums are "Unknown" to me.
    What if you want to play a particular song? You don't just have to know who the Artist is and in what Album, but also what track number the song has, because on average, your player won't be able to display more than 'Artist' and part of the 'Album' name, unless each one is on a separate line, which usually isn't the case. (I know it's scrolling, but that takes time, and the longer the names, the more. Prelistening is usually faster).
    So, even to those who know 'Artist' and 'Album', the display isn't of much use since there can be dozens of songs in a particular album.
    [Again, plea for opensource firmware that'll let me change the display sequence, or many different firmware versions by Creative .].
    Of course, I can still have my sequence by saving the track title in the 'Artist' column, but, well... I'm not very fond of the idea!

    .) Well, most mp3 players are not dedicated recorders like MiniDiscs were intended to be, namely why they don't commonly come with this functionality.
    2.) Guess it depends on the chipset used for the direct encoding I would imagine. I would think it differs from model to model.
    3.) Most people won't keep an mp3 player for that long in my opinion. I have had 4 mp3 players in the span of about 3 years. Not to say they've all broken (only one has in fact), but I am a fan of new technology. As are most people. I would think the majority of people have no real care for this figure.
    4.) Most people do use an equaliser. It's not a gimmick. It can instantly give a boost to a song when/if it is necessary. I don't personally use one, but it gives people the simplicity of using their player to implement certain presets without having to have any other technical know-how. Most players could do with some kind of memory system, where it remembers what EQ setting you used for a specific track, but it's not 00% necessary.
    Also, I've never had a player with a dedicated EQ hardware button. Not that I've wanted one. There are players with configurable buttons though. I am pretty sure iRi'ver players and Cowan's iAudio range have players with at least one configurable button.
    5.) No player I know has what you request. Smart Volume also generally is an overall way of making a track seem a different volume, it doesn't analyse separate parts. You could probably achieve what you wanted by running your mp3's through something like mp3gain.
    6.) My Creative Zen Sleek let you view by :
    Album > Track
    Artist > Album > Track
    Artist > All Tracks
    Genre > Artist > Album > Track
    I can even go into "All Tracks" and use the find feature to grab a specific track if I need to. Isn't this more than enough to accomodate the average person?

  • Latest MediaSource Plugins for various Creative MP3 Players are now available for downl

    Just went to the product support site. Guess what? The latest MediaSource plugins for the various Creative MP3 Players are now available for download. I am sure the latest plugins should have fixed several problems.
    Don't forget to download the latest Creative MediaSource v3.30.2 too. Install the latest Creative MediaSource first before you install the MediaSource Plugins of your respecti've MP3 Players.
    Note: According to the download site, the latest MediaSource plugins require you to have at least v3.20.57 of Creative MediaSource.

    Thanks micromouse
    ... but there's no new plugin for the original Jukebox
    I've always had trouble connecting to MediaSource with my JB and was hoping for a new plugin to sort all my problems.
    PB

  • Creative MP3 Players and Car Au

    Hello,
    I'm a newbie and I don't know a lot about MP3 players so I hope you can help me out. I have a brand new Kenwood car audio with an USB cable to plug your MP3 player in. My friend's Samsung MP3 player doesn't work, after some research I find out that the MP3 player has to be an MTP one to work with the car audio. Now my question is: are all Creative MP3 players MTP maschines and do I have to make a software update or what ever to "make them be" a MTP player?
    Thanks a lot for any support!

    morrissey wrote:
    Hello,
    I'm a newbie and I don't know a lot about MP3 players so I hope you can help me out. I have a brand new Kenwood car audio with an USB cable to plug your MP3 player in. My friend's Samsung MP3 player doesn't work, after some research I find out that the MP3 player has to be an MTP one to work with the car audio. Now my question is: are all Creative MP3 players MTP maschines and do I have to make a software update or what ever to "make them be" a MTP player?
    Thanks a lot for any support!
    Are you sure about this? Which Kenwood is it exactly? The info I've seen on the Kenwoods say that the USB device must be MSC (not MTP).
    Perhaps your friend's Samsung is MTP, and that's why it didn't work.

  • Creative Mp3 Players MTP Problem Solution

    Hi,because of the firmware and windows problems,if you have a mp3 player with a firmware that doesn't support MTP problem,sometimes even if you reformat your computer,you can get "player not connected" error. To solve this you must install MTP supporting firmware on your mp3 player,but if you don't want to upgrade your firmware (because of being afraid of stucking in the recovery mode,some other reasons)there is some other solutions to solve this problem.
    Editing registry keys,and some other patches did nothing to solve my problem.So I deleted all Creative Drivers and programs from Add/Remove Programs,and I deleted Windows Media Player 0 and installed Windows Media Player 9,than I installed everything from my mp3 player's cd (media source,nomad explorer,device drivers,etc.) and I downloaded and installed new device driver (version 2...) from creative web site. I restarted my computer,and my problem is completely solved. Try it...

    morrissey wrote:
    Hello,
    I'm a newbie and I don't know a lot about MP3 players so I hope you can help me out. I have a brand new Kenwood car audio with an USB cable to plug your MP3 player in. My friend's Samsung MP3 player doesn't work, after some research I find out that the MP3 player has to be an MTP one to work with the car audio. Now my question is: are all Creative MP3 players MTP maschines and do I have to make a software update or what ever to "make them be" a MTP player?
    Thanks a lot for any support!
    Are you sure about this? Which Kenwood is it exactly? The info I've seen on the Kenwoods say that the USB device must be MSC (not MTP).
    Perhaps your friend's Samsung is MTP, and that's why it didn't work.

  • Is creative meant for mp3 players

    ok now since iv read over <FONT color=#66cc00 size=5>00'S of forums regarding firmware and sound probs im thinkg that maybe <FONT color=#ff3300 size=5>creative isnt made for mp3 players!!! THERE CS SUCKS BAD! THERE FIRMWARE IS VERYYYYYYYYYYYYYYY POOR!! WHY BOTHER WITH THEIR MP3 PLAYERS? <FONT color=#3333ff size=4>there ignoring people's comments and questions i think that either theyshould freakin start crackin on better firmware or they are gonna lose major customers because of there lack of work on them. please comment on this and express your feelings ,without anybad language, about creative cs and problems thank youMessage Edited by kickenchicken on 07-0-2006 04:03 PM

    Closing this thread, if you have a specific complaint or question, do feel free to post it up, but this is a rant and will not go anywhere producti've. If you have a complaint about your product, I'd also recommend forwarding it to Customer Support, to see if they can assist or at least log your complaint or problem.
    This forum is not intended for direct support, it is for user interaction, as the announcement at the top of each board details. Please bear this in mind in future aswell, as it means you are not guaranteed a response to your posts (Customer Support should be contacted if you need a direct response).
    Cat

  • How to rip DVD to Sansa/iPod/iPhone/PSP/Zune and other MP4 and MP3 Players

    This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, and other video/audio formats supported by popular mp4 and mp3 players by using DVD Ripper .
    Step 1: Install and run DVD Ripper
    Step 2: Import DVD.
    Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.
    Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
    Step 3: Video settings.
    Select the output video format you want from the “Profile” drop-down list.
    Tips:
    1: You can also select Audio Track and Subtitle from their respectively drop-down list.
    2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button. As default the captured image will be saved at:
    C:\Documents and Settings\Administrator\My Documents\Aiseesoft Studio\Snapshot
    3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)
    4: You can click the “Settings” button to set your video parameters.
    In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
    In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
    when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
    Step 4: Start conversion
    Click the “Start” button to start your conversion and in a short while it will be finished.
    Step 5: Click “Open” button to open your output destination file.
    More tips:
    1: Trim Movie
    If you just want to convert a clip from your DVD movie, you can click the “Trim” button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
    After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
    2. Movie Effect
    If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
    3. Video Crop
    With Aiseesoft DVD Ripper you can remove the black edges around your movie video by checking the “Crop” option, so you can watch your movie on your portable players in full screen.
    There are three methods available to crop your video:
    Method 1: Crop by selecting a crop mode
    Select a crop mode in the crop mode drop-down list and click OK to save the crop. There are three pre-set crop modes
    for your choice: No Crop, Cut off top and bottom black edges, Cut off top black edge.
    Method 2: Crop by adjusting the crop frame
    The crop frame is the dashed line around the movie video. There are four adjustment lines on the crop frame. Each line allows you to crop the movie video from a different position.
    To crop your movie video, you can just move your mouse cursor to an adjustment box and drag the crop frame.
    Method 3: Crop by setting the crop values
    There are four crop values on the lower left part of the crop window: Up, Down, Left and right. You can set each value to crop your movie video, and the crop frame will move accordingly.
    Before you start to crop your movie video, you can select an output aspect ratio from the Zoom list. There are four choices available: Full screen, Keep original, 16:9 and 4:3. After you select an output aspect ratio and finish the crop, the result can be previewed in the Preview window of the program main interface.
    dvd ripper for mac

    Thanks! But when I visit the site recently, I found the program was upgraded. Now it has 2 optimized output formats specially made for iPod 30G and 60G players! Thus it is easier and more convenient to use without complex settings as other software. Try it at http://www.imtoo.com/downloads/dvd-to-ipod.converter.exe
    Another good news: there was a new discount suite ImTOO DVD to iPod Suitethat contains both the DVD to iPod Converter and iPod Movie Converter. It saves newly $20! Hope this can do some help

  • Are there any mp3 players that CANT record and runs by replacable batteri

    hello,
    like the topics says, are there any mp3 players that DOES NOT have the recording function and runs by replacable alkaline batteries?
    i really need one as i am working in a place that requires stay in and i cant charge players, what makes it worst is that there are like top secret information there and they forbits any recording devices, which most mp3 players have XD
    Some help please? thanks! =D

    You can check out the MuVo Sport C00 and MuVo Mix player. They are both operating using AAA battery and without voice recorder.
    Jason

  • Using other MP3 players with ITunes

    Can anyone give me some guidance? My little girl wants an ipod after having great fun listening to my ipod shuffle. All my music is now stored on iTunes so the question is; does itunes support any other MP3 players or will it only support ipods - I was going to buy her a cheap £15 player.
    Any help would be gratefully recieved.

    JoJo70,
    To elaborate slightly on what polydorus said, cheap mp3 players play mp3 format files only, full stop. The one I have used (in the same price range you are talking about) connects to the PC via USB, and opens in Windows as a folder. You can then copy/paste files into it, or delete files that are already in it. It truly does not care if iTunes is present or not.
    To your comment that "All my music is now stored on iTunes": not really. Your music is stored on your hard drive, and iTunes only contains a library that points to it. There is no reason you can't use the same song files for some non-iTunes purpose, and that is what you will be doing with your daughter's player.
    Sooner or later however, she will want an iPod.

  • Questions about all your MP3 players, because I want to buy a Sandisk but which

    Hello, I am French so sorry for my English, and I did not know where to post my message. I hope it is the best place corresponding to it on the forum.
    My Sansa Clip+ is out of warranty, and I begin to have a bad contact with the output jack. I think I'll replace my player soon and I want a Sandisk MP3 player. I was wondering : 1) What is the difference between Sansa Clip and Sansa Clip+ ? The ability to insert the SD card ?
    2) Why Sansa Clip+ 4GB is more expensive than Sansa Clip+ 8GB ? O.o .
    3) I saw today that I can install software like Rockbox on my MP3 player. If I install Rockbox, I keep the warranty ?
    4) Why buy a Sansa Clip Jam rather than a Sansa Clip+, or Sansa clip sport ? Or, what is the difference between all your MP3 players (Sansa clip, Sansa clip+, Sansa Jam, Sansa clip sport, Sansa Fuze, Sansa clip zip) ? It is important because I have to make a choice

    1)  SD card and lock switch instead of button for screen lock.2)  Prices are fairly random since the players haven't been made in years now.3)  Probably not, but assuming you uninstall I doubt it matters.4)  The Jam/Sport are kind of terrible in general, although battery life is better, at least without rockbox on the older players.

  • Older creative zen mp3 players suddenly not recognized by Wiindows Vista

    Hello
    I have three older Creative Zen mp3 players, a Vision M, a Sleek Photo and an Xtra. The computer has Windows Vista Basic. All thre players were working perfectly three or four weeks ago.. As of a few days ago. the computer is no longer recognizing? all three players. I tried system restore but but system restore is not working. Do I post this problem here or would the Microsoft support forums be a better place to go to for help for this? Thank you for any advice.
    Bridget Ferazzano

    Hello
    I am using Creative MesiaSource Player to manage them, I did the clean up/rebook on the players, I don't know what
    was installed recently from Windows Update. I tried doing a system restore, I have Windows Vista Basci, but I need to restore it to three or four weeks ago and system restore soes not go back that far. I have also done the sfc /scannow and the message I received was Windows Resource Protection found corrupt files ibut was unable to fix them. Is there anything else I can do to fix this problem? Thanks
    Bridget Ferrazzano

  • Was gonna by myself 160gb ipod for christmas...not gonna now...backing up music today... what mp3 players out there are good besides apple and where should i store my music now?

    was gonna by myself 160gb ipod for christmas...not gonna now...backing up music today... what mp3 players out there are good besides apple and where should i store my music now?

    Content acquired with an Apple ID is permanently tied to that ID.
    There is no reason to create a new Apple ID, frankly that will just create more issues.
    It is possible to load content from multiple Apple ID's onto a single device.  If the content is in the computer that the device syncs with, simply select the content and sync it.

  • Is the new earpods support bass in other mp3 players?

    Is the new earpods support bass in other mp3 players?

    The new earpods should support extended bass noise with other devices as it is not a software eq but the actual physical response of the speaker inside the earpod.
    Hope it helps
    Ryan

  • Will any Zen MP3 Players run on Windows

    I've looked at the system requirements for some of the Zen MP3 players, and they all require Windows 98 SE, ME, 2000, or XP. The OS I am currently running is Windows 98. I was just wondering, since there aren't too many differences between 98 and 98 SE, would a Zen MP3 player run on Windows 98?

    forthenight wrote:
    I've looked at the system requirements for some of the Zen MP3 players, and they all require Windows 98 SE, ME, 2000, or XP. The OS I am currently running is Windows 98. I was just wondering, since there aren't too many differences?between 98 and 98 SE, would a Zen MP3 player run on Windows 98?
    There's definitely differences between W98 and W98SE. From what I know W98 does not provided much USB support and thus W98SE was released to provide the desire USB support. Although you can still use USB in W98, lots of problem may occur there. The explaination goes the same for Windows NT too. So that's probably why W98SE was quoted as the minimum OS require.

  • Flash MP3 players...

    Flash mp3 players are becoming more and more popular on the
    web. Anyone know
    of a hub for these things? I mean a site that lists the most
    popular ones,
    their individual features, etc.
    I'm looking for a free one that will simply play an mp3 on a
    server with the
    usual controls. Bonus points if it can mask the source mp3
    file location.
    PS: With css/ajax being as advanced as it's become, has
    anyone come up with
    a non-flash MP3 player that does the same thing? I wouldn't
    be surprised if
    someone did..!

    Mashable is designed for myspace users & appears to use
    code located on
    their site. If that doesn't suit your needs, here a few
    others - some free,
    some not.
    Single Flash MP3 players that use playlists.
    http://www.wimpyplayer.com/products/wimpy_mp3.html
    - fee per site
    http://www.swishzone.com/index.php?area=products&product=jukebox
    - one time
    software fee
    http://www.mediacollege.com/flash/media-player/
    - free
    Good luck on your project!
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "mjs" <[email protected]> wrote in message
    news:fgnpns$4dv$[email protected]..
    > Not bad, but unnecessarily big (visually).
    >
    > Question... How dependant am I on mashable.com being up
    for this to work?
    Or
    > can I download the swf? If so, where is the link
    location stored? On
    > mashable.com? Or is it merely encrypted?
    >
    > "Nancy O" <[email protected]> wrote in
    message
    > news:fgnfd3$k62$[email protected]..
    > > This is free.
    > >
    http://codes.mashable.com/flashmp3player
    >
    >

  • STOP Smashing your mp3 players peopl

    LISTEN UP !
    DO NOT and mean DO NOT smash the thing on the table
    that is the stupidest thing i have ever heard and
    i have registered simply to display my disgust in you people
    advising others to do this.. its insane and you ALL know it !
    yeah I too have the same problems everyone else is reporting
    (on my Zen Microphoto 8gb)
    PLease people read the knowledge base article suggesting
    that you change permissions in the registry AND also make
    sure you don't have any other issues like services in xp disabled
    such as SSDP and uni'versal plug and play device host
    the bottom line here is i was shut out and completly unable to use my player
    and had troubles charging and almost a 00% failure at getting it detected in xp
    and I NOW HAVE IT FIXED by listening to creative !!!!!
    i have been using my player everyday for a week straight with only minor
    detection in xp issues and i believe MICROSOFT is to blame somehow
    as in a possible update or software conflict of some sort etc
    PLEASE people trust me stop smashing your mp3 players !
    (and exhaust ALL other options such as creative's support web-page wizard thingy)

    we had major problems too with 2 creative zen v plus but tech support was fast in reply. I did everything they said to do and while the first thing did not stop the freezing...the third thing they said to do has solved it. Both players are used every day for audio books and work well. I know most people who find their way here find it because they have trouble with their players but I am now very happy with creative!

Maybe you are looking for

  • Multiple Languages - Challenging Question

    This may be an easy answer, as in 'can't do it' however, here it is: Project includes two languages - English, Spanish I understand the multi-language menu setup and multi-audio stream setup. In each video sequence of the project, two separate graphi

  • Custom Approval Screen required for workflow to be executed via CRM Web UI

    My requirement is to create a custom approval screen for workflow. I am Not aware as to how to create a custom approval screen for workflow that could view via CRM Web UI and Execute the workitem as well. Experts please help me with the creation of a

  • Website works in all browsers except for Internet Explorer

    I purchased a template online and added our content.  After uploading to our server I tested with FIrefox, Safari, Chrome and IE.  It works exactly as expected in all browsers except for IE.  I'm sure it is a grid issue, but I am a novice web designe

  • Why can't I get messages to work in new iPad?

    I have new wireless ipad and the ipad1  When trying to use messages it works in ipad1 but  I get Could not sign in Please check your network settings and try again message.  the facetime won't activate either.  my network works because I can get onli

  • How can i call the public void paint(Graphics g) method on click of button?

    Hello, I have done this before i know its got to do something with the repaint() method but can someone show me with and example and call the paint method using AWT in a frame not in an applet.... Thank you very much.