MP3's on external drive-how to link to itunes

Hi
I have all my mp3 files on my external hard drive. How do I view them in itunes, so I can then sync them with my ipod. They used to be on my Mac, but re-installed the hard drive so lost the library files

Use the Add to Library command (under the File menu). If you don't have the preference for the location of the iTunes Music folder set to the external and don't want the tracks moved to the internal drive, make sure that the option to "copy files to iTunes Music folder when adding to library" is not set in the iTunes -> Advanced preferences.
Regards.

Similar Messages

  • When copying Itunes to an external drive, how do I get iTunes to feed from the file on the external drive and not the computer/

    I've already copied my iTunes folder onto my external hardrive. I'm having problems getting iTunes to pull the information from the external hardrive and not the computer's internal one, though. Any suggestions on how to get it to work?

    iTunes works off of an ITL file in the iTunes folder
    instead of dragging the folder out of the external hardrive and onto the desktop just do this
    -hold shift key and double click iTunes to open it up
    -you will get a prompt asking to create a new library or choose library, click choose library
    -an explorer window will open up and you are going to navigate to the external hard drive and open the iTunes folder
    -in the iTunes folder you are going to find a file that doesn't look like a folder but a page with a corner folded on it that is your iTunes library file
    -double click the iTunes library file and your library will appear and you are good to go
    WARNING: this is a good method for making sure your music doesn't take all of your computer's storage but keep in mind if you remove the external hard drive from the computer you may have issues accessing the library example next to the song titles

  • My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2.  USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head.   The fastest speeds you can typically get are about 300 Mbps.   Firewire, on the other hand, has very little overhead.  The fastest speeds you can get are very nearly 800 Mbps.  You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus.  Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it. 
    Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance.  A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
    USB 2 will work perfectly fine... just not as fast.
    Also... it's much safer to move the entire Aperture library than to "relocate masters".  Your images must be managed.  You can Aperture manage them, or you can manage them.  But someone has to manage them.  If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge.  If you do, you'll break the links to your masters and start having problems with missing masters.  If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
    Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.)  There are only two kinds of hard drives in the world:  (1) those that have failed and (2) those that are going to fail.  There are no exceptions to this rule.  Hard drives are cheap.  Backup software is built into Aperture and into your Mac.

  • MOVING mp3-files from external drive into iTunes automatically

    Hi all,
    for historical reasons (mainly because I was coming from Windows years ago) I have stored all my mp3-Files (audiobooks, songs, etc) on an external harddrive. My iTunes library is stored on the external drive, too and all media content in my iTunes library is manually linked to the external drive.  Today the option iTunes >Setting >"Let iTunes manage your library" ias well as "Copy filed to iTunes Media folders" is UNchecked.
    In my iTunes library there is only a subset of all mp3-files included.
    Now, I would love to get my library moved to the mac as well as the audio and video-files, and let iTunes manage the storage of the library!
    As far as I know once I move the library (manul or automatic) to the Mac and check the option to let iTunes manage the and copy content, then iTunes will COPY the medial files to the Mac.
    Given that I have only included a subset of my entire repository in iTunes I will then end up with a mess of mediafiles on my external drive where some are doublicated while others aren't. I will be impossible to figure out afterwards what is included in iTunes and what isn't.
    Hence the perfect process would be if iTunes could, while executing the import following the automation-Option (see above) and MOVE the files from the whereever and bring it to the place it want's it to be.
    Is there any way to get this automated and get iTunes MOVE the files instad of copying?
    That would be a tremendous help!
    Many Thanks for your thoughts!
    Mattthias

    Hi mradvanyi,
    For help with adding music files to iTunes I would suggest looking over the steps in this article -
    iTunes: About the Add to Library, Import, and Convert functions
    http://support.apple.com/kb/HT1347
    If this does not help, please respond and we will see what else can be done.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • When I backed up files on my external drive, I inadvertently dragged my itunes library there. Now I can only play songs on my laptop when my external drive is plugged in. How do I get the library back to my computer

    When I was backing up files from my computer to my external drive, I inadvertently dragged my itunes library to the external drive. Now I can only play my library when my external drive is plugged into my computer. How do I get the library location changed back to my computer?

    Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
    You need to install a third party program that will read the NTFS format.
    There is various software from PARAGON, Tuxera and NTFS-3G
    When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
    The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

  • HT1364 I need to reload my operating system on my computer.  I created a folder, itunes media, on a external drive. When I download itunes again how do move my library information back?

    I have to reload my operating system.  I created and copied my library info to a folder, itunesmedia, on a external drive.  when I download itunes again, how do move the files back?

    You need to follow the moving media per: http://support.apple.com/kb/HT1364

  • I want to keep my music on my macbook and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.?

    I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.? so i can drag more movies across later. i am able to plug my external into my Apple Express to stream to my apple Tv arent i..???

    Post your question in the iTunes area:
    https://discussions.apple.com/community/itunes/itunes_for_mac

  • Want to run iTunes from an external drive, how?

    I want to run iTunes from my external drive, I have already made back ups of my library and media files but I can't figure out how to save iTunes to the external drive? When you download itunes it just automatically downloads to the computer. Can you even do this? If not, how can I use the saved info on my external drive (library and media files) with my itunes on the computer. The problem we are trying to solve is a lack of space on our computer and we want to free as much space as possible. Thanks!

    I want to run iTunes from my external drive, I have already made back ups of my library and media files but I can't figure out how to save iTunes to the external drive?
    Drag the iTunes library to the external drive, launch iTunes with the Shift key held down, and point it there.
    (56927)

  • My laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    my laptop had to be reset to factory settings. prior to that i had all my itunes songs stored on a portable drive. how do i get itunes to recognize the drive as its library?

    If the library file is on the external drive, hold <SHIFT> while launching iTunes.  When it prompts to select a library file or create a new one, point it to the location of the library file.
    If the library file was on the internal harddrive, easiest solution is to restore it from the backup.  If no backup exists, use File > Add Folder to library.  Also under Edit > Preferences > Advanced, change the library location unless you want iTunes to move the media to the internal drive.

  • Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

    Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.  

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • Is it possible to have your music and videos saved on different external drives and use the same iTunes library?

    Is it possible to have your music and videos saved on different external drives and use the same iTunes library?
    I am running out of space on my external hard drive and would like to split the movies and music between two external drives while using the same iTunes library is this possible.
    My library is stored on the external drive all of my music etc is stored.

    Yes.

  • Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems

    Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems?

    And or use it at the same time my ipod is using a public wifi source for the internet doing my homework?

  • Copy to external drive lost a part of itunes

    My hard drive was full, so I started to move stuff over to an external hard-drive. The only problem was that all that happened was that a copy was made so the file or folder had to be deleted out of the main inorder to make space on the main hard-drive.
    I copied itunes and deleted it from the main. What I have now is a list of all of my music like I used to have in itunes. Except that I get an exclimation point instead of a speaker to the left of the song. I get the message "itunes can't find that file". When I want to play music or anything else I need to do a search for it in "itunes music" (a folder) and chose it... In order to have the music playable I will have to do this for each song one at a time for all of my music. Is there a different way of doing this or am I up a creek.
    G5   Mac OS X (10.4.8)  

    Unfortunately, as you now know, that was not the best way to try and move the files. So sounds like we might be able to fix it. Exit iTunes.
    On your internal drive you have the iTunes folder and in that there is the "iTunes Music Folder" (where you were moving files out of) plus two database files and maybe another "Previous iTunes libraries" folder.
    Grab that whole iTunes folder from your internal drive and copy it to the external drive. Now take all those folders you have previous moved from the internal to the external, and drag them into the "iTunes Music" Folder inside the iTunes folder that is now on your external drive.
    Now start up iTunes and immediately hold down the OPTION key. You should be presented with an option to create a new iTunes library or open an existing one. Pick to open the existing one and point to the iTunes folder on the external drive.
    If all goes well, it should open and iTunes should now have all the songs locations known. You might find a few you need to redirect, perhaps some of the ones you already tried to redirect iTunes to.
    Let me know if that worked or not.
    Patrick

  • External drive, how to format and partition?

    Hey everybody!
    I'm about to buy an external drive for my mac. I am reasonably capable on a computer, but I've never done formatting or partitioning so I have two questions:
    1) I just want to check that I do not need to buy a mac-formatted drive. A little big of googling told me I could do the formatting myself with Disk Utility, just wanted to double check that that was true.
    2) Once I get my external drive, what I want to do is create two partitions within that drive, one for my Time Machine backup and one for random files and movies. I'm not sure how to do that (apparently I might need to pick different formats for each in Disk Utility?) so if anybody could help out that would be brilliant.
    Thanks
    (if that helps, I have a MacBook Pro with a 512GB hardrive, and I want to buy a 1TB external drive)

    Hi,
    Here is a link that will help you set up your external drive. http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os- x/
    You won't need different formats for Time Machine backups and storage space partitions. However, given the size of your hard drive, 500 gb for Time Machine may not be enough. You could buy a separate one for Time Machine, budget permitting.
    Check the size of your startup disk, and if it is only 250 gb or less, then 500 gb for Time Machine may be OK, for a while. It will soon fill up, but the older backups will be erased.
    Regards.

  • Time Machine Backup on External Drive Invalid sibling link

    I've used time machine to backup macbook air for several months.  From Feb 2011 without any problems until about 2 months ago.  I started to get the message that backups could not be started.
    I realized that the disk would not mount right away.  And after about 10 minutes or more I would get the message that my disk could not be mounted.  The error said my data could be backed up and I should do it right away.
    Okay, so I try to copy my backup files using finder and get an error saying I don't have permissions to copy data.
    My research indicates my hard drive is failing, which is unfortunate, since I bought it within the last year :-(
    Okay, so now I am trying to get my months worth of backups off the drive and this is proving to be quite difficult...actually, impossible.
    Here are my latest attempts at resolving my issue:
    1.  Ran Repair Disk - reusts:
              error:  Could not repair disk and something about backing up my data and reformating the disk
    2.  Ran fsck_hfs -f command in terminal
         The system indicated it was executing the command and about 2 or 3 minutes, I think the command prompt appeared.  No other message
    3. Run repair disk again - My results:
         Checking catalog file.
         INvalid sibling link
         rebuilding catalog B-Tree
         The volume My Passport could not be repaired
         Volume repair complete
         Updating boot support partitions for the volume as required
         Error:  Disk Utility can't repair this disk...disk, and restore your backed up files
    4.  Created a new partition on another external drive and did a restore in Disk Utility from the broken drive to the new partition on the other drive.  Took a few hours.  Unfortunately, I just created the same problem on that partition (invalid sibling link)
    Any other ideas on how I can rescue my backup data from the My Passport drive? I can see it in finder but I can't copy it do my other drive!
    Research on forums and other sites have mentioned cloning the drive using "dd" command.  Is this the same as the disk utility restore?
    Is there some way I can change the permissions of the disk/partitition/files to enable me to copy the data to the new external drive?
    Here is what the system looks like:  Mac HD is my mac mini; My book is the WD 1TB external drive usb connected;  My Passport is the broken external drive with the time machine backups that I can't get access to.
    unknown3c07544bc705:Volumes oshunj$ ls -ale
    total 8
    drwxrwxrwt@  5 root    admin   170 Dec  4 09:40 .
    0: group:everyone deny add_file,add_subdirectory,directory_inherit,only_inherit
    drwxr-xr-x  29 root    wheel  1054 Dec  3 18:17 ..
    lrwxr-xr-x   1 root    admin     1 Dec  3 18:10 Macintosh HD -> /
    drwxr-xr-x@ 15 oshunj  staff   578 Dec  3 20:46 My Book
    drwxr-xr-x@ 14 oshunj  staff   544 Oct 16 19:32 My Passport
    unknown3c07544bc705:Volumes oshunj$ ls -Orbitlake /Volumes
    total 4
         2 drwxr-xr-x@ 14 oshunj  staff  -       544 Oct 16 19:32 My Passport
    335990 lrwxr-xr-x   1 root    admin  -         1 Dec  3 18:10 Macintosh HD -> /
         2 drwxr-xr-x  29 root    wheel  -      1054 Dec  3 18:17 ..
         2 drwxr-xr-x@ 15 oshunj  staff  -       578 Dec  3 20:46 My Book
    10710 drwxrwxrwt@  5 root    admin  hidden  170 Dec  4 09:40 .
    0: group:everyone deny add_file,add_subdirectory,directory_inherit,only_inherit

    ***Update to ask question***
    I would love to setup my new mini like my MBA.  Is there anything wrong with restoring my entire drive, I think it starts at /User/ level, to my mini????
      You know you never know when you will need the backups.  This makes me angry especially since I can see the files but can't repair the disk.
    OTOH, I attempted something I just now read about, option-click on time machine icon. Funny thing, I selected other disk and my passport (original broken drive) popped up with time machine backups on it.
    I, quite timidly, selected the disk, opened the time machine and traversed my broken drive with backups from feb.
    hmmm.  I then, selected some random pdf file to restore and behold, It was restored to my mac mini right before my eyes.
    I'm confused.  But I think I will go with your suggestion and just put the drive away in a closet somewhere and hope to never really need it.  It is quite interesting though that I am unable to repair this disk but I can restore files from it....Odd, I tell you, odd....
    Thanks

Maybe you are looking for

  • Deployment of an Adobe AIR application in an enterprise environment

    Dear Team members, first of all my apologies for posting this thread in more than one forum (see Installations Issues) but the argument is very important to us and I don't know where discuss it. I would like to post a question to you regarding deploy

  • Poor Performance with Webi on top of BW - Large Navigational Attributes

    We have recently developed a reporting model based on having a BW cube of approx 20 million records. This has 2 very large line item dimensions (one 14 million records, on 6 million records) that both have navigational attributes stored against them.

  • Problem with variable declared in TOP Include

    Hi, I have declared a variable P_TEXT in TOP include ZPGM_TOP.  In main program ZPGM, I have declared this TOP include ZPGM_TOP and another include ZPGM_F01. I am  accessing P_TEXT in include ZPGM_F01, but it is giving me following error when I do sy

  • Concurrent managers down

    Dear All, Today morning concurrent managers were down on production. when i checked the concurrent logs observed the following error. Shutting down Concurrent Manager : 27-FEB-2012 04:21:24 List of errors encountered: _ 1 _ Routine AFPSMG encountered

  • Had firefox sadly uninstalled in error Now i cannot re install VERY frustrated

    I installed firefox and in error i uninstalled it I have tried more than a dozen times to reinstall. It informs me that it is already on my PC and i need to uninstall . I have looked everywhere (70 year old silver surfer) and i cannot find on my PC P