Mp4 audio flawless replayed

x2-01 users anyone having mp4 audio problems,please acknowledge to exchange notes.i have excellent sound quality but there is 1 to 2 sec distortion at times.audio problems in videos to be precise.i am seeking flawlessness in audio too.if not time for hardware check i suppose.okey dokey.

My x2-01 can play high quality 25min mp4 videos well with no sound problems but when you try to playing a movie that is 1 hour long, the audio gets **bleep** after 40 minutes.

Similar Messages

  • Mp4 audio flawless

    x2-01 users anyone having mp4 audio problems,please acknowledge to exchange notes.i have excellent sound quality but there is 1 to 2 sec distortion at times.audio problems in videos to be precise.i am seeking flawlessness in audio too.if not time for hardware check i suppose.

    My x2-01 can play high quality 25min mp4 videos well with no sound problems but when you try to playing a movie that is 1 hour long, the audio gets **bleep** after 40 minutes.

  • Playing mp4 audio gives error message "Video can't be played because the file is corrupt"

    Playing a particular mp4 audio file directly from a website link gives error message "Video can't be played because the file is corrupt". However other mp4 audio files from this same website do work correctly. What can I do to get all the the mp4 audio files to play directly from the same website? I must have the correct plugins, etc. since the other files play. This file is not playing from YouTube, is it on the website.
    Thank you for your help.

    What is the link to the site and file in question?
    MP4 files should be handled by Firefox itself, not a plug-in.
    # Click the ≡ Menu Button and choose Add-ons.
    # Click Plugins.
    # Set every plug-in to "Never Activate".
    # Try loading the file again. Is there any difference?
    You have two versions of Flash Player installed. Perform a clean installation of Flash Player as follows.
    # From the following page, save the uninstaller somewhere handy, like the desktop.
    #* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
    # From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
    #* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
    # Exit all applications.
    # Run the uninstaller.
    # In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
    #* <pre>C:\Windows\system32\Macromed\Flash\</pre>
    #* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
    #* <pre>%AppData%\Adobe\Flash Player\</pre>
    #* <pre>%AppData%\Macromedia\Flash Player\</pre>
    # Restart your computer.
    # Run the installer for other browsers.
    # Run the ActiveX installer if you downloaded it.

  • How to play mp4 audio files as video on my iPod Touch?

    I know you are all thinking that this is a stupid question based on the topic, but I have videos for some reason that are in the form of mp4 audio, but they are video when I play them on my computer. I can open these videos (mp4 audio instead of mp4 video) using Windows Media Player and it's not just audio, there is also video. However, whenever I try to sync it to my iPod, it shows up in my music section instead of videos. If i play the video under music, all I see is the white iTunes background, no video. Is there anyway for me to set these files to be recognized as video and store it under my movies category?
    Thanks.

    First, go into Get Info and change the Media Kind on the Options tab to tell iTunes that this is a video. Next, you need to sync this item from the Video tab on your iPod detail in iTunes (i.e. don't sync it as if it was a Music item). If you sync all video content then this will happen automatically once you change the Media Kind. But if you only sync part of your video library, make sure you include this video in the sync selection.
    If you still have problems, you may need to convert the video for iPod playback, even if it plays fine in iTunes. If that's the case, right-click on the video and you'll see an option to convert for iPod use, which will make a copy (so make sure you know which version to sync to the iPod, or simply delete the original).

  • Mp4 audio playing

    dear friends,
    i am using nokia 6681 and i want to play mp4 audio files in my mobile. but i am not able to play the files as i converted some mp3 files into mp4 through nokia music manager converter.
    please help me
    thanks

    Hi suman1979
    Perhaps you need to download converter such as SUPER:
    http://www.erightsoft.com/SUPER.html
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    AAC is Advanced Audio Coding.  Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD).  More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder).  Therefore your LG phone won't play them.
    You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button.  Change the AAC Encoder to MP3 Encoder.  After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version."  You'll get a copy of the song that should transfer to your SD card and have MP3 encoding.  Hopefully your phone will play that.

  • Transfer MP4 audio recordings from iPhone to MacBook Pro

    Hi there! I want to transfer some MP4 audio recordings from iPhone to MacBook Pro. The only option I'm being given is via e-mail or message but the audio recordings are too long to send in these formats so I would like to bluetooth from iPhone to MacBook Pro.
    Does anyone know how?
    Thanks!

    You're welcome.
    Just noticed you're on a Mac...look at this:
    http://www.ecamm.com/mac/phoneview/
    Either or...PhoneView only works on OS X.

  • Nero MP4 audio problem

    I have a number of MP4 audio files created using Nero 6. With the recent upgrade of iTunes, the program now interprets them as video. The screen turns black and the sound quality is extremely bad. Besides converting the format, is there a way to coax iTunes to play them as pure audio like the older version did. I have a new x-fi soundcard but I don't think this is the problem because they play fine in other audio applications.
    Hope someone here can help, and thanks in advance for any advice offered.

    Rename 'em to M4A files. This usually works.
    Failing that, load the files up in foobar and use the "Optimize MP4/M4A" function on them. This sometimes helps.

  • Apple iPod and AAC/MP4-Audio experiences

    Hi,
    i'm looking for Arch users who have experiences with the integration
    and using of the Appe iPod with AAC/MP4-Audio.
    Is gtkpod the first selection ?
    Is AAC/MP4 possible with Arch linux ?
    Etc.
    Thank you and
    regards
    bademeister

    jaboua wrote:
    bademeister wrote:Is AAC/MP4 possible with Arch linux ?
    Linux can play AAC and MP4 if that's what you meant
    Yes,
    for me it is intesting, what kind of program is nearly to iTunes
    (gtkpod or amarok for example) without a virtualisation to use iTunes
    direct.
    So in this case it is important to manage AAC/MPEG4-Audio files for me.
    I heard it is a little bit tricky under Linux and i don't found realy a good
    solution.
    And this is the reason why i took this forum to collect some experiences
    what kind of piece of software is good and manage AAC/MPEG4-Audio
    (direct). So in this case what i need for a full support and and and.
    Regards
    bademeister

  • Can my iMac play back mp3 or  mp4 audio?

    I would like to know if I can play mp3 or mp4 audio files on my iMac with OS X Yosemite. iI is a 27" 3.2 GHz with an Intel Core i5 and 8 gig memory. I am interested in an audio bible study in that format. I appreciate any help I can get.
    Thank you,
    Lee W.

    Of course. Mp3 is universal standard. Mp4 is a standard based on Apple audio/video specs
    Pretty much any Mac can play either format natively.
    The included Quicktime player should be able to handle the formats without any issues.

  • Playing streamed MP4 audio in a Flash movie

    Is anyone aware of an xtra/extension for Flash that would
    enable a flash movie to play files save in the mpeg-4 audio (mpa4,
    mp4) format? I'm looking at flash-based podcast players, and one I
    found said that it can't play podcasts published in mp4 format
    because flash player 8 doesn't support it.
    I thought though that maybe there would be a 3rd party
    xtension or something that would enable it to play those
    podcasts.

    illovich wrote:
    > Is anyone aware of an xtra/extension for Flash that
    would enable a flash movie
    > to play files save in the mpeg-4 audio (mpa4, mp4)
    format? I'm looking at
    > flash-based podcast players, and one I found said that
    it can't play podcasts
    > published in mp4 format because flash player 8 doesn't
    support it.
    Flash does not have any extension or plugins, never had.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Export to mp4 audio out of sync

    I have a .mov that I'm trying to export as mp4 for web streaming. Actually this is the 2nd I've done and the first went OK. But the 2nd one loses it's audio sync with the video. audio is slow and gets off by maybe 2minutes by the end of the 45 minutes. The .mov is fine but the sync problem is happening when I export to mp4
    Here is what I've done:
    I record a webinar w/screenrecord2 and first I tried quicktime pro export (Boy it took a long time!!) to mp4 w/default (H.264, 640x480) except slower frame rate and set for webstreaming. The audio sync was off.
    I read something about hinting helping audio sync problems so I then tried export to a hinted .mov and then to mp4 and still not good audio sync.
    Next I tried export the hinted .mov via Streamclip and it went much faster and better video quality than the export via quicktime pro but still the audio loses sync.
    The .mov is about 2.5gig and 45 minutes long exported mp4's about 80meg
    Any help is much appreciated!
    Is there a way in quicktime pro that I can speed up the audio of the mp4 and get it back into sync??

    Hi Robert, i just want to check you are actually going to be posting your material to a real streaming sever i.e quicktime streaming server, darwin server, helix server.
    If not then you won't actually be streaming the file, i've been doing a lot of work on streaming servers recently and the first thing i found was that the term streaming is often misused. If you are only posting your file on to a web server for people to view then quicktime has something called quickstart which will allow you to watch the video as it downloads like youtube, this isn't streaming.
    With regards to extensions i would be much more inclined to use .mov over .mp4, it will make life easier for your viewers because you can guarantee at some point real player will try and hijack the .mp4 extension for some of your viewers.
    Cheers
    PS: Can you post hwre the file originates from, it's possible the problem stems from further up the chain but only comes to light when the file is exported. I find editing in quicktime and then exporting can often be problematic.

  • Mp4 Audio out of synch

    Hi there
    I recorded some video recently for a small project and saved in MP4 format (using a Panasonic HC-V510 HD camcorder).
    I've come to edit the material today and noticed that all of the files are out of synch, even though video/audio were all recorded together on the camcorder and imported as MP4 files straight into Premiere Pro - hence synch should be maintained.
    I've read elsewhere this could be a CODEC or Ecoding issue by the camcorder is not sophisticated enough to have allowed any manual intervention of any of these settings.
    So puzzled by:
    1) what would cause the files to be out of synch
    2) how to get them back in synch automatically
    Many thanks for any help and advice.
    Regards
    Alan.

    I had similar problems, using my ne Galaxy S4mini, recording in 1920x1080p30, working on Py Win7-64, Adobe Premiere Pro CS 6.0.5:
    when copied from SD Card/S4mini to PC in Win7-64
    playback with win media works fine, video and audio are in sinc
    also using apple Quicktime player, works fine,
    but imported in Adobe Premiere pro CS 6.0.5.
    video and audio are out of sync.
    using media infos software I got these information about the clip:
    General
    Vollständiger Name                       : F:\01 Videoprojekte\Premiere Projekte\2013-11-16 Gerd 60er BA\clips test\20131117_192120.mp4
    Format                                   : MPEG-4
    Format-Profil                            : Base Media
    Codec-ID                                 : isom
    Dateigröße                               : 25.5 MiB
    Dauer                                    : 12s 928ms
    Gesamte Bitrate                          : 16.6 Mbps
    Kodierungs-Datum                         : UTC 2013-11-17 18:21:37
    Tagging-Datum                            : UTC 2013-11-17 18:21:37
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format-Profil                            : [email protected]
    Format-Einstellungen für CABAC           : Yes
    Format-Einstellungen für ReFrames        : 1 frame
    Format_Settings_GOP                      : M=1, N=30
    Codec-ID                                 : avc1
    Codec-ID/Info                            : Advanced Video Coding
    Dauer                                    : 12s 794ms
    Source_Duration/String                   : 12s 805ms
    Bitrate                                  : 16.6 Mbps
    Breite                                   : 1 920 pixels
    Höhe                                     : 1 080 pixels
    Bildseitenverhältnis                     : 16:9
    Modus der Bildwiederholungsrate          : Variable
    Bildwiederholungsrate                    : 29.207 fps
    minimale Bildwiederholungsrate           : 9.694 fps
    maximale Bildwiederholungsrate           : 130.058 fps
    ColorSpace                               : YUV
    ChromaSubsampling                        : 4:2:0
    BitDepth/String                          : 8 bits
    Scantyp                                  : Progressive
    Bits/(Pixel*Frame)                       : 0.274
    Stream-Größe                             : 25.3 MiB (99%)
    Source_StreamSize/String                 : 25.3 MiB (99%)
    Titel                                    : VideoHandle
    Sprache                                  : English
    Kodierungs-Datum                         : UTC 2013-11-17 18:21:37
    Tagging-Datum                            : UTC 2013-11-17 18:21:37
    mdhd_Duration                            : 12794
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format-Profil                            : LC
    Codec-ID                                 : 40
    Dauer                                    : 12s 928ms
    Bitraten-Modus                           : Constant
    Bitrate                                  : 119 Kbps
    nominale Bitrate                         : 128 Kbps
    Kanäle                                   : 2 channels
    Kanal-Positionen                         : Front: L R
    Samplingrate                             : 48.0 KHz
    Compression_Mode/String                  : Lossy
    Stream-Größe                             : 188 KiB (1%)
    Titel                                    : SoundHandle
    Sprache                                  : English
    Kodierungs-Datum                         : UTC 2013-11-17 18:21:37
    Tagging-Datum                            : UTC 2013-11-17 18:21:37
    Is there a workaround to get vid and audio in sync?
    Hapewin

  • Software 7.0(6897.5) update causes loss of MP4 audio

    I recently updated one of my Apple TVs (AT) to software version 7.0(6897.5).
    After the update some of my MP4 movies no longer had audio.
    But other MP4 movies played audio fine.
    iTunes was still able to play all the MP4 movies on my PC with the audio present.
    So this told me the problem was with the AT.
    I then tried the menu restart option in AT, no luck.
    I then tried unplugging the AT (both HDMI and power) and reconnecting after a few minutes, no luck.
    I then tried swapping the AT with another one that I own that has software version 6.1.1(6698.99.19) and all of my MP4 movies play their audio just fine, like before the update to 7.0
    I then swapped back to the AT unit with 7.0 version software and again some MP4 movies play audio fine and others have no audio.
    This tells me there is a bug in version 7.0.   Any word on when there might be a fix?

    An update.   I tried something with one of my MP4 movies that would not play audio with software version 7.0 that worked.
    I re-created the MP4 movie and changed the audio format from 5.1 format to stereo format and now I get the movie with sound.
    The original MP4 movie in 5.1 audio still has no sound.
    It appears the software version 7.0 is not compatible with 5.1 audio format.
    I hope they fix this bug soon because a lot of my movies are in 5.1 audio format.

  • Windows media won't play mp4, audio no video

    I upgraded from a desktop to the HP TouchSmart 15 TS Notebook PC so that I would have all the functionality
    of a new operating system that would work. Guess I was mistaken?!?!?! I have the same problem I had with my old crappy desk-top, MP4 videos still don't play on Windows 8.1???? I get audio but no video????? just a black screen?????

    According to Microsoft support website, Windows Media Player still won't support MP4 files. Though we can make WMP play MP4 video by install some codec, sometime we still encounter can't play MP4 in Windows Media Player issue. MP4 is a container format which may contain multiple video and audio streams. And the video and audio stream can be encoded any of several ways. If the MP4 video or audio codec is not WMP installed codec supported one, Windows Media Player won't play MP4 video of this kind. In order to solve "Windows Media Player won't play MP4 files even when the appropriate codec is installed" and to successfully play any MP4 video in Windows Media Player, we had better convert MP4 to Windows Media Player more supported video format like WMV, AVI. Resources: http://www.idealshare.net/video-converter/windows-media-player-mp4.html

Maybe you are looking for

  • Error while migrating charecter set using CSALTER from WE8MSWIN1252 to UTF8

    Hi. I tried to migrate with my database. I did backup, started in restricted mode the database. when I run csalter.plb script I got: SQL> @@csalter.plb 0 rows created. Function created. Function created. Procedure created. This script will update the

  • Error during install

    I downloaded the trial version of dreamweaver and every time I try to install I get the following error--The system administrator has set policies to prevent this installation-- I have xp home sp2 only one user the defalut one setup during windows in

  • Valuation class & material type

    Hi all , Can anyone plz tell me the answer on following What establishes the relationship between a valuation class and material type A.     Valuation grouping code B.     G/L account C.     Valuation category D.     Valuation grouping code. E.     A

  • Access PSPAR in USER EXIT EXIT_SAPFP50M_001 - include ZXPADU01

    Hi, Is it possible to access PSPAR in include ZXPADU01???? (PBAS0001 Enhancement) I want the variable ACTIO from PSPAR. In debugging mode when i tried ()PSPAR-ACTIO it s working, but when i tried it in report, showing error. (  '(' must follewed by a

  • No dictation button on my keyboard

    i got the new ipad with 4G but i cant find the mic button on my keyboard? could someone plz help me? another thing! how can i make sure that my ipad is in deed the new ipad? thanks