MPB Wakes from sleep but then goes right back...

Hey all, having a weird problem since my Lion install. It's happening randomly, with no peripherals attached. I will open my MPB as it has been sleeping closed; the passcode screen will pop up but before I can type, the screen goes black and it goes back to sleep. I press keys, click the trackpad, everything I can think of, but it doesn't respond. When I close the laptop, wait a minute, then reopen, the same thing. The login screen pops up but then blinks out black before I can do anything.
Any ideas?
2.8ghz Intel Core2Duo
8gig RAM

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

TS3899 I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any sugges

I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any suggestions?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Firefox installation made my power saver function misfire - the system goes down after a few minutes of inactivity but then comes right back on again after a few seconds.

My power management scheme: turn off monitor after 2 min of inactivity; turn off hard discs after 5 min of inactivity. doesn't work reliably anymore. Usually, with Firefox installed, the system powers down after the preset times but then comes right back on again after a few seconds. If I restart the machine, my selected power management scheme works properly for a few cycles but then reverts to the mode of turning back on after a few seconds after having shut down.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

When I try to log in on FaceTime I press log in and it goes to the verification then goes right back to the log in page as if I hadn't pressed the button at all

Please help me my iPad won't log into the FaceTime app... Whenever I try to log into it the screen goes to the arification process then goes right back to the log in screen is there any way to fix this?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Updated ipad2 to ios7 and my apps ask for Apple ID and password to open. It then goes right back to main screen

I updated my ipad2 to ios7 and restored backup. My apps now ask for my Apple ID and password. It then goes right back to main screen without opening. Help please

- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

No Airport activity on wake from sleep (but only when opening the lid)

I've read a lot of discussions dealing with wi-fi issues, but none seems to match my own problem.
I purchased a MBP 13" 2.4 GHz mid 2010 a few weeks ago and I'm running SL 10.6.3. I connect to the internet via a Time Capsule ethernet connected to a D-Link DSL 300T modem. Everything is updated and running smooth, but on wake from sleep opening the lid there's no way to get Airport working. Most of the times it's inactive, but I can not activate it in System Prefs > Network. Sometimes shows up as active, the Airport icon in menu bar keeps blinking but can't connect to the Time Capsule (whose light stays green all the time). The only way to get it back to work is restarting the MBP. This does never happen if I don't close the lid, though putting my Mac to sleep: on waking Airport works fine.
I'm enclosing the Console log:
12/06/10 20.50.36 kernel System SafeSleep
12/06/10 23.12.03 kernel hibernatepage_listsetall start
12/06/10 23.12.03 kernel hibernatepage_listsetall time: 241 ms
12/06/10 23.12.03 kernel pages 567484, wire 98732, act 121807, inact 433, spec 197, zf 47, throt 0, could discard act 62083 inact 54861 purgeable 15277 spec 214047
12/06/10 23.12.03 kernel hibernatepage_listsetall found pageCount 221216
12/06/10 23.12.03 kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
12/06/10 23.12.03 kernel IOHibernatePollerOpen(0)
12/06/10 23.12.03 kernel writing 219736 pages
12/06/10 23.12.03 kernel image1Size 257469952
12/06/10 23.12.03 kernel PMStats: Hibernate write took 7803 ms
12/06/10 23.12.03 kernel all time: 7803 ms, comp time: 1432 ms, deco time: 0 ms,
12/06/10 23.12.03 kernel image 511232512, uncompressed 900304896 (219801), compressed 508019200 (56%), sum1 29e36aa5, sum2 c7031b67
12/06/10 23.12.03 kernel hibernatewriteimage done(0)
12/06/10 23.12.03 kernel sleep
12/06/10 23.12.03 kernel Wake reason = EC LID0
12/06/10 23.12.03 kernel System Wake
12/06/10 23.12.03 kernel Previous Sleep Cause: 5
12/06/10 23.12.03 kernel AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity).
12/06/10 23.12.03 kernel en1: 802.11d country code set to 'X3'.
12/06/10 23.12.03 kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
12/06/10 23.12.04 configd[13] network configuration changed.
12/06/10 23.12.05 kernel no card!
12/06/10 23.12.05 kernel no card!
12/06/10 23.12.05 kernel no card!
12/06/10 23.12.05 kernel no card!
12/06/10 23.12.05 kernel no card!
and so on until I restart.
I hope this may get fixed with a software/firmware update, but I'm wondering whether it's a forecast of future hardware failures.
Thanks in advance.

Hi,
my MBP 13" Mid 2010 running 10.6.4. has similar problems. I like to use it closed lid connected to an external display with apple usb keyboard. In closed lid mode airport connection fails several times or I do get a poor connection, e.g. one or two curves in the airport menu bar icon with significant lower connection speeds. I do connect to a airport extreme n station with does its job rock solid. as my wife uses a two year old macbook and I have got an G4 with a sonnet airport card running both without problems even from a greater distance in our home it seems to me that the macbook pro has serious problems operating with the internal wifi antenna in closed lid mode, maybe due to shielding from the lid?
Has anybody experienced the same problem or successfully found a way to solve this problem? When using open lid mode wifi problems never occurred, but that's not the preferred option for my desktop table.

Any way to set password wake from sleep but not...

screensaver?
i have "ask for password on wake from sleep or screensaver" in security prefs.
i'd like to disable that for the screensaver only...any way to do this? terminal, shareware... any ideas?

solved!
found a freeware app on versiontracker called 'utility lock' that lets me lock my mac on sleep only.

Imac wakes from sleep but is unresponsive

My i5 imac with 10.6.8 has recently and randomly started being unresponsive upon waking from sleep. it does not happen all of the time and I can't find a combo of apps or other events that cause the issue to happen. it's only been in the last few weeks and the only changes I've made are the installation of spotify, update of flash and update of pdf reader.
When my imac is asleep I can press a key on the keyboard or move the magic mouse and the screen wakes right up. the mouse cursor moves around the screen but nothing is clickable and no keyboard commands work. if my laptop is connected via disk sharing I can continue to access the files, it's like everything is fine but I can't give input. the dock doesn't pop up and I can't force quit anything. I ran disk utility and it suggested I restart from the dvd and repair the disk. after doing that the HD continues to test fine, when I verify it there are no errors or other things that need fixing. I've reset NVRAM several times and the problem persists. a hard reset is my only way to regain control and then the computer will work fine for anywhere from hours to days. Everything I search for seems to be a different version sleep issues. I have no video distortion, no other problems. can anyone help me out?
thanks!!
Mark

Howdy there Mark,
I would suggest a few steps here.
First I would start with resetting the SMC on the computer with this article Intel-based Macs: Resetting the System Management Controller (SMC) found here http://support.apple.com/kb/HT3964
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Then reset the PRAM if the issue is not resolved:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
I would also perform a safeboot to troubleshoot this as well.
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
All the very best,
Sterling

MBP Won't wake from sleep but shouldn't BE asleep

Hi,
I have a couple MBP's giving me trouble. They both are 2011 8,2 MBPs, running 10.9 and have Crucial SSDs installed. Other similar machines and configurations are fine afaik.
They are set to not sleep when power is connected. The hard drives are set to not sleep. Displays are set to go dark after about 15 minutes. Screen savers are set to never turn on.
Sometimes, about once every week or two, when the user goes back to his computer after the display has gone dark, nothing seems to wake it up. The keyboard and mouse and mousepad do nothing. Pressing the power button does nothing; holding it in for a few seconds and force-rebooting finally snaps it back to life. I assume it's powered on and in some sort of deep sleep from which it cannot awaken since the power button does not work unless we hold it in. While in this state remote desktop shows the machines as being "offline," not "sleeping."
I've seen threads about MBPs not waking but since these are set to not sleep in the first place, I'm perplexed.
I've reset the SMC and the PRAM (btw, does pram even do anything anymore? if not, why is it still there?)
Thanks,
Jeff

Does this problem still exist in the newer versions of the OWC firmware?
While my SSD is not an OWC, I've been having this issue with my OCZ Vertex 2, also based on the Sandforce chip.
OCZ's most recent firmware (1.32) has fixed the issues related to hibernation (i.e. "safe-sleep") but the drive still has issues waking from timed inactivity sleep.
I wrote about it on their support forums in this thread:
http://www.ocztechnologyforum.com/forum/showthread.php?86538-Hibernation-works-b ut-wake-from-auto-timer-sleep-problem-still-present-in-1.32
One of their support staff (who has been very helpful in ironing out the hibernation problems) replied with:
"I can tell you this new FW build has been fully validated by Apple at their labs, it may be possible your machine while fine with hdd may have an issue with newer ssd...or the line of macbooks with this issue are looking now for an efi update.
I will pass this back to SF but I suggest you also contact Apple and ask if a new EFI update is coming."
While my machine doesn't often sleep due to inactivity, it does happen. I am not a fan of the suggestion to set inactivity sleep to never. While this is a way around the problem, I don't consider it a solution—I would like the security of knowing that if I ever walked away from my machine on battery power for a few hours, I would be able to return to something that hasn't completely drained itself of battery.

I recently turned on an iphone 4, I'v set up icloud but the farthest I get on my phone is the "Hello" screen, and once I swipe, it says :Updating Icloud settings, and then goes right back to "hello"

I just dont know how to start using my iphone if the only screens options I have are "Hello" and "updating icloud settings"

Reset it: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

PowerPC clicks into sleep mode, then clicks right back

Hi everyone. New thing I am experiencing since yesterday - my computer will go into sleep mode, but immediately clicks back on again. It's a Dual 2.7 GHz PowerPC G5 from 2005 running on OSX 10.4.11. At first I thought it was an issue with one of our light switches - because sometimes when you press the switch to turn it off, the computer will wake up from sleep. But that switch is completely off and the computer is still having this problem not staying asleep. What can I do to fix this? Thanks.

Hi Christy, and a warm welcome to the forum!
Most often it's a USB or FireWire device that wakes it up, sometimes a PCI card or even a Monitor.
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), see if it sleeps in Safe Mode.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive

Computer wakes from sleep but screen remains black even after restart

So, I installed SL yesterday and everything seemed fine. Last night, I closed my computer's monitor (putting it to sleep) for the night. This morning, when I opened it, the screen was black. I could not see anything, so I just restarted the computer.
On restart, the screen remained black.
After some experimentation, I realized that the computer was actually running, but I just couldn't see anything. So, I typed my password - screen was still black.
I then pressed the power button and enter - shutting down the computer properly.
After it shut down, I turned it on and the screen came on as normal...
What's going on here?
I checked some other threads and there was some potential issue with the iphoto screensaver, but I am not sure if that is the case here or not.
Any thoughts on how to fix this or prevent it form happening in the future?

I just had a similar thing occur. After resetting the pram the screen came back on.
I had noticed some problems with the hot corners for sleep mode earlier so I have deactivated them now to see if this was the problem. The only other thing I can think of is the recent Java update. I installed it right before the problem occurred.
Kurt

HT201263 iPhone restores and then goes right back into recovery mode

Overnight, my iPhone 4 went into recovery mode on its own. I plugged it into iTunes, which detected a phone in recovery mode and asked if I wanted to restore it. I went ahead and clicked restore and the phone went through the whole process. I received a notice on my PC saying that the restore was complete and to wait until prompted to unplug my phone. I never received a completed sign and the phone just goes back into recovery mode and I eventually get another notice saying that iTunes detected a phone in recovery mode.
Is there any hope for my phone or is it toast?

No one does. It's an iPhone 4. Totally and completely out of warranty. I use Straight Talk for my service carrier so I don't even have any sort of support from AT&T.
If I contact Apple, they will charge me $20 just to troubleshoot. Hence me posting in the community. I was hoping someone would have some further information that might assist me in determining whether there was any chance of getting the phone in working order again or if it is toast.
If the problem is hardware, like you indicated at first, it is most likely not even worth spending the money to have the hardware fixed (if even possible) because it is an iPhone 4, not under warranty, and pretty outdated.

Everytime I try and open an app it starts loading then goes right back to the home screen

Some apps work but others don't! I don't understand!

Try restart or resetting your iPod. See here for information: http://support.apple.com/kb/ht1430

TS4268 ipad 1 will not let me sign into imessage.starts to verify and then goes right back to sign in.i tryed reseting network and apple id and no luck.help!!!

anyone?

Did you look through all of the suggestions in the troubleshooting article tht led you to this forum?
When you said you reset the network does that mean your home network or network settings? If you didn't reset your router, try that next. Unplug it from power for about 30 seconds.
Did you check Settings>General>Date and Time>Set Automatically>On?

MPB Wakes from sleep but then goes right back...

Similar Messages

Maybe you are looking for