Mpd and Sonata questions
I started using mpd with Sonata (I was using Amarok till now). I have not found any client that can show play count and song rate. Are these features not supported in mpd?
Sonata can search for covers only in Amazon but never finds any cover. Can I change Amazon to Last.fm or discogs? Can I edit a file to do this?
Sonata is the best client I found, but is not developed any more...
Last edited by hariskar (2012-11-09 14:38:12)
Thank you for replies!
@fiddlinmacx
I tried sonata-fork-git 20121027-1, but did not find any difference. The problems with not finding covers still exist.
I tried gmpc, but I don't like how my library shows, in 3 different panels, I want my library be like Sonata, or Amarok: 3 levels tree view: Genre/Artist/Album
@useradded
Thank you for Cantata without kdependencies!
Here Library is not exactly how I want it to be, but almost: 2 levels (Artis/Album) and Genre at the bottom. There is no option for 3 levels, is it?
Also, in some albums the cover is wrong, how can I change it?
There is no last.fm scrobble support, so I guess I have to run mpdscribble?
Play count and Song rate, why no client has these options? Are they not supported from mpd? This is the main reason I still use Amarok..
Last edited by hariskar (2013-03-06 08:04:29)
Similar Messages
-
Questions about mpd and sonata ram usage
Hi again!
I'm very impressed with mpd and i really love the sonata client with it's cover art , lyrics fetching features .
I've noticed that mpd uses about 13 mb ram and sonata 16 mb of ram. I have about 6 albums in my library .
I was just wondering if it is normal for mpd and sonata to use that ram .
I have enough ram about 1gb so it's not an issue , i'm just curious if this is normal
Also i've noticed that with mpd and sonata the cpu usage is much lower than with audacious when playing files , but the ram usage with mpd is higher
Thanks again
Last edited by shak (2010-06-10 12:15:25)Hmmm...I have Arch64 with a 15,000 collection, MPD uses 9.8MB and Sonata uses 52.5.MB, whether there are songs in the playlist or not.
-
Hi again!
I've installed mpd and sonata but i don't see my library in sonata .
This is my /etc/mpd.conf file
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/andreas/Downloads"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "mpd"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## format "44100:16:2" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
I've add the mpd daemon in rc.conf and i've chosen my directory /home/andreas/Downloads in sonata .Also i put mpd:ALL to etc/hosts.allow
Sonata connects fine to the server but i can't see my libary .
What might be the issue ?
Thanks again
Last edited by shak (2010-06-10 11:27:13)If you continue to have issues with permissions, the solution i use is to simply run MPD as my normal user, storing all the necessary directories and files under ~/.mpd and just pointing it at the config file I stuck there:
$ mpd ~/.mpd/config
No more permissions issues! There's an explanation of this in the wiki. -
[SOLVED] Mpd and sonata doesn't seem to work
Hi guys!
I 'm facing with an issue . I can't seem to configure mpd correctly to run it with sonata .
I've followed the alternative setup from archwiki and this is my config file .
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/andreas/Downloads/Torrents"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/home/andreas/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/home/andreas/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/home/andreas/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/home/andreas/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/home/andreas/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "andreas"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## format "44100:16:2" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
All the files required are in my /home/andreas/.mpd/ directory
config
mpd.db
mpd.error
mpd.log
mpd.pid
mpdstate
playlists
I've also added to my .xinitrc file
mpd /home/andreas/.mpd/config
I 'm sure i've done something wrong but don't know what it is . If anyone could help me out i would be grateful
THanks a for all your help!
Last edited by shak (2010-04-19 23:08:09)shak wrote:
I've followed the first method with the mpd daemon and everything worked fine .
THanks for all your help everyone !
The add of MPD : ALL to hosts.allow seems to solved it .
Thanks again!
Nice.
Please mark threads as [SOLVED] when they are. You can do so by editing the opening post. -
To get sonata working I have followed the instructions in the archlinux wiki [1] and went with the mentioned alternative setup. I have mpd running in the background, but when I open sonata I get nothing.
When I launch Sonata from the terminal I get the following output:
Error grabbing key 173, 0x?????? (some address)
Thanks for any help.
1. https://wiki.archlinux.org/index.php/MpdLooks like a port problem, but can be wrong. First check that nothing goes wrong when you start mpd.
Also check if Sonata connects to localhost over the correct port and that you have something like: bind_to_address "any" in your mpd configuration.
If you start mpd as local user then ~/.mpdconf is used, else /etc/mpd.conf is used. -
Mpd and python-mpd problem utf8
Hi,
i've just update the new mpd and python mpd package, so there is a problem with utf8 directory. Now it can not display my covers.
The error :
Exception in thread Thread-28:
Traceback (most recent call last):
File "/usr/lib/python2.5/threading.py", line 486, in __bootstrap_inner
self.run()
File "/usr/lib/python2.5/threading.py", line 446, in run
self.__target(*self.__args, **self.__kwargs)
File "/usr/lib/python2.5/site-packages/sonata/main.py", line 3971, in _artwork_update
imgfound = self.artwork_check_for_local()
File "/usr/lib/python2.5/site-packages/sonata/main.py", line 3993, in artwork_check_for_local
type, filename = self.artwork_get_local_image()
File "/usr/lib/python2.5/site-packages/sonata/main.py", line 4038, in artwork_get_local_image
testfile = img.single_image_in_dir(self.musicdir[self.profile_num] + songpath)
File "/usr/lib/python2.5/site-packages/sonata/img.py", line 62, in single_image_in_dir
dir = gobject.filename_from_utf8(dir)
GError: Séquence d'octets non valide en entrée du convertisseurI'm having the same output whenever I try to view an artists's albums in the collection and the album title contains non strictly ascii characters (which happens pretty often, as I am not a native english speaker). The problem is that the albums do not appear in the collection ! I can still access them by the filesystem view, but then the songs are sorted alphabetically, not by track number.
This problem appeared with Sonata 1.5. -
MOVED: K8T Neo-FIS2R SATA and Linux Question
This topic has been moved to Operating Systems.
K8T Neo-FIS2R SATA and Linux QuestionQuote
Originally posted by chasmon
Hi all,
I have just setup up a brand new system but am having probelms getting it working. I want to install XP on a single Maxtor 160Gb drive.
I have my HD on Promise Ser1 and all SATA stuff in BIOS enabled. When I get to the screen I press F6 and then when promted I insert the floppy with the promise drivers on. I then get this message:
"File txtsetup.oem caused an unexpected error (4096) at line 1742 in d:\xpclient\base\boot\setup\oemdisk.c"
I can't get past this screen I have tried:
1.Drivers from the CD supplied.
2.Drivers from the MSI website.
Please help me this lot cost lots of hard earned I'm pretty gutted at the moment. I have also tried the Via chipset with no joy.
System:
Antec 380W PSU and Sonata Case
LG DVDROM 8163B
NEC DVDR/RW 2500B
Panasonic Floppy
Neo FIS2R mobo
Maxtor Diamondmax Plus 9 160Gb SATA150
Benq RF K/B & Mouse
Don't spam man! I posted something to this same question in another thread.. from you no less! Make a new thread! lol
Hijacking = bad!
Ian -
Account with an icon of a face and a question mark
Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
14% WindowServer
3% hidd
2% Safari
1% Dock
0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
EdoardoSmiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best. -
Performance issue and functional question regarding updates on tables
A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
DO.
" Lock the record that needs to be update with material creation date
CALL FUNCTION 'ENQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
" Wait, if the records not able to perform as lock
CALL FUNCTION 'RZL_SLEEP'.
ELSE.
EXIT.
ENDIF.
ENDDO.
" Update the record in the table MARC with material creation date
UPDATE marc SET zzdate = wa_mara-zzdate
WHERE matnr = wa_mara-matnr AND
werks = wa_marc-werks. " IN s_werks.
IF sy-subrc EQ 0.
" Save record in the database table MARC
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'S'.
" text-010 - 'Material creation date has updated'.
wa_log-message = text-010.
wa_log-zzdate = wa_mara-zzdate.
APPEND wa_log TO tb_log.
CLEAR: wa_return,wa_log.
ELSE.
" Roll back the record(un save), if there is any issue occurs
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'E'.
" 'Material creation date does not updated'.
wa_log-message = text-011.
wa_log-zzdate = wa_mara-zzdate..
APPEND wa_log TO tb_log.
CLEAR: wa_return, wa_log.
ENDIF.
" Unlock the record from data base
CALL FUNCTION 'DEQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks.
ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards -
How can i restore my iphone 5s as i forgot my icloud password and sec questions
I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
I cant access now the previously purchase music, because it wants to authorize the new computer to play the
music. I cant remember password and security questions for my old id and the old email doest exist anymore.
What can I do?Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H. -
Spam filtering solution for iPhone and a question.
I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
ThanksIs it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
not at present time -
I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!
If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup. -
Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816) -
I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by SponsorI'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
Maybe you are looking for
-
hi friends, have 1 issue in script i have the code in my script: /: PERFORM F_SO_DATA IN PROGRAM ZZZFR0021F USING &P_BUKRS& /: CHANGING &L_VAR& /: ENDPERFORM and then in the prog.
-
When I attempt to upgrade an app in iTunes for windows, I get an error: "Could not purchase. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later" I am running the latest iTunes 10.7.0.21 for Windows 7
-
Urgent problem in connecting servlet and oracle
Hi I have problem in connecting servlet with oracle.Kindly let me know what all the classes i should include in classpath to get connected.Where will i find the oracle driver.Kindly help me to do this. With regrds Vaiju
-
Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add or amend a rule, such as "delete incoming" I have to go through the entire list to find it. I have tried clicking on the heading
-
Ok so here's an easy one for you lovely people. I have a need to run a report that will show all the new Oracle users created from Jan 1, 2007. I'm not sure where I would pull this information from. Anyone have any ideas? Thanks. Luke