MPE Utilization report vs In Session monitoring

I have MPE 2.1.1.2. We have 25 voice ports and 20 Web ports. Today when I go look at the utilization report for voice it says 100% scheduled and 10% utilized. At the same time I look at the in session monitoring and count 15 ports in use for voice. Is there something I need to correct for reporting or is it broken? Thanks
Donnie

Hi Donnie,
Just a thought here
The Port Utilization report looks at this usage over a specified period of time
(I believe the default is 9 hours) so over the 9 hours (in my example) the Voice
Ports used vs scheduled average was 10%.
The Session monitoring is a "real time" look at the port usage. When you checked
the Ports being used were 15/25 but throughout the Reporting period that is referenced
in the Port Utilization Report (above) this was not the case. You might want to tune the
parameters for the start/end times in the Port Utilization Report to reflect the most
accurate data.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express%2C_Release_2.x_--_About_This_Page:_Port_Utilization_Report#Output_of_the_Port_Utilization_Report
Cheers!
Rob

Similar Messages

Generate Prime Interface Availability and Utilization Report for unified APs

Hi,
I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
thaks for your help.

Hi Alejandro,
Did you solve this problem? Or is it a bug?
I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
and then I create a report for interface utilization.
But it display nothing when the report run finished.
I ask some guys in this forum, they said maybe it's a PI2.1 bug.
BR
Frank

Capacity Utilization Reports no data

Hi all, starting a new thread as none of the similar threads have been able to resolve my issue.
We have System Center 2012 SP1 on Server 2012, SCOM VMM, SM, Orchestrator, App Controller etc.
When I run the Capacity Utilization report I only have data returned for PIF, Net transfer, Capacity Utilization and Dick IO all return;
No data available. Possible causes include::
The performance rules for the report have not been enabled in the VMM Reports MP.
No computers match your selection criteria.
I am adding the Hyper-V host to the report, I have also added the Windows server objects to the report.
The SCOM host has the execution policy set to Unrestricted as per one post I have found. Pro Tips do work when tested.
I did find this blog :
http://blogs.technet.com/b/rexzh/archive/2013/08/20/scvmm-2012-sp1-capacity-utilization-report-missing-data.aspx
But where do we locate the stored procedures?
If I look at the monitoring views I see performance data against the Hosts.
Please assist

Hi,
Please run the following command on the management server.
set-executionpolicy Unrestricted
If the issue persists, I suggest you post in VMM forum to get more insights.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=virtualmachinemanager
Niki Han
TechNet Community Support

Regarding Link Utilization Reports

Hi All,
I have installed Whatsup gold version no 11 to Monitor Network as well as Server devices. My query is im not able get Internet link reports even i don't know how to configure Router to get Link Utilization Reports and what need to configure on router to enable this Service. Kindly help me to achive this Challenge.
Farook

Hi All,
I have installed Whatsup gold version no 11 to Monitor Network as well
as Server devices. My query is im not able get Internet link reports
even i don't know how to configure Router to get Link Utilization
Reports and what need to configure on router to enable this Service.
Kindly help me to achive this Challenge.Farook
Farook,
You need to configure snmp server ip address (what's up gold ) in router with community sting which is configured in server.Check out the below link for insatllation guide on whatsup gold for help !!
http://docs.ipswitch.com/NM/87_WhatsUp%20Gold%20v14.1/02_Guides/WhatsUp%20Gold%20v14.1%20Getting%20Started%20Guide.pdf
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Prime Infrastructure (2.0) utilization report on port group possible?

Hello
I want to create an interface utilization report for a specific port group in PI, but can't see how to do that in the report setting. You only seem to be able to select a specific device or site rather than port group. Is it possible? Also, is it possible to put that on a dashlet?
thanks for your help

Thanks for that Mahavir
Yes, I worked that out a little while ago, and can now see interface utilization by port group on the Performance > Network Interface page. I do have another question however (well two)....
I wanted to add graph over time for the utilization to the detail dashboard, but nothing shows up, even though I see the utilization in the network interface page, so I'm sure the monitoring is deployed. Why is the data missing from the graphs?
Also, I wanted to see interface packets per second graphs, but see that is not part of any default template, so I created a customer SNMP template from the IF-MIB to do this, but I can only deploy that against sites/devices or a list of interfaces, and not port groups. Why can't I deploy a customer SNMP template against a port group?
thanks for your help

Server Utilization report (for processor) for business hour is incorrect

Hi,
We are using SCOM 2012 SP1 UR3 in our environment.
Recently got a query from one of the team that the processor utilization report is incorrect for business hours.
First I pulled a SCOM report (Performance by Utilization) for business hours say 1st Feb to 15th Feb processor.
Then I pulled a Raw report from SQL DW targetting % Processor time , exported it to excel & filtered it for the same duration which gave an average value of 86% for processor.
Finally, also pulled the same data from default report (Operating System Performance) under Windows Server 2008 Operating System which also gave me an average value of 86%.
To summarize Performance by Utilization does not calculate the accurate business hours & needs to be corrected.

Hi,
Here is a related blog for your reference.
OpsMgr: MP Update: New Base OS MP 6.0.6989.0 Adds support for monitoring Windows Server 2012 OS and fixes some previous issues.
http://blogs.technet.com/b/kevinholman/archive/2012/09/27/opsmgr-mp-update-new-base-os-mp-6-0-6989-0-adds-support-for-monitoring-windows-server-2012-os-and-fixes-some-previous-issues.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create a site utilization report for SharePoint Site with these conditions

HI,
How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
a) The list of users who are accessing the site
b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
c) When was the last date the user has accessed the site

Hi Kalpana,
Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
You can get site collection / sub site user details via
SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
Let us know if this helps
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Daily report for user sessions in oracle10g database

I would like to genarate the daily report for user sessions in oracle10g database
daily report of how many of sessions present in oracle database for each user

Thanks for link ( I know you always post the oracle document link here)
But I am expecting scripts( someting like logon trigger and logg off trigger) to genarate the user session report.

Capacity utilization report (Labour)

Hi
We are developing workcenter capacity utilization report.
We have taken available capacity from KAKO table and function module.
Actual finished set up hrs we are taking from AFRU -ISM01/ILE01
My issue is for capturing confirmed set up hrs AFRU is the correct table or any other table is there.
when i am testing some production orders set up time values are not flowing into the developed report.
In which table we can see confirmed set up/processing times etc.
regards,
srihari.M

Dear
Check the Work Centre assingin in the operation overview screen -then double clcik on this -Goto Work Centre Basic data Tab -Check the Standrda Value Key -Stndard value drives the three Setup , labout , machine to be entre or must be entred or not .
If Rule for maintainec is not for Set up , then this will not come up in Confirmation screen also and hence in your customised report .Or you may be having Set up hrs which have not confirmed yet .Based on this SVK , you will choose the Formula key for Scehdule , capactiy and also Csoting tab to calcuate the same.
Check this and come back
regards
JH

Is there any report On Goods Movement Monitoring in Standard SAP ?

Is there any report On Goods Movement Monitoring in Standard SAP ?
Please send me.

Hi,
You can use MB5B for checking goods movement in a particular plant.
Regards
Noopur

What is the "Main Attribute" for in Session Monitoring?

Anybody know what the "Main Attribute" column is for in session monitoring or how
I can use it?
Can't find it mentioned anywhere.

Does this actually work in WLS 6.1 SP1 ? I have session
monitoring enabled, have set the ConsoleMainAttribute to
"username", and have actually set an attribute with that name
to a string value in each session, but still get null returned
from getMainAttribute() on ServletSessionRuntimeMBean. Any
information, hints, advice, or vague prophecies on how to
successfully use this API would be appreciated.
--matt
Mihir Kulkarni <[email protected]> wrote:
The Main Attribute in the console is mapped to the ConsoleMainAttribute
in the
weblogic.xml file.
This attribute specified as follows in the weblogic.xml:
<session-param>
<param-name>ConsoleMainAttribute</param-name>
<param-value>mySession</param-value>
</session-param>
As per: http://e-docs.bea.com/wls/docs60/programming/weblogic_xml.html
If you enable Session Monitoring in the WebLogic Server Administration
Console, set
this parameter to the name of the session parameter you will use to identify
each
session that is monitored.
This parameter can only be a String in WLS 60. In 61, this parameter
can be an Object
and its toString method will be called to display its value.
cheers,
Mihir
Steven Job wrote:
Anybody know what the "Main Attribute" column is for in session monitoringor how
I can use it?
Can't find it mentioned anywhere.

LMS 4.2.3 Query on Interface utilization report

Hi All,
Interface Utilization report displays the interface utilization data for each device polled for the Interface Utilization
template. The information is presented using the percentage specifier.
For eg its displayed % (Rx Max%,Rx Avg%,RxMin%,
Tx Max%,Tx Avg%,TxMin%)
I wants report should have the data(interface utilization In Bytes of data)
Can we display the data instead of the percentage?? is it possible ???
Regards,
Channa

Hi Channa,
log into dbreader using the following::
http://servername : 1741/dbreader/dbreader.html
or
https:// servername : 443/dbreader/dbreader.html
user Id is DBA
Database Name is upm
password :: user defined (by default password is c2ky2k)
1. Here is the query to get the pollerwise managed MIBObjects:
"select count (*), PollerName from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId = b.PollerId and b.Poller_State NOT IN (1) Group by b.PollerName;"
2. Here is the query to get the total mibobject count for the active pollers
“select count (*) from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId =
b.PollerId and b.Poller_State NOT IN (1);”
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Unable to generate CUSSM Trunk/PRI Utilization Report

Dear All,
We want to generate Voice Gateways E1 Utilization report from CUSSM 8.5. I have configured CUOM 8.5 and CUSM 8.5 but i am unable to get the date for number of active calls and % utilization/PRI.
Thanks in Advance.
Hassan

Well i have done a little reading and found out that CUSSM 8.5 gives trunk utilizaition but only for MGCP Controlled Gateways. Reverting back to version 1.3
Hassan

How to set report output to session variable

Hi,
Is there any way to set report output to session variable . If my report returns 1 row and 1 column.
I have a dashboard prompt where i am selecting Name , but i want to find out the ID of that name .
that ID i want to pass to a column Fx , to achieve this i created a intermediate report and i got the ID. Now my problem is how do i set this ID in session variable .
Please help if anyone knows...

Did you read this:
how to set session / presentation variable in repository variable
Dashboard prompt on Month Name but report filter on month ID:
Re: Dashboard prompt on Month Name but report filter on month ID needed
If you have dashboard prompt (name) then you may have only one report that is filtered by name but show id or not show id but use id in the function. Or two reports like in the solution in the second link above and the second report has id in the function and filter by id from the first report. You don't need to set this ID in session variable for this example.
Please close your previous threads if they are answered.
Regards
Goran
http://108obiee.blogspot.com

LMS 4.2 specific interface utilization report

Hi,
is there a way to create a interface utilization report only for a specific port? Like switch1->interface fa0/10
Right now i can only choose all ports from a device?
Thank you.
Chris

So, the new weekly report does not show the high Utilizations anymore, but there is a new problem:
In the "Report Details", there are 7 devices and 126 interfaces, but in the "Interface Utilization Summary", there are only 49 Interfaces.
I have added a screenshot, so that you can see, what I mean.

MPE Utilization report vs In Session monitoring

Similar Messages

Maybe you are looking for