Mpeg 2 conversion for FCPX
I trust this question is still germane in this discussion group:
I'm following the advice of some of you to get MPEG streamclip to faciltating ingest into FCPX. However it says I have to buy a component. After going to the Apple website suggested (see screen shot), I'm unclear about WHICH component to buy. Help?
You need this one.
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
Be sure to follow the instructions in the MPEG Streamclip website for how to install it in Mountain Lion. You must get the Beta version of MPEG Streamclip and use the installer for the QuickTime MPEG2 Playback Component that comes in the MPEG Streamclip DMG.
Similar Messages
-
Mpeg conversion for AFTER EFFECTS
Hey guys
I recently captured some HD video from cam in premier and it will only give me an mpeg file. Unfortunately this file is useless for after effects. What are the best settings i can use to convert this file with out losing quality?Interesting.
I am running after effets cs4 on a pc. I shot on a Sony HDR FX1 and captured of a little Canon HD camera because the fire wire stopped working on the Sony cam. If there is a way to get this mpeg working in after effects that would be great.
Here is a link to to a pic of the message i get.
http://remmachine.com/client_trans/sample.PNG
The after effects manual does not list mpeg as a supported format:
http://livedocs.adobe.com/en_US/AfterEffects/8.0/help.html?content=WSB108BC99-A69B-46c4-86 D3-2192805C2AF8.html
Also if you check the links below i am not the only one that experiences this problem.
http://www.mfhughes.com/writing/sony_mpeg_editing.htm
http://www.videoforums.co.uk/adobe-premiere-premiere-elements-after-effects/19161-how-i-im port-mpg.html
Thank you. -
PAL to NTSC Conversion in FCPX
Hello
My friend has Hi 8 Video tape in PAL. Any ideas on how to best capture in FCPX? Will FCPX transcode the video to a North American format? I'd like to store it on an external Hard Drive for furture editing. I do have a Canopus ADVC 100 for the analog to digital converstion. Any ideas would be most welcome.
Thanks
CarlHi all
Tom I have found a PAL camcorder. it's in rough shape, but it works. I intend to power-up the camcorder, insert tape, RCA out to RCA in on a Canopus AVDC 100, FireWire out to iMac FireWire in. I'm a bit worried about the conversion and capture process. Should I use FCPX, QT Pro, or MPEG Streamclip for capture? Any advice on the PAL conversion to NTSC - codec?
Thank you all in advance for helping.
Regards
Carl -
What is the best video converter for high quality MPEG-4 for Apple TV?
What is the best video converter for high quality MPEG-4 for Apple TV?
Handbrake won't convert AVI files, But there are many more than those mentioned that will
The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
Message was edited by: Winston Churchill -
HT4664 What is the best graphics card for FCPX?
In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
"Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
Apple lists this card on its support page: http://support.apple.com/kb/HT4664
So,
What is the best graphics card for FCPX?Ben,
Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations. -
Unit of measure conversion for CIN is not relevant for pricing
During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. VDear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra -
What are the special conversions for time in update rules?
What are the special conversions for time in update rules?
Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo -
Sales Order Conversion for Go-Live
Folks,
I would like to get your expert thoughts on sales order conversion for go-live. I will give my thoughts below and would like to see if you can extend them and make this better.
1. The environment is this: the order entry systems are several external systems interfacing with SAP CRM. Therefore, there are two options to bring the sales orders to SCM: i) Use the same interface (BAPI_APO_AVAILABILITY_CHECK that is called from CRM) and create the orders, or, ii) Create the sales orders in ECC and then use the sales order integration model. Note that this is the only time sales orders will come from the ECC system. In steady state, they will come from CRM and based on the SPM scenario that SAP has enabled, they WILL NOT be replicated in ECC
2. Ensure that all deliveries in the system have been executed. That is, there is no stock that has been assigned to a delivery and the delivery has not been shipped. If this is not the case, you have to bring the deliveries into the system also. So, to clarify, no outstanding deliveries will be brought into the system as part of the conversion.
3. Sales order fields related to BOP will be populated through program or by other means. This is implementation specific. Some example fields are: i) Sales Org, ii) Delivery Priority, iii) Shipping Conditions on the header, iv) Transportation Zone of customer, v) Ship-to Party number, etc.
4. Run BOP for all the sales orders based on the criteria that has been defined for this conversion. Note that the criteria for the conversion could be different from the criteria that we will use for steady state.
Could you add any missing steps?
Thanks,
Satishthanks nitin
i would like to use it as prepayemnt itself
but when i am trying to load using oe_payments base table it loads
but when i use data and use in oe_payments_iface all it doesnot load after i run the order import program
can u plz suggest me where i am going wrong
thnaks -
Can anyone Explain about Data conversion for Material master In SAP MM
Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
ThanksHi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc] -
why is adobe requiring me to make a purchase in order for me to create a pdf from word? I paid for the service in April which included unlimited conversions for a year
Make sure you're actually logged-in to your account.
-
File Content Conversion for Unequal Number of Columns
Hi,
Iam following this thread FCC for Unequal Number of Columns.
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
when iam doing ,iam getting an error
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'TOTALSET.fieldFixedLengths' or 'TOTALSET.fieldSeparator' is missing Consistency check: no. of arguments in 'TOTALSET.fieldFixedLength' does not match 'TOTALSET.fieldNames' (0 <> 1)
My conversion parameters are
Recordset Structure : TOTALSET,*
TOTALSET.fieldNames : ITEMSET
ignoreRecordsetName : true
TOTALSET.fieldSeparator : 'nl'
My file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
Please help in resoving the error.
Thanks in Advance
SrinivasHi Srivinas,
your file structure is as below
01,021000021,G4886704,080919,0742,001,,,2
02,G4886704,021000021,1,080918,0742,,2
03,000000135073477,,010,105303839,,,015,489113155,,,045,489039455,,,072,73700
So it's easy, you have to use KEYFIELD option, coz you have something like that :
Line 1 : keyfield = 01 following by a limited number of columns (e.g 30 fields for Structure1)
Line 2 : keyfield = 02 following by a limited number of columns (e.g 14 fields for Structure2)
Line 3 : keyfield = 03 following by a limited number of columns (e.g 23 fields for Structure3)
Thanks to the Keyfield, you define a field which is present in each line that you can used to distinguished the different structures of lines. In your case, it seems that the keyfield is the first column (01, 02, 03).
Try to use that:
Recorset = TOTALSET (and don't use option "ignoreRecordsetName : true")
Recordset structure =Structure1,1,Structure2,(star),Structure3,(start) (the difficulty will be to find the good use of "*" and "1", but after some tests you will find the good one).
Note: replace (start) by the character " * "
Key field value = keyfield
Key field type = String (case sensitive)
Structure1.fieldNames = keyfield,field2, field3 etc.. of Structure1
Structure2.fieldNames = keyfield,field2, field3 etc.. of Structure2
Structure3.fieldNames = keyfield,field2, field3 etc.. of Structure3
and then you will have a XML like that:
TOTALSET
Structure1 and all its fieldN
Structure2 and all its fieldN
Structure2 and all its fieldN
Structure3 and all its fieldN
Structure3 and all its fieldN
TOTALSET
Structure1 and all its fieldN because I used Structure1,1
Structure3 and all its fieldN
Regards.
Mickael
Edited by: Mickael Huchet on Apr 20, 2009 5:18 PM
Edited by: Mickael Huchet on Apr 20, 2009 5:19 PM -
Hierarchy on file content conversion for receiver?
Y'all,
I'm stuck in this problem and I haven't find a solution to solved it... so, all your clues and reply's are really appreciate...
The basic problem is a File content conversion for a receiver C.C. that is not working and it's raising some errors in the RWB, I have gone thru some blogs but I still having a lot of doubts...
I want to produce a flat TXT file that will have a line for every node or subnode, it doesn't matter if it's not represented as hierarchical structure like this one... but the records must be produced or written in the same order...
Man_Del_Header as main node with Man_Header, Delete_Detail and Trailer as subnodes...
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_DISTRIBUTOR_DELETE xmlns:ns1="http://xxx.com/xi/POSout">
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>051</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>051</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005010</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005011</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00005</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00002</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
<Man_Del_Header>
<MD_Header>|HM|1|</MD_Header>
<MD_StoreNumber>061</MD_StoreNumber>
<MD_filler1>|2|0000|3|</MD_filler1>
<MD_EffDate>09/17/07</MD_EffDate>
<MD_filler2>|4|005|5|dsdvnd|7|</MD_filler2>
<MD_BatchNumber>500</MD_BatchNumber>
<MD_fiiller3>|8|</MD_fiiller3>
<MD_BatchDescr>DELETE PREV CST BTCH</MD_BatchDescr>
<MD_filler4>|10|D|</MD_filler4>
<MD_linef>1</MD_linef>
<Man_Header>
<Man_Header>|HM|1|</Man_Header>
<Man_StoreNumber>061</Man_StoreNumber>
<Man_filler1>|2|0000|3|</Man_filler1>
<Man_EffDate>09/17/07</Man_EffDate>
<Man_filler2>|4|005|5|dsdvnd|7|</Man_filler2>
<Man_BatchNumber>500</Man_BatchNumber>
<Man_filler3>|8|</Man_filler3>
<Man_BatchDescription>Delete Distributor</Man_BatchDescription>
<Man_filler4>|</Man_filler4>
<Man_linef>Constant</Man_linef>
</Man_Header>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005012</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005013</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Delete_Detail>
<Delete_Detail>|D|901|170|</Delete_Detail>
<Delete_DistribNumber>0000005014</Delete_DistribNumber>
<filler9>|</filler9>
<delete_linef>1</delete_linef>
</Delete_Detail>
<Trailer>
<Trailer>|T|1|</Trailer>
<TotalRecCnt>00006</TotalRecCnt>
<filler1>|2|</filler1>
<NoOfHeaders>00002</NoOfHeaders>
<filler2>|3|</filler2>
<NoOfAdds>00000</NoOfAdds>
<filler3>|4|</filler3>
<NoOfChanges>00000</NoOfChanges>
<filler4>|5|</filler4>
<NoOfDeletes>00003</NoOfDeletes>
<filler5>|13|</filler5>
<NoOfSubstitution>00000</NoOfSubstitution>
<filler6>|</filler6>
<linef>1</linef>
</Trailer>
</Man_Del_Header>
</ns1:MT_DISTRIBUTOR_DELETE>
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|051|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005010|1
|D|901|170|0000005011|1
|T|1|00005|2|00002|3|00000|4|00000|5|00002|13|00000|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|DELETE PREV CST BTCH|10|D|1
|HM|1|061|2|0000|3|09/17/07|4|005|5|dsdvnd|7|500|8|Delete Distributor|Constant
|D|901|170|0000005012|1
|D|901|170|0000005013|1
|D|901|170|0000005014|1
|T|1|00006|2|00002|3|00000|4|00000|5|00003|13|00000|1
So as you can see, i wanna produce a flat file that will have line or record for each node, it doesn't matter that it has a hierarchy or a deeper level, it should be a simple flat file...
The thing is that i have been trying to setup the receiver comm. channel and it's raising some errors like Could not process due to error:
<i>java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'XXXX')', probably configuration error in file adapter (XML parser error)'</i>
I have checked this blog:
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
Unfortunately i don't know if there's another way to achieve this...Jerry,
it easy if you go with multi mapping concept and without BPM if you are above >XI3.0 SP14.and use Append mode in the receiver file adapter.
just create the target structure like root under that Man_Del_Header,Man_Header,Detail,Trailer at the same level but got be careful with occurences.
<b>Source:</b>
I think from your structure you have
Man_Del_Header (1-unb)
Man_Header (1-1)
detail (0-unb ) may be (1-unb)
trailer (1-1)
create <b>target DT</b> like:
ROOT
..Man_Del_Header (1-1)
..Man_Header (1-1)
..detail (0-unb ) may be (1-unb)
..trailer (1-1)
all are at same level under ROOT.
create MT,MI,MM,IM.
in MM just map correspoding fields and if you have any unbounded onces map the nodes too. and map Man_Del_Header in the source to MT_XYZ (important)
and in the MM go to MESSAGES tab and change the occurences of the target Message to 0-unbounded same way in the interface mapping 0-unbounded.
here it create anothe extra node in the mapping something like Message1,this is ok.
and in ID just create all other objects like as usual except creating Interface determination ,in that select the extended radio button.
in reciever File CC use FCC ,would be very simple in the recordsetstrcture give
your four nodes Man_Del_Header,Man_Header,Detail,Trailer.
and use either fixed or field seperator.use append mode in recv File CC otherwise it will generate files as many occurences your source "Man_Del_Header" has ,cos we are mapping it to the MT--xyz .
thats it you are ready to go...
if any error post back here again.
you can make use of this thread
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible (here there are two target DT ,but you just create one DT,remaining are similar)
good luck.
Babu -
Content conversion for multilevel varying structure File to Idoc
Hi All,
I have following file structure.
VO
C1
S1 1 to unbounded
H1 1 to unbounded
D1 0 to unbounded
D2 0 to unbounded
U2 0 to unbounded
UC 0 to unbounded
My Idoc structure.
ISU_EL34
IDOC 0 to unbounded
E1ISU34 1 to unbounded
ZSEGMENT 0 to 1
I have applied the content conversion for the length specific file as follows.
Recordset structure: VO,1,C1,1,S1,1,H1,1,D1,,D2,,U2,,UC,
Do I need to do any changes over here to satisfy the above file structure.
V0 and C1 occurs only once in a file.
for S1 I should have H1 compulsory and others are optional, but i need to create Idoc when D1 data is available only.
I'm able to read the total file with the above content conversion.
MY requirements:
1) I need to create the Idoc based on the occurance of D1 node. I'm using H1 data also in the idoc not S1.
2) My doubt is whether the content conversion I have provide is applicable to the structure I have prepared.
3) When I'm trying useOneAsMany function for the above ie H1 data should repeat in Idoc as and when D1 repeats.I'm failing the error is both queues are not contain same number of data..
Could anyone suggest how I should approach for the above scenario.Hi Sravya,
It is really helpfull answer , Thanks for sharing my problem .
It worked for this purpose, but I'm facing following problems
MY scenario
The file contains records V0,C1,S1,H1,D1,D2,U2 and Uc
In which Im using the data of H1,D1,D2,U2 and UC for creating target Idoc.
Every H1 contains at least 1 D1 record, If D1 exists D2 ,U2 and UC may or may not exist.If exists those are in a sequence and should consider the data of them to create Idoc.
Idoc should be created for every D1.
Problem facing:
Do we have any mechanism to group the D1 records to the relevant header.since Im unable do this with content conversion.
I think bcz of above problem; some records (D2 & U2 & UC) data is populating in Idoc even there is no D2,U2 and Ucs.
Thanks,
venu. -
Query on Content conversion for Receiver SFTP Adapter
Hi Experts,
We have the receiver structre as follows:
<DT_Receiever>
<Header>
<field1>abc<\field1>
<field2>1234<\field2>
<\Header>
<Detail>
<field3>nhj<\field3>
<field4>bshsrt<\field4>
<\Detail>
<\DT_Receiever>
We should do content conversion for the above structure using SFTP adapter at the receiver end.
Kindly provide us some tips in achieving the same.
Thanks
Suganya.Hi Suganya,
You can use message tranform bean for ur case.
U have to use "StructXML2Plain"
Please follow below link for ur reference If you face any problem please let me know....
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Thanks,
Enivass -
Data Conversion for Project Module
Dear all,
I have a requirement to perform data conversion for Project module from 11.5 to R12. I am new to this module. Can anybody can outline (or provide documentation reference):
1)Source tables in 11.5
2)Data Selection for source tables in 11.5
3)Validations need to be performed for data clean up
4)Interface tables and interface programs in R12
Thanks,
SudipSee the following links for information on all R12 interfaces
Oracle Integration Repository Documentation Resources Release 12 (Doc ID 396116.1)
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
If you are on 11i, go to irep.oracle.com
Hope this helps,
Sandeep Gandhi
Maybe you are looking for
-
Neo4 Plat SLI using SATA Raid cannot install WinXP 32
I recently purchased the neo4 platinum and was quite amazed what all comes with the board. However, I have spent quite a while trying unsuccessfully to get winxp installed. I was previously using a pci rocketraid card to run my 2 maxtor drives as a s
-
I have lightroom 4.4 for mac and I am wondering how I delete watermarks?
Every time I export photos and change water mark it asks me to save so I accumulate a lot of watermark files and I need to delete some. How do I do that?
-
I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back
-
Hello all! I need your help! I have soon a deadline in Java Programming and I have to get the data from the MySQL Database into the jtable. The data has to be editable, so I need a TableModel, which extends AbstractTableModel. There is a perfect exam
-
Core, Community and Database missing errors
I'm installing using the mid December install disc and whenever I install the base system, use pacman -Sy or pacman -Syu i get this error, then it continues: warning: database file for 'core' does not exist " " " 'extra