Mpeg files from cd to Final Cut

gotta do a DVD for this guys presentation, and he wanted bits of writing between these clips of drink driving accidents, and gave me a cd with all the clips on.. i imported them (quicktime mpegs) in to FCE, and they play back but without sound...i can't think whats wrong..when i play back in quicktime the sounds fine! any help would be appreciated - gotta get it done for tommoro
IMac G5 Mac OS X (10.4.6)

when i open it in quicktime (the default quicktime, dont know if its pro or not..) it plays fine..um, not sure about codecs etc, they play in a small window within the final cut window and the image frame has to be increased to make it fit, if thats any help...i dunno whats wrong, they're just mpgs! come to think of it though, i've downloaded mpg stock footage before for a music video, and there was no sound then either but that didnt matter because there was music going over the top of it..
IMac G5 Mac OS X (10.4.6)

Similar Messages

Transferring files from EXDCAM to Final Cut Pro

I figured out how to create Final Cut Pro copmatible files using the Clip Browser software that caem with my Sony PMW-EX1R camera but when I click on the clips I get an "out of memory error" message. How do I solve this problem? Please contact me directly at [email protected] because I don't come to this forum often.

http://www.sonybiz.net/biz/view/ShowContent.action?product=PMW-EX1&site=bizenEU&category=XDCAMCamcorders&contentId=1214313427691&sectiontype=Product&preserve Context=true

How do you import music from itunes to Final Cut Express 4?

I tried dragging and dropping the file from itunes to Final Cut Express, but that doesn't work, so I tried to import a file using the "import file" and that didn't work either. Then I found the original file using finder, and dragged it into Final Cut Express, which did put the file there, and I can hear the audio in the sample player, but when I try to play it in the sequence, this weird beeping happens. Any help?

jpaulholl wrote:
Then I found the original file using finder, and dragged it into Final Cut Express, which did put the file there, and I can hear the audio in the sample player, but when I try to play it in the sequence, this weird beeping happens.
The beeping is relating to audio you have placed into your sequence that doesn't match your sequence settings, therefore needing to be rendered.
Here is an article for iTunes to FCE http://docs.info.apple.com/article.html?artnum=93165 and here http://docs.info.apple.com/article.html?artnum=93463 that should aid with addressing your current audio woes.
Enjoy.

Convert mts files for editing in Final Cut?

Is there a way to convert mts files for editing in Final Cut Express or Pro?

Well, first, if you are talking about AVCHD video, FCE & FCP can directly import it from your camcorder. They will also import AVCHD from an SD card or even your hard drive provided you have saved the entire AVCHD folder structure, not just the .mts files by themselves.
If you only have the .mts files (without the surrounding AVCHD folder strucutre) then you should be able to use MPEG Streamclip to convert them to QuickTime/Apple Intermediate Codec for editiing in FCE. MPEG Streamclip is free and works great.
If that doesn't work, then look into ClipWrap, which has a $49.99 price tag.
This will work the same for converting .mts files to ProRes assuming you already have FCP installed, which gives you the ProRes codec.
FCE & FCP do not, however, directly import video from DSLRs because the camera manufacturers have each done some proprietary stuff in their implementation of video in their DSLRs. However, if you have a Canon DSLR & FCP (that is, FCP 7) there is a Canon EOS video plugin that will enable you import the video directly from the DSLR into FCP7. Not sure it's supported on Lion (10.7.x) just yet, but if you have a Canon DSLR it's worth a look.

I can't import any files or folders into Final Cut Pro 7.0.3 projects

I can't import any files or folders into Final Cut Pro 7.0.3 projects. When I select import and then either files or folders, I am able to navigate to the drive where the media is being stored, but then when I scroll to locate the files or folders the drive disappears. This problem began as an intermittent problem, but now I cannot import any files or folders. This problem started when I upgraded my operating system to Yosemite version 10.10.2 on my mid-2010 Mac Pro running with 16 GB of memory and an ATI Radeon HD 5770 1024 MB graphics card. Can anyone help me figure out and solve this serious problem? Thanks!

Then just drag the files/folders from your hard drive into FCP. Don't use the IMPORT option...just drag and drop.
The problem started when you installed an OS that doesn't support FCP 7. So if you want things to work smoothly, it's best to go back to an OS that did support FCP 7. Yosemite was written without taking FCP 7 functionality in mind, so it isn't fully functional. It might not do one thing for someone...but works for you in that respect. But then you can't do something else. The ways it doesn't work is always random. Or it might work great for some people, because they don't use functions that might no longer work....so they don't notice it.

Self Contained Final Cut Pro Export Files unreadable in New Final Cut Pro 7

Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.

VideoJunkie88 wrote:
Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.
Hi VideoJunkie
I have not come across this. However, my previous FCP 6 Self-Contained Exported ProRes 422 standard (not HQ) files which are actually 1440 x 1080 will only playback in the new QT version 10 using that aspect ratio (whatever the actual screen ratio is at 1440 x 1080, I'm not sure, but the video width is squashed together... I suppose it has something to do with showing it in square pixels versus rectangle... or do I have that turned around. I'm not sure, I have always been confused about the ProRes 1440 x 1080 format, all I know is it plays back properly in 1920 x 1080 when I transcode it for DVD or ATV, iPhone etc..). In any case, you need QT player 7 (standard or pro version) to display these files at the intended aspect ratio of 1920 x 1080. The old QT Pro player version 7 will let you change this in the properties window, but the QT 7 standard player will not let you (those options are grayed out) and the new QT X player doesn't even show these options (i.e totally unavailable).
Also, these previous files will play just fine (for me anyway) in FCP version 7. If you having a different issue where they will not play at all, then I'm not sure how to help you, but I just wanted you to be aware that my old self-contained files from FCP 6 do work (for me anyway) in the new FCP7 under Snow Leopard.
(ADDED) I must ask, what codec were your previous exported self-contained QT movies? Do you have this codec on the commuter your trying to play your old master self-contained exports on?
Ron
Message was edited by: videocrafter

Moving from Linux to Final Cut Pro, Need Help Creating Same Mpeg-4 videos

I am seeking to move into Final Cut Pro to develop these types of videos that I have previously been creating in Linux.
How can Final Cut Pro make these videos in the format specified below (OR VERY CLOSE TO IT)?
Please let me know what settings with screenshots, etc. will make final cut pro output in this way.
MINIMUM output requirements Video codec: Mpeg-4 (divx) with 2400 vbitrate, Audio Codec: MP3 and File container .avi
I look forward to your help, below are the details I've used in Linux, so please help me create these videos using Final Cut Pro.
I need this information by the end of the week.
Thanks!
To Convert from a captured uncompressed video to MPEG-4 (Divx) with MP3
audio at 2400 bits using mencoder
http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html
mencoder -ffourcc divx capture002.avi -oac mp3lame -ovc lavc -lavcopts
vcodec=mpeg4:vbitrate=2400:v4mv:mbd=2:trell:cmp=3:subcmp=3:mbcmp=3:autoaspect:vp ass=1
-vf harddup -noskip -mc 0 -o test.avi
-------------VIDEO ------------
Video Encoded to Codec (MPEG-4) with ffourcc divx (divx4)
Video Bitrate = 2400 (vbitrate=2400),
Allow 4 motion vectors per macroblock (slightly better quality) (v4mv)
Motion estimation=2 (mbd=2)
Trellis searched quantization. This will find the optimal encoding for
each 8x8 block. Trellis searched quantization is quite simply an optimal
quantization in the PSNR versus bitrate sense (Assuming that there would
be no rounding errors introduced by the IDCT, which is obviously not the
case.). It simply finds a block for the minimum of error and lambda*bits.
(trell)
Sets the comparison function for full pel motion estimation (cmp=3)
Sets the comparison function for sub pel motion estimation (subcmp=3)
Motion Search Algorithm (mbcmp=3)
Same as the aspect option, but automatically computes aspect, taking into
account all the adjustments (crop/expand/scale/ etc.) made in the filter
chain. Does not incur a performance penalty, so you can safely leave it
always on. (autoaspect)
Activates internal two (or more) pass mode, only specify if you wish to
use two (or more) pass encoding. (vpass=1)
duplicate frames (harddup)
no skipping (-noskip)
------------- AUDIO ------------
Audio Encoded to Codec (MPEG-3)
------------- FILE CONTAINER ------------
File Container (.avi)
DOCUMENTATION FOR MENCODER
http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html#GENERAL%20ENCODING%20OPTIONS% 20(MENCODER%20ONLY)

I need this information by the end of the week.< </div>
Not likely.
Easiest solution is to produce your edited material in FCP and then move the fully rendered, self-contained movie, in whatever format you are producing, to your Linux machine and use its encoder/transcoder.
Compressor will do the job for MP3 and MP4 but you will need to purchase the DIVX codec or transport it to your Mac. You need to talk to DiVX and you need to open the manual for Compressor. Compressor is not easy to learn how to use i na day but whatever you were using on your Linux box was much more difficult to learn.
bogiesan

How do I convert .vob files to run in Final Cut Pro X?

Hi everyone,
I'm trying to convert Video_TS files (.vob) to work on Final Cut Pro X. I've tried a free trial of a couple of third party file converters which manage to convert the files to .mov or .mp4, but then when I drag and drop them into Final Cut Pro X it gives no video or audio. Any help would be really appreciated!
Thanks,
Josh

Did you do this from the MPEG Streamclip download page?
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion and Mountain Lion. Apple states the component is unnecessary in Lion and Mountain Lion, however MPEG Streamclip still needs it.
To install the component in Lion or Mountain Lion, please download MPEG Streamclip 1.9.3b8 beta above; inside the disk image you will find the Utility MPEG2 Component M. Lion: use it to install the MPEG-2 Playback Component in Lion or Mountain Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion and Mountain Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion and Mountain Lion. You don't have to install QuickTime 7.
Also read the information for Snow Leopard below.

What is the easiest way to convert .MTS files for use in Final Cut Express

I initially downloaded my Sony Alpha7 files into iMovie. As the production requires a little more professional software I then tried to import files into Final Cut Express. As these are now .MTS files what is the easiest way of converting them?

Hey Martin et al,
Related question...
After you convert files from M2TS or MP4 into something usable in FCE can you trash the original M2ts/mp4 files ?
I recently used Mpeg Streamclip to convert Mp4 into AIC for FCE for example..
Is there a general rule of when you have to save original files so everything works in FCE?
I'm running out of HD space.
Thanks a lot,
Al

IMovie Files Wont Work in Final Cut

So the newest iMovie update is really frustrating me. I usually capture all my video files into iMovie, then edit them in Final Cut Express. At first I couldnt find the .mov files that iMovie creates, until I went to the iMovie Library and went under Show Package Contents. I was able to transfer those files to FC, however when I try to play them in the viewer, all I get is a white screen. The audio works fine, but there is no picture. Similarly, when I tried to render the file to see if that corrected the problem, I got a message that said codec not found. The file appears to be a normal .mov file so Im not sure what to do to get it to work in FC.

"unable to initialize video deck",
Exactly what deck (make & model); how is it connected to your Mac; what FCE Easy Setup are you using?
It says it is saved in MPEG-2
That's a problem. FCE cannot edit MPEG2 video. You have to convert it to QuickTime/Apple Intermediate Codec or QuickTime/Apple DV. Where did this footage come from? If it's an HDV camcorder, you should be able to capture in FCE.
If you already have an MPEG2 video file, you can try using MPEG Streamclip (free) to convert it to QT. You will probably also need the Apple MPEG2 Component if you do not already have it (19.99 from Apple). Note that if your Mac has Snow Leopard or later there are special instructions for installing the Apple MPEG2 Component - see "Snow Leopard and MPEG-2 Playback Component" on the MPEG Streamclip website.

Software Updates Missing and File Not opening in Final Cut Pro

Hi Experts,
I am having trouble with Final Cut Pro. Here goes:-
I tried to load up a FCP file called "Overview" in Lesson One of the Apple Pro Training Series book called "Color". The file would not open and I got the following message alert in FCP:
"File's format is too new for this version of the application".
I am running FCP 6.0.1 and so went to check for software updates. I could not find any listed for FCP. I did a quick internet search to make sure and found there were indeed updates to 6.0.1.
So I guess I have 2 problems:
1. Why won't a file from a book that was published before I bought FCP work on my app?
2. Why can't I see updates for FCP in the Software Update application?
I am mega stuck with this. I have read of similar problems to mine on the internet but have found no solution. I hope that you will be able to help me out.
Thank you all,
Bob

Hi Nick!
Thanks for your reply. I feel kinda silly now but I have been continuously checking Software Update for 24hrs and I just got a new addition to the list which was called "Pro Applications Update 2008-05".
Seeing something new, I installed it and it upgraded my Final Cut Applications including FCP to version 6.0.5.
The file then opened.
I am truly sorry to have taken your time up. As when I posted last time Nick, you were very prompt and helpful.
All the best,
This problem is solved for me and I hope all the other people having this problem find this update as luckily as I just did.
Bob

How do I import an AVI file for use with FInal Cut Express

How do I import or use an AVI file with Final Cut Express?
Thank you. Do I need to convert my AVI file and what is the
easiest way to do that? Thank you.

You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

How to convert MTS files for capture in Final Cut Express 4

*PLEASE HELP!!!* While waiting to buy my iMac I saved my Canon Vixia HF200 AVCHD video clips on a PC with backups stored on an external HD. I transferred these to my iMac and they are in .MTS format. I can not open them in either iMovie or Final Cut Express 4. I gather I need to convert the files somehow. What is the best way to do this? _Thank you for your help!_

Here are your options now that you just have the files...
http://discussions.apple.com/message.jspa?messageID=9966355#9966355
http://discussions.apple.com/thread.jspa?threadID=2073767&start=15&tstart=0
As Tom said, next time import directly from the volume rather than copying the .mts files.

Exporting .Mov files at 24fps for Final Cut Pro 5

I work at an animation production house and we're trying to export .mov files from QT 7.1.2 at 24fps so they won't have to be rendered in a FCP project which is a 720p project with a frame size of 1280x720, we're experimenting with two codecs. We're using Motion Jpeg A and Photo Jpeg, selecting 24fps but for some reason they import into FCP 5 at 10fps. It's as though QT isn't outputting accurate 24fps .mov files. When I export .mov files from FCP they import back into FCP without having to be rendered. What's the difference between the ones exported from QT vs. the .mov files exported from FCP. We're using the exact same settings and files....? The reason we need to use QT to do this is because it needs to be a somewhat automated process (lots of stills to work with) and our PA's are working on Windows with QT only.

You should post your inquiry at Final Cut Pro section for better support. Anyway, Final Cut Pro does not always recognize the frame rate correctly, depending on which application (and possibly which codec) you used to compress video. For example, Snapz Pro X and Adobe After Effects don't get along with Final Cut Pro in this respect. Furthermore, compressing video in H.264 will be a bad idea. So simply adjust the size of Canvas so that it won't cover the whole screen. In this way, you can even replay video on Canvas and even send it for final production.

Bringing vector graphics from illustrator photoshop final cut express.

I'm having a heck of a time getting my logo from illustrator to photoshop to final cut express. It is squishing it. It looks jagged in photoshop. I am cutting and pasting from an eps file to a photoshop doc that is for film and video. I'm not sure what I'm doing wrong.
Thanks to anyone who has answers.

If you have a problem with working with Photoshop you probably want to go to the Adobe forums.
If you're placing the vector graphic in a Photoshop file make it whatever size you need it to be. You're video image is the square pixel equivalent of 720x540. If you need the logo to fill the frame from edge to edge then make it that size. If you need it smaller, make the PSD smaller.

Mpeg files from cd to Final Cut

Similar Messages

Maybe you are looking for