MPEG folder with .m2v files after build required?

When you build a project, I noticed the folder MPEG being created. does DSP create an MPEG folder with .m2v files?
Now, do you need this folder even after you BUILD the project. I don't understand why, the build folder is nearly 3GB as it is?

If there is a chance that you will have to make changes to your project, you should keep it.
Otherwise you can throw it out.

Similar Messages

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

Bridge CS4 freezes when I open a folder with avi files

Whenever I navigate to a folder with avi files, Bridge CS4 freezes. I have tried resetting my preferences, changing the file associations, but it still hangs. Both Windows and Bridge are set up to associate avi files with VLC Media Player. The files open and play just fine in VLC. I am running CS4 on a Win XP Pro machine. It used to not be a problem and I could play avi files in Bridge. I'm not sure when the problem started since I don't shoot a lot of video. Any ideas?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

Create folder with multiple files (was: folders)

Can you create a folder with multiple files and direct the page to go to the folder and then the reader can select the file they wish to choose? Example Council Mintes Folder with a file for each set of minutes. The hyperlink would open the folder and then the reader would select whch set of minutes they'd like to see.

You may not have access to it depending on your hosting company and plan, but if you did have the ability to change it you'd normally do it in the admin area of your hosting account which would update the proper files on your server.
You may also be able to do it manually, but the "how to" depends on the server type you are running.
EDIT: I'd still suggest using a server script (like the PHP I linked to) because the look of a directory with browsing turned on is pretty ugly and can't be changes since it's not a page on your site. With the PHP I linked to, you could have an actual page for your links, complete with your site's design, that simply lists the files from the specified directory. It's very simple to set up if you have PHP on your server.

I have configured PDF Genrataor in LiveCycle 2.5. When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen.

I have configured PDF Genrataor in LiveCycle 2.5. I have configured my watchedfolder endpoints.
When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen. What I see in in the OUT folder I see a pdf file with the foldername and pdf extension....
Can anyone suggest.......

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

What to do with .m2v file?

I want to burn this .m2v file that compressor output but when I go to put it into DVD Studio pro it says that "one of the volumes is still in use." This whole process is really really frustrating I just want to make a DVD. Please work!

A .dmg file is an image file. If you open it a new "drive" will appear on your desktop with the files the image file contains. Applications commonly come this way and you drag the application to your applications folder, or maybe you run an installer from the image drive. I am guessing that what is happening to you is the dmg file is appearing and then automatically (probably some setting on your browser) opening so you are also seeing the drive. The drive doesn't actually contain anything so you can drag it to the trash when you are done with it. It's the dmg file that contains the original files and once you have dragged those from the drive to your folder you will have made a copy by doing so and you can get rid of the dmg file too.

For some reason, my compression option is grayed out under "File" menu, and when I select a folder with multiple files, or multiple documents, and try to right-click or tap the mousepad with two fingers, I do not get a "compress" option available. Help.

I don't know why, but when I select a folder with multiple docs contained within it, or multiple files, the Compress option is grayed out under the File menu, nor is it available when I right-click. Please help.

Yes it is, but I have the same problem of the option does not appear with "right click" (I'm actually control-clicking), and COMPRESS is grayed out under the file menu. I'd like to fix it.
Hmm. After finding the Archive Utility,* I tried archiving the folder. It came out as .cpgz, ugh. Found there was a preference to make .zip the default. It worked!
And now…the menus are not grayed out. ?!?! OK.'
Hope this helps someone.
*You cannot find this via search, apparently it is a hidden file, you have to click from the root drive through to /System/Library/CoreServices (Thanks for the file path Alberto!)

Working with m2v files extracted from m2t

Hey everyone. Here's a question...
First, the background: I'm working with LumiereHD and a JVC GY-100U HDV camera recording in 24p. In the past, I have captured the m2t files into Lumiere, extracted the m2v and aif files, then created mov files for import and editing into FinalCut. This works perfectly..
Now the other day, I accidentally imported the wrong set of files into Final Cut, those being the m2v files... what I found is that the m2v files will play in the viewer perfectly (and if the aif files of the same name are in the same folder will play with sync sound).
My question is, since final cut can PLAY the m2v files, is there a timeline codec I can use so that I can edit with these m2v files and save the step of transcoding them to mov files?
The problem here is that I'm working with ProHD 24p HDV files rather than the standard 30 frame HDV. I know Apple is supposed to be releasing support for 24p in it's next "technical update" but that news was released months ago and there still no sign of it on the horizon... (too bad you couldn't 'modify' one of the existing HDV templates to work in 24 frames).
There may not be a work around here, but I figured if anyone knew if it would work, someone here would.
Thanks!

Almost forgot to mention... I was looking to gain real-time benefit. I can drop the m2v files on the timeline and RENDER them, but that defeats the purpose of working with the native m2v files...

Error with missing files after force quit

I just spent hours building project management pages for work when the program would not respond I was forced to force quit. Then when I try to reopen I get an error and it tells me that all of the fonts and content is missing. When I click on each page it shows me images from templates that have gone away. Has anyone experienced anything like this?

If you have the 'keep' option enabled and let iTunes do the work - take a sound track album as an example - that has various artists and you didn't tell iTunes that the album was a compilation album - then iTunes will put all the tunes into into the iTunes Music folder as Artist>Album>Song - if you have the compilation option enabled for the tunes on that same album - iTunes will nest it as iTunes Music>Compilation>Album>Song. This helps reduce the clutter in the iTunes Music folder with a thousand artists and only one tune for that artist.
With the 'keep' option selected iTunes will move tunes automatically within the iTunes Music folder. Since iTunes moved the files it can keep track of the links.
To create a second library launch iTunes with the 'option' key down and follow the dialog box instructions. I have a 'Master iTunes Library' on my internal HD and several ext HD's with other libraries which I give unique names i.e.: Really Big Music. I give the library data base file its' own unique name so I don't accidentally erase the wrong file. I also keep all the files that you would normally see for an iTunes library on the ext HD (iTunes library. .xml, art work etc.,). If you are into lots of movies and TV Shows you could create a library on and ext HD with only video content and name it accordingly. You would keep all the files for that library including the library 'management' files on the ext HD in the same nesting as you would find on your internal HD.
This strategy works for me. I tried to manage the files by myself at one point and just had to many problems so I decided to not fight City Hall and go with the flow and it works for me.
MJ

Blinking folder with question mark after doing update

I just upgraded a Mac from Leopard to Snow Leopard. Next, I downloaded and installed the most recent Snow Leopard updates to bring it to 10.6.8
After installing the update there was a period of time where nothing was onscreen and than a blinking folder with a question mark appeared.
I cut the power and rebooted and it seems to be working ok.
1. Is there some damage done to the installation? Should I reformat and start over? I just do not want it to cause a problem later on when I start doing work on it.
Thanks.

There is no System Folder in OS X. Here's what I would recommend doing now. Make sure that the normal startup volume is selected in Sys Prefs>Startup Disk. If it wasn't selected, this may be why you saw the blinking folder/question mark.
Download the 10.6.8 Combo update, boot to Safe Boot by holding the shift key down at the startup chime. Give it much longer to boot than a regular startup. A Safe Boot will, effectively, check and repair the Disk, if it is found necessary to repair it. Then install the 10.6.8 Combo, which may fill in any missing or corrupted files. Installing from Safe Boot, where most third party programs are disabled, reduces the chance of any incompatibiites with the update.
You may want to have a look at my recommendations for updating.
https://discussions.apple.com/thread/3139323?tstart=0

Blinking Folder with Question Mark after replacing Hard Drive

I have a 2010 Macbook Pro. It recently stopped starting up. I took it to the Genius Bar and the guy working there told me I needed to replace the hard drive. I did that. Now when I start the computer up I get a blinking folder with a question mark on it.
I've tried holding Option to get to the Start Up Manager and I've tried holding Command+R to get to Recovery and both give me no results.
I cannot find my original Installation Disc.
Can anyone give me advice on what I should do next? Do I need to get another copy of the Install DVD to continue?

Install Snow Leopard from the original discs that came with the computer. You cannot use a retail Snow Leopard DVD with that model. Update to 10.6.8. You can then redownload Lion or Mountain Lion freely if you have purchased them already.
The first thing you must do is partition and format the drive before you can install OS X. To do that you will need an installer disc. You can purchase replacements from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
You cannot use Internet Recovery unless you had Lion or Mountain Lion already installed. In that case see:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Directory in home folder with 1367321 files?

Hi!
I have a random named (DZVhveYJ_Y) directory in my home folder (~) with 1.3 million files in it, also random named, all of them six characters. Directory size is only 480 MB. What can this directory be? Should I delete it?
Last edited by Bailando (2014-01-29 17:09:17)

jasonwryan wrote:What is in the files?
...and for your information, before you try to open them, you can find out what type they are by using the command "file <filename>". I hate it when I accidentally try to open a binary file in a text editor.

What do you do with source file after edit and export

Hi
i wounder what people do with the source file after edit, they are taking up a lot of space on my computer. I can hardly bring myself to delete them, but neither can i save them, beacuse of space on Hdd. have thought of, only export those clip you have used in your timeline, uncompressed?

Hi,
i wounder what people do with the source file after edit, they are taking up a lot of space on my computer. I can hardly bring myself to delete them, but neither can i save them, beacuse of space on Hdd.
If you don't need them at all, you can delete them. People usually store them in external drives if they need them.
have thought of, only export those clip you have used in your timeline, uncompressed?
Didn't really get this part. Do you mind explaining this?
Thanks,
Rameez

Uninstall folder with 192 files in them?

Can anyone tell me what the files are for in the Uninstall folder? The file path is: Library>Application Support>Adobe>Uninstall.
I have 192 files in there with all the extensions either .db or .js
I don't get it.....please enlighten.
Thanks

Those (tiny) files keep track of everything that has been installed and tell the Uninstaller what to remove.
If you delete them, the Uninstaller will be pretty much useless when you need it.
Wo Tai Lao Le
我太老了

MPEG folder with .m2v files after build required?

Similar Messages

Maybe you are looking for