Mpeg goes "black" on full screen

I have just bought quicktime pro to enable me to view in full screen mode. The videos play perfectly in small screen but when full screen is selected only a black screen is displayed even though the video seems to still be playing. Codecs seem to be ok according to gspot

The external camera is not HD just found that out

Similar Messages

DVD playback: screen goes black in full-screen mode

Hi. Having problems with DVD playback on 1 Ghz Powerbook G4 12 ". When trying to view in full-screen (or even sometimes in maximum) mode, screen simply goes black. Sound still works, but no visuals. As soon as I revert back to Normal size, visuals play fine.
Any ideas ? This is a problem which has developed rather than being with the machine since I bought it. Just for the record, I have 1.25 GB RAM installed and am running 10.4.5.

OK, if you see words, it's not your graphics card. Follow this knowledge base article. The BlackBerry desktop message suggests a corrupted device os. NOTE THIS WILL ERASR ALL DATA SI BACK UP AS POSSIBLE!
How to to recover a BlackBerry® smartphone after all other possible means of recovery have been exhausted.
Remove the battery from the BlackBerry smartphone.
Open a web browser and navigage to the following link.
Click Check for Updates.
Wait for the Device Connection dialog box to appear with no result for pin.
Connect the BlackBerry smartphone to the computer with the battery removed.
Press Ok when the PIN field is populated with the BlackBerry smartphones PIN number or PIN-Unknown is displayed.
Note: Some BlackBerry smartphones may be in a reset loop, which will cause the field to populate and depopulate. This is not an issue; pressing OK when the PIN field is populated will allow the process to move forward.
Select the appropriate version of BlackBerry Device Software and applications for the BlackBerry smartphone, click Next.
At the Review the following options before you begin dialog, insert the battery without unplugging the USB cable.
Press Install update.
1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

Goes black in full screen

There are a few issues I am running into on iMOVIE 11 running on lion. The first is that sometimes when editing the preview screen of the video will be stuck on a freeze frame image of a random clip and sort of ken burns it as if the video were a photo. Sometimes it just goes black. When I restart imovie i can get some editing doen then it goes back to the problem. The audio still plays. Also after about 5 minutes of playback in fullscreen mode -the screen will flash off and on and then just cut out, all the while still having some audio. The film I am using was captured by the camera on my computer from the import button in imovie and some from an external hd camera. When I try to export the video it gets to one minute left and then imovie quits unexpectedly or it says there is not enough memory in the heap zone.

The external camera is not HD just found that out

Photos on Facebook are all black, likewise full screen Youtube videos.

When I click on a Facebook photo, it quickly shows a full size blurry sketch, then turns all black. I can watch Youtube videos small, but when I make them full screen, they are all black.
Without first uninstalling Firefox, I downloaded Firefox and installed it again. It didn't improve the situation.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Re: Satellite Pro A200 - Screen goes black after BIOS screen

Hi,
I'm new to the forum and have quite a big problem. So any help is welcome and appreciated.
My Satellite Pro A200 goes black after the BIOS screen and a black screen with a blinking cursor. Also just before the screen goes black a bleep can be heard which shows windows is booting.
I can access the toshiba set-up screen but not the safety mode set-up.
Kind Regards

Hello
You wrote that you can access the BIOS but have you checked if the HDD is recognized properly? Maybe the computer cannot boot because HDD isnt recognized so you should check this.
If the HDD is recognized I would try a recovery installation from Toshiba recovery disk. It seems that Windows isnt able to start and if you reinstall the whole system it should help to get rid of this. Just go in boot menu and select CD/DVD drive as boot device.
Check this!!!

HT1430: ipad goes black after lock screen

When the ipad goes on the lock screen and i slide to unlock it, the whole screen goes black and will only display the time, battery and signal sign, i pressed the home button but it just gets rid ov the things that were being displayed the only way i can make this go away is if i lock my screen and sliding the unlock button again. Is there something wrong with my ipad or is it a programme ??

Try the following:
- A reset. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

My screen on my ipod touch 3rd gen goes to over full screen size. can anyone help me on how i adjust it back to regular size?

the screen display on my ipod touch 3rd gen goes over full screen size. can anyone help me as to how i get it back to the normal setting?

Check Zoom features here.
http://www.apple.com/ipodtouch/features/accessibility.html

DVI to VGA screen goes black

I have a G5 and wish to mirror a TV screen to the existing monitor. I have bought a DVI splitter to DVI and VGA. One screen goes black ( the Mac Screen ) as the Mac thinks there is only one monitor connected. How do i tell the Mac to have a mirror screen when in Display the options are hidden. Can you halp please

thanks for this. So I need to use the two monitor ports. The DVI adapter/ Splitter seems to convert to the VGA for the TV OK. Can I use a converterto use the ADC Port to DVI connection for the Mac Screen

Make firefox stop going into full screen

I upgraded to Firefox 10 on my macbook pro snow leopard and now the browser keeps going into full screen mode automatically. If I toggle it off, it just goes back to full screen in a few seconds.
I have re-sized the screen and it still does it.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Try to remove the Firefox plist file (org.mozilla.firefox.plist).
* http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

Going full screen on you tube

i have an a305-s6905 and while on you tube or any of those other sites when i switch to full screen its just black. any ideas?
Solved!
Go to Solution.

Satellite A305-S6905
There is a known bug in Flash Player, which will cause a YouTube display to turn black when full screen. Adjusting the following Flash Player setting should fix it.
While the video is playing, right-click on it and click Settings. Uncheck the box for Enable hardware acceleration.
-Jerry

Why does my iMac screen keep switching off / going black?

After about one half hour of use my new iMac screen switches off / goes black.
The screen can be switched on by pressing the power button on the back on the machine a few times. It remains lit for about 20 seconds. This can comntinue for about half an hour when it stops switching off or when I give up.
I have conrtacted Apple but they have been unable to solve the problem.
The machine is just not fit for purpose as I cannot use it for work.
It appears from the internet that this is a recurring imac problem.
Please, what am I to do?

Call AppleCare (number is in the manual) and then request to speak to Customer Service. Be patient, organized and articulate and they will transfer you. When you get to speakt to someone then explain your problem and ask for their help. You should have all your receipts, invoices, trouble ticket numbers etc available for reference.
You can also take to an Apple Store in Spain, while this may not be convenient at least then an Apple person can see the machine and work on it.

Full screen with swapping swf file

I am creating a projector presentation in which a swf file is
being loaded (loadmovie) and replacing the currently running one.
And I have the movie set to be full screen mode (both movies are
set to that using the fscommand). The problem I'm having is that
once the new movie is loaded, it goes from being full screen (movie
is not being scaled, so there's black behind it) to jumping into
the left hand corner of the monitor at the movie's size. It still
kinda acts like it's full-screen, there's no menu items and no
window frame.
Any idea what's going on here, and better yet, how I can fix
it?
thanks for your help.

Don't load external files into _level0 or _root.
Replacing the main swf with another is not a good practice.
There are a few other examples of problems caused by this.
AFAIK this only happens on the Mac platform. Is that what you
are using? Also I don't think there is any other solution. If
anybody knows anythings else, please let us know.

Aperture 3.5 Full Screen mode really buggy

Let's try this again....
I'm looking for anyone else having this problems to see if they have found a work around.
I have been having several intermittent problems with Aperture 3.5 in full screen mode with Mavericks. Most of the time, it's ok. But now and then, it seems to get stuck on something. When I swipe to go back to another application, it goes to my widget's panel, not the desktop. Swiping up to get mission control, I see the desktop and go to it. That really messes aperture up. You go back into it and its a black screen. I try to get out by pressing F and sometimes it works, sometimes not. When it DOES work, I will select an image in the browsers and strangely enough, the screen goes black and it goes back into full screen mode. Kind of a mess.
Additionally, the entire app seems to drag. Selecting an image make take 3-5 seconds for it to switch from the one it is on to the one I selected. And I'm using a fully loaded top processor speed/max memory 27" iMac from last year.
Has anyone else experienced this and found a work around?

Thanks, both.
I did try it and it somewhat changes the problem, but it is still there. The full screen system seems to get messed up and when it does, it can't seem to get out of it totally. When it starts singing daisy in full screen mode and you get it to exit full screen mode, the top menu disappears and selecting anything (even empty gray space) within the app sends it back into full screen mode, but once here, nothing responds to user action (can't select images from the browser, the HUD is unresponsive, etc). A few other quirks I can't nail down with any consistency.
The only way I have found to avoid it is to completely exit the application, reboot, restart it and never go into full screen mode. It's still a little more sluggish that it should be, but at least I can do my work and get things to clients. Entering full screen mode just seems to be too buggy for practical purposes so far.

8.1 full screen problems landscape

Since updating to 8.1 Tapping to view videos in full screen goes to portrait full screen instead of landscape full screen while in landscape position. There are also problems trying to full screen in portrait position.
i pad mini retna 16 gig
Geeno12

Your statement is a bit vague as to where you see this behavior.... In the Videos App, Safari, YouTube? Every video In every app? WIthout more details, try the basic troubleshooting steps. Clear Safari, close all apps, reset your iPad. If that doesn't help, reset all settings.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Mpeg goes "black" on full screen

Similar Messages

Maybe you are looking for