Mpeg still isntead of video in track

Hello -
I have a few hours of audio content we want to include alongside some DVD Video and a couple gigs of ROM content on a DVD5
Is there a way to get DVD studio to use an mpeg still, rather than motion video, in the VOB resulting from a track, or does a track necessarily have to create a video stream for the entire length of the audio. As an alternative, can I make a still menu that iis over an hour in length?
I'm in the process of looking up the max. menu duration, but haven't found the page in the manual yet...

The menu is based on size and not running time - 1 Gig and you can also move to different VTS (Pg 44, 566 PDF)
You can copy and paste stills into a track, just a tiff or pict if you want, comes in at a set length then you can duplicate it out if that helps

Similar Messages

Exporting FCP to MPEG 2 with video & audio tracks COMBINED?

I want to post a film on Google Video. I'm told they like MPEG2 files, but with the audio and video combined.
How can I create an MPEG2 with the video and audio combined?
I've also been told I can change the .m2v extension to .mpg after I've encoded, without causing problems. Their 'uploader application' doesn't like the .m2v extension.
Thanks,

Are you uploading a video to http://video.google.com/ ? You do NOT need MPEG-2 to upload videos there. Have a look at Uploading Videos at the Google Video Support page.
Compressor can only make MPEG-2 Transport Streams, not Program Streams. With a little help of a great application called MPEG Streamclip , you can easily make MPEG-2 Program Streams.
Encode your video and audio using Compressor. For audio, choose AIFF, and make sure it gets the same name as the .m2v, but of course with the right .aif suffix.
Open the .m2v file in MPEG Streamclip (the audio should automaticly load with the video file if they have the same file name). Choose the file menu and choose Covnvert To MPEG Using MP2 Audio.
Good luck!

How to save a still image from video without Photoshop

So- I need to save a still from some video but I do not have Photoshop. How can
I do it. Is it possible in FCP? Any other ideas?

In your timeline, park the playhead on the frame you want to make the still from; now double click anywhere in that video clip, and it will appear in the viewer. Then Shift/N will make the still frame for you. Now go to the file menu and choose Export/QuickTime conversion, choose Still Image, and under options, set the image type.
I've also discovered recently that MPEG streamclip can produce very good still frames; if you have a QuickTime movie you've already made from an FCP sequence, you can very quickly drag it to an MPEG Streamclip window, move the playhead to the frame you want, and choose Export Frame from the File menu. You can then choose an image type, and a location for the image file.
Useful if you don't have FCS open at the time.

I was told that my new imac with Lion could burn dvds..so I bought it..now have finished editing a wedding in iMovie full of HD stills mixed with video from a non HD SonyDCR-SX63.. just saw the scary question.. "Where is your iDVD? How do I make a DVD?

How to I burn to a DVD my project edited on mynew imac with Lion in imovie? I used some HD stills and some video from a non HD sony DCR-SX63..was ready to burn a DVD then saw the haunting question "Where is iDVD?" Please help..this wedding edit is long ovedue.

How to I burn to a DVD my project edited on my new imac
If you are still within your 15 day return period. Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes.)
Nicely explain that you may return the computer without iDVD. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

I saw that the APPLE TV product can be used with VIMEO videos. can i still access VIMEO videos to my TV with a reg PC or do i have to have an APPLE?

i saw that the APPLE TV product can be used with VIMEO videos. can i still access VIMEO videos to my TV with a reg PC or do i have to have an APPLE?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

I have installed an updated version of flash player on my mac but I still cannot view videos on line

I have installed an updated version of flash player on my mac but I still cannot view videos on line.
I am running mac os x 10.6.8 i have an inte processor.
What do I need to do?

How to perform a "clean install" of Flash Player in Mac OS X

How do I take still Photos from Videos on iphoto11

How do I take still Photos from Videos on iphoto 11

You do not - use iMovie or an external editor that has this capability - I believe QuickTime Pro does
LN

Help how do you save a still frame of video as a photo?

Help how do you save a still frame of video as a photo? Thanks

A still frame from an Event:
Put cursor at the frame you want, then right click (or command click) and select "Add Still Frame to Project".
The still frame will be added at the end of the Project.
A still frame from a Project:
Put cursor at the frame you want then right-click (or control-click) and select "Add Freeze Frame". The Freeze frame will be added after the clip.
In both cases:
Select the still frame (so the yellow band is around it).
Right-click (or control-click) and select "Reveal in Finder".
You will see a JPG file highlighted in the finder.
Drag this file and drop it on your iPhoto icon in the Dock.

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Inserting Stills Into a Video Timeline Quality Issues

Is there a best option of extension or description of stills to use when adding pictures to the timeline?
I am trying to add a jpg file just as a still in the video and it loses a lot of quality when I drop it in. It is fine in the viewer. What am I doing wrong?

Hey V
The source is less than 1/3 the resolution of the eventual target resolution (1920x1080) so you must be doing a more than 300% blowup of that image in order to fit your target. That will account for some of the loss of quality you are seeing. Additionally, as Tom has alluded, the Canvas window in FCP is just a low res proxy view of your edit ... you need to see the rendered footage on a proper video monitor before you can be certain of the final quality.
As for the dropped frames, FCP is trying to convert this low res PDF file into an HD video format in real time ... which is proving too much for your system. You'll need to render that section first for realtime playback.
Hope that helps explain whats going on and why.
Best
Andy

Using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects - 6/23/14

Very disappointed with this choice. I will definitely be seeking to uninstall this version and go back a version or two. Two many extra steps to export an mp4 now. And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware? You guys fighting mp4 as a standard, forcing us to an additional product, or what? I'll be sharing my extreme disappoint with this 'upgrade' with the rest of the developers at work and who just had it installed. I'm not seeing this being too popular opn social media either. Seems like you only did what was best for you.Thanks for showing us who's boss.

Frank VA wrote:
And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware?
Not necessarily. You can render an intermediate codec with AE's render queue (thus using all of AE's power to render) and then drop that file into the Adobe Media Encoder.
This was the workflow I've always used - even when AE could encode with MP4. Why? Well, because AE sucked at MP4 encoding. You couldn't even do multipass endoding with it!
This is a useful workflow in a few ways:
1. You have an archive-quality file to come back to in the future.
2. You can use AE's full power to render.
3. You can use AME's superior encoding capabilities.
4. You can tweak your compression settings and try various encoding parameters to improve the quality while decreasing the bitrate of your product WITHOUT having to re-render the AE comp every time you try since you're working off of the intermediate file. I mean, imagine a comp with several 3d layers, depth of field, shadows from multiple lights, and 250,000 particles from Particular. What if you made an MP4 and then the client needed a smaller file size or the MP4 you made was too heavily compressed and you needed higher quality? I don't know about you, but I'd much rather only render that 18-hour monster once.
This workflow actually saves time for many people.
And, in any workflow, this produces a better product.
Again, this is what I did even when AE could encode MP4's.
Frank VA wrote:
You guys fighting mp4 as a standard, forcing us to an additional product, or what?
They aren't fighting MP4 as a standard, in fact, when Adobe folks pop in here and answer questions, that's often their recommendation for delivery codec.
Frank VA wrote:
Seems like you only did what was best for you. Thanks for showing us who's boss.
Listen, I understand your frustration. Knocking out a quick compressed file from AE for client review is handy.
However, maintaining the h.264 encoding in AE took up development time. There are only so many person-hours per week for the (relatively tiny) AE team to spend on building each version of AE.
I never liked AE's h.264 encoding - AME has always done a superior job. Since we have AME to do our encoding, I would rather the AE team focus their effort on improving AE as a compositing and motion graphics tool rather than as an encoding tool.
Again, I get the frustration. I can see where it feels like they are doing what's good for them and not us, but I think, in the long run, this way is better for us. Right now, the majority of the AE team is working on making AE faster to work with and faster to render. The sooner we get a relatively bug-free version of that, the better! (Especially for folks on Mac OSX Yosemite who can't RAM preview smoothly in any version of AE).
And at least the After Effects team has been very transparent about things - for example, this blog post talks about their reasoning: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects

How do I save a still image from video in imovie '11?

How do I save a still image from video in imovie '11?

See this User Tip by AppleMan1958 -
https://discussions.apple.com/docs/DOC-3231
John

Aspect ratio for stills in a video - Pre 11

My camcorder is set to 16:9 aspect ratio. Pre11 seems to know that and automatically uses that format. My still camera is usually set to 4:3. I frequently add some stills to my videos at the end - add some music and use cross dissolve transitions. Those pictures keep their 4:3 aspect ratio (which I personally like for most stills).
I am new to Pan & Zoom. I notice that when using Pan & zoom the keyframes are 16:9 ratio. This sometime requires too much cropping (especially if the still was a close-up). Is there a way to make PRE11 use 4:3 ratio for stills using pan & zoom?

Select your still on your timeline, then click the Adjust button to open the Adjustments panel. Open the Motion properties, then click the Show Keyframe Controls button (the stop watch) in the upper right corner of the panel.
I show you step by step how to keyframe motion path pan & zooms in my books, if you're interested.
http://Muvipix.com/pe11.php
And, if you just want to learn the basics of the program, I've got a free 8 part Basic Training tutorial series for Premiere Elements 11.
http://forums.adobe.com/thread/537685?tstart=0

Mpeg still isntead of video in track

Similar Messages

Maybe you are looking for