Mpeg Streamclip error msg. 'movie's too long'

I am trying to convert an mp4 from Vimeo, to a Quicktime file. When i put it into streamclip, and try to export only 3 min. of the 20 min. movie, I get an error msg. stating that the movie is 'too long'... It's only 20 min., and only need 3 min., so, am not sure why am getting that msg. I also tried opening up the file, and exporting to quicktime mov., and only exports the audio, but no video... An

I did open in the mp4 in Streamclip, selected in/out points, totalling 3 min..., treid to export to quicktime, and then got the error msg. saying the movie was 'too long'...
When I tried exporting from quicktime, to 'moive to quicktime movie', that's what only exports audio, and not video...
I've never seen this before, I always use mpeg streamclip, to export an mp4 to quicktime...thanks for your help...

Similar Messages

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

Solved printer installation problem – "error-user-request-value-too-long"

A discussion in July 2006 left the problem of printer installation unsolved. My contacts with Apple Support have also led to frustration for everyone.
Whenever I have tried to install any printer I end up with the error message:
"error-user-request-value-too-long".
Luckily I discovered the shareware program "Printer set up repair" on Versiontracker. It worked wonders in 5 minutes. Now everything is fully functioning. It also provides an extremely useful log-file telling you which (often hidden) files that are missing or damaged.
Address: www.fixamacsoftware.com/software
Phew!

Well, I tried all of that and I'm still getting the error message. I've also repaired disk permissions and run Disk Warrior. When I repaired disk permissions, many HP printer items showed up in the list.

I am getting an error Bad Request Request too long HTTP Error 400. The size of the request headers is too long.

When I sign into Methodintegration.com my data base I can get in ok. When I sign out I get the following error: I am getting an error Bad Request Request too long HTTP Error 400. The size of the request headers is too long. If I close Fire Fox and go back in it will work one time and then I get the same error message.

That is usually a problem with corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

ORA-06502: PL/SQL: numeric or value error: raw variable length too long

Hi All,
Oracle 9.2.0.1.0 and Oracle 10g.
I the following procedure:
CREATE OR REPLACE TYPE Resource_TT AS TABLE OF RAW(16)
CREATE OR REPLACE PROCEDURE GET_ROLEMAPPING_Temp
RoleIds IN NVARCHAR2 DEFAULT NULL ,
Application IN NVARCHAR2 DEFAULT NULL ,
MappingExixts OUT NVARCHAR2
AS
     v_Application NVARCHAR2(150) := Application;
     resource_list CONSTANT Resource_TT := Resource_TT(RoleIds);
     v_temp NUMBER(1, 0) := 0;
BEGIN
     SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT SecurityGroupId
FROM SKESGResourceMapping
WHERE APPLICATION = v_Application
AND RoleId IN
                                                  select column_value
                                                  from table(resource_list)
EXCEPTION
WHEN NO_DATA_FOUND THEN
MappingExixts := 'NO';
END;
IF v_temp = 1 THEN
MappingExixts := 'YES';
     END IF;
END;
while calling the procedure from sql*plus, the calling block is :
variable MappingExixts nvarchar2(100);
execute Get_RoleMapping_Temp('2f90e7969e0a9045aeb5b5ed7b3da9d6,363aef470e10094281e5040627e3b6f8', 'repo1', :MappingExixts);
print MappingExixts;
It is throwing an error saying:
ORA-06502: PL/SQL: numeric or value error: raw variable length too long
ORA-06512: at "ORACLE1.GET_ROLEMAPPING_TEMP", line 8
Thanks for your valuable time and suggestions

Hi Binoy,
Thanks for your quick response, I increased its size to 200, but I am getting the following error
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at "ORACLE1.GET_ROLEMAPPING_TEMP", line 8

Compile error "input line is too long" when using useLegacyAOT

I'm using FlashBuilder 4.7 and the release of AIR 4 on Windows 7 to package for iOS...As soon as I include 3 or more ANEs I can no longer compile to iOS (and also use the new "useLegacyAOT no" command). When I try I get an error "The input line is too long. Compilation failed while executing : compile-abc"
I found a couple other similar issues. One post suggested instead of pointing to individual ANEs (in Package Contents) to point to a folder instead--but this doesn't fix the
Another post for a slightly different problem said it was fixed in the release of AIR 4.
Any ideas? I wonder if I move my AIR SDK to a simple path (like "c:\air\adt.jar" instead of "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\adt.jar") if it'd help.
Thanks in advance!

Awesome! I got used to the new useLegacyAOT thing very fast. In the meantime, I have to decide whether to remove all my ANEs and test or sit through an interminable build sequence.
What's the current plan for a new release? Is there any way I could get a beta copy just to use during development?
Thanks!

Can't export because movie is too long (9:42 minutes).

Hello, I have a series of 12 hour long MP4s. I wanted to merge them all into one movie that I could store under one album cover on my iPad. I figured I would use iMovie so I put them all in one project. Then tried to export. After three or so hours of "preparing the project" an error popped up saying that the file is too long. I have over 600GB of free space on my harddrive so it isn't that.
What should I do without shortening the video?
Thanks!

Are you using version 8 or version 9? It's hard to tell because you reference both.
In version 9, if you go to the Share tab and select the Computer option, you'll be taken to a screen with seven output options.
Audio wil be listed as your last option. (You do have to click on the Audio listing to select it.) and MP3s are certainly among the options listed on the Preset menu.
If you can't see it, you need to scroll down or resize your panels -- or your computer monitor may not be large enough. But it's there.

TS3772 I made a 3 minute movie with my iphone 4s. when I attempt to share it by message or email, a message says the movie is too long and that I must make clips. Is there any way to get around this and send the whole video? I think everything is in the c

I made a 3-minute movie with my iphone 4S. When I attempt to share it via email or message I get a message that says it is too long, that I should try to make a clip. Of course I had rather send the whole thing. What are the possibilities? I think my music and likely my videos and pictures are in the cloud.

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

How do I split a project in IMovie into two projects? When I try to burn a DVD RDL in IDVD, it tells me the movie is too long.

I am running IMovie 8.0.6. (OS X Mavericks 10.9.5) How do I split a project into two projects? When I share it in Media Browser to IDVD, and try to burn a DVD- RDL, it keeps telling me the project is too long. Do I split it in IDVD and how do I do that?

AppleMan Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents" but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb. Any further step-by-step instructions would be appreciated as I am obviously doing something wrong. Babowa It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

Mpeg streamclip avi to mov conversion settings for Final Cut Pro

Some help please.
I have just started to attempt to edit some avi files on the latest FCP, and for one reason or another, I'm having trouble converting the AVI files to MOV files in Streamlip, I have tried quite a few variations, but with very little joy. When i try to import a recently created MOV file into my FCP project, it either has no audio or both video and audio need rendering once placed on the timeline.
When I try to play the created MOV on QuickTime, again, there is no sound.
I was just wondering if someone would be kind enough to tell me the exact Streamclip AVI -> MOV settings they have used to combat this problem, or simply just tell me where I'm going wrong.
Hugely appreciated.

Hi again,
I have spent the last few hours trying all different types of variations of conversion, but with no lukc.
Thanks for the tutorial link, but the problem isn't that I don't understand how to use Streamclip. i just don't know which video and audio settings to use to create a .MOV file that will provide me with audio. This seems to be my major problem so far. Audio isn't even present when I view the .MOV clip in quicktime.
I have tried DV - PAL, H.264, Apple Motion Jpeg A, Apple DVCPRO - PAL etc etc, none with any success. It may be the way I'm trying to compress the audio, but I'm pretty sure that I've now tried everything!
I simply need to know a good conversion and compression setting that will at the very least allow me to play the video with audio in QT. once I have that, I don't mind rendering the audio in FCP as it takes no time at all to do.
Cheers!

Repair Permissions Error (Close to Runs too long, No Progress Bar)

I have gotten this Repair Permissions error at least 10 times:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
One Internal Hard Drive, Erase, Install from scratch using Retail 10.5 DVD.
Quad 266.
It is similar to Repair Permissions takes forever with no progress bar, I get the Barber Pole for about 10 minutes and then it finishes with the above error. It seems like it is hanging trying to deal with the problem file and can't repair it.

I ran REPAIR PERMISSIONS again after installing Acrobat updaters.
At first I quit because it appeared to be hung.
I re ran it and came back later to this:
Repairing permissions for “105_HD”
Stopped by user
Permissions repair complete
Repairing permissions for “105_HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete

My QuickTime Movies take too long to download

I need some assistance with QuickTime movies that I have uploaded to my website.
I upload several movies and then click on them from my web page, but they don't stream, they take up to 4 or 5 minutes to download before playing. Is there a way to have them stream as soon as possible without the complete downloading process?
Thanks,
Craig

No. This has happened in more than one place, with seemingly perfect internet connections. It appears to be some sort of overload or file corruption at Apple's end. For instance, right now I'm trying to download the movie Elysium for more than 3 days. It takes little more than 15 minutes to download half of the 3.9Gb, but then a problem occurs and it starts again. It this was simply an internet connection issue, it would probably continue from the point where it stopped, wouldn't it? Another possibility would be a problem with my iPad, but I find quite unlikely, because I can download purchased (not rented) movies and tv series normally. My problem is very specific: rented movies.

Some home movies buffer too long

I just created 2 movies in 720p and added to iTunes library. One plays fine, but the other starts, but waits forever at teh initial scene. It shows the first image, but freezes with the waiting symbol while it appears to be buffering (Blue thermbar slowly extends in silver).
I had this issue with 1080 movies, but realized it's probably converting to 720 before it can start play.
But why would it do this when the movie is already in 720 ?
I created the movies from 1080 source footage with iMovie '11. First movie was created with the Export command and the second one with the Share to iTunes command. Both appear to create the exact same output - .MOV file with H.264/AAC video/audio encoding, 10K bitstream, and 1280x720 resolution.

The videos with the problem are generally the much larger ones - about 30 minutes in length. I realized later there is a Streaming Fast-start setting in Quicktime Conversion export, but no such setting for any other export method.

I bought a movie not too long ago and its not downloading. what should I do?

So I tried renting a movie.."Alice In Wonderland" the old one the 1951 one..and it just won't download and last time I called iTunes they say just wait a few days and then once you have plugged it into iTunes it will download..and it hasn't..please help.

Open itunes on your computer, click Store>Check for Available Downloads

Mpeg Streamclip error msg. 'movie's too long'

Similar Messages

Maybe you are looking for