MPEG Streamclip not working on Mac Os X - downloading videos and converting for FCP X

Hello,
I had used MPEG Streamclip (square 5) before but its not loading the url and not finding the files... any ideas? I need to download short free archive clips for this project. I would appreciate your help and suggestions. _M in Sydney

a friend tested the program on their computer and it worked but they were running the new snow leopard operating system, this is the hardware overview
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f0
Sudden Motion Sensor:
State: Enabled
as far as i can tell there isn't any corruption - can i test for that?
should i try to un-install the entire suite or just photoshop??

Similar Messages

Mpeg Streamclip Not Working

Hi:
I'm trying to import some footage off a DVD, but Mpeg Streamclip 1.9.2 isn't working on my MBPro, running 10.5.5 with Quicktime 7.5.5. I tried it on my G4 TiBook with 10.2.8, no problem. Any suggestions? TIA!

Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Mpeg Streamclip not working on Mavericks

Hi All.
I have been using MPEG Streamclip for over a year successfully to clip video files into smaller clips ready for Final Cut Pro X. Recently this has not been working. My computer spec is;
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.9.2 (13C64)
I have deleted and reinstalled the softwarw and I keep ending up with the dreaded spinning beachball. All I can do is force quit and try to start again. Any help will be appreciated.
Thank you.

That would be an issue probably best taken up with Square 5:
http://www.squared5.com/svideo/contact.html
Others have reported problems with Mavericks and Stefano hasn't issued an update for StreamClip in a year and a half, the last version being a beta for compatibility with Mountain Lion, so he may have abandoned development and may not respond.
Regards.

AVI to Apple TV Conversion (mpeg Streamclip not working for me)

Hi all,
I have .avi video I'd like to watch on Apple TV. I tried using MPEG Streamclip as I read about on the forum, but when I convert the file on the default settings all I get is audio; the picture is blank.
Any thoughts?

I should add that I don't see any video when I import it to Streamclip, just the dice logo.
Wierd! In that case, it sounds like the problem may be MPEG Streamclip and its access of the QT components. Which version do you have installed? Do QT components comply with MPEG Streamclip recommendations? Is Perian installed and if so did you get rid of any potential component conflicts as recommended on its site?

Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

My own built fullscreen mode flv player is not working in Mac OS

I built a flv player, it is just a normal video player with a
fullscreen mode.
The video player is work fine in Window IE, FF, and Safari.
But not not working in Mac OS X, leopard & tiger &
May I know what might cause this problem?
I m usng action script 3, flash cs3 & all my browsers
already upgrade to latest version of Flash Player.
Help!!!

I am running Mac OS X 10.10.1 Yosemite and iPhoto Version 9.6 (910.29). Automatic updates in the Mac App Store is turned on for my iMac and it shows no updates available. I was told directly by Apple Support on the date that I wrote this article (Nov 8, 2014) that there were no Canon drivers and photo transfer software that worked with Yosemite. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution. At that time I was running Mac OS X 10.10 (because the 10.10.1 update was not yet available) and the most up-to-date version of iPhoto for Mac OS X 10.10 that was available at that time, at least per the Mac App Store. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution.
With the Mac OS X 10.10.1 update if the camera is in PTP communications mode the thumbnails now appear in the Import screen in iPhoto almost immediately. If the camera is returned to Normal communications mode; however, it takes forever for the thumbnails to appear. I have been waiting 10 minutes and iPhoto has generated only 14 thumbnails. So it appears that there is still something not working properly between the original Canon EOS Digital Rebel and Mac OS X Yosemite 10.10.1 when the communications mode on the camera is set to Normal.

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Hello, i'm using Iphone 5, with ios 7 . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac. What can i do ?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

In context not working with Mac Safari 6.04

Hi there just noticed
in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?

Hi Vicki,
I would suggest submitting a support case on this for further investigation.
Unfortunately I'm on a PC machine so I cannot confirm on my end. Please reach out to direct support ASAP if the issue is still existing.
- http://helpx.adobe.com/contact.html
Kind regards,
-Sidney

Tata Photon max on Huawei EC 315 is not working on Mac OS X 10.10

Hi All!
I have bought a Tata Photon max WiFi (Huawei EC 315) dongle, which is not working on Mac OS X 10.10.
Does anybody know what is the problem?
Do I need a different dialer?
Do I need a new driver for the Huawei dongle?
I didn't find satisfying solutions on Tata or Huawei homepage!
Who can help me to get this run?
I would be happy to get any feedback on my questions.
Thanks in advance for your comments.
MacMoe

Hello, please check this step by step video tutorial youtube to solved problems huawei modems on mac os x 10.10 Yosemite....Works perfectly!!! :-)
https://www.youtube.com/watch?v=jBM8qoV9VkM

Adobe Air not work on Mac OS X Yosemite

Related issues:
Adobe Air not working on Mac since OS X Yosemite upgrade
Adobe Air isn't working with Mac OS X Yosemite?
Bug report: Bug#3847656 - Adobe Air not work on Mac OS X Yosemite
When I try to install any AIR application on OS X Yosemite (updated last week) I have got error ""Adobe AIR Application Installer" is damaged and can't be opened.".
Uninstall and re-install AIR runtime didn't solve this issue. It works fine with Mac OS X Yosemite beta.

It works fine with latest Adobe AIR Runtime (this week update).

Repaint() method is not working in MAC IE

Hi All
why repaint method is not working in MAC IE ? What i am doing is in one class which is inheriting Canvas class getting the keybord input then adding it to main applet.
Please help me i am trying it for whole week and i couldn't find any solution. I didn't put my code but if anyone is willing to help me i can post it.
Thanks in advancs
Shan

Hi
Thanks for your reply. Actually i wrote simple applets and those are working well.
So i did debug the code and i found that when i am running the following code in Apple MAC IE, nothing is happening in handleEvent method. Especially it is not going into the if statement (if (evt.id==401)). here i am checking for KEY_PRESS. I also tried with keyDown method but same problem in MAC IE.
I am pasting the code that is giving me problem.
import java.awt.*;
import java.applet.*;
public class testApplet extends Applet
public void init()
setLayout(new BorderLayout());
editableArea = new EditableArea();
editableArea.setBackground(Color.yellow);
add("Center", editableArea);
EditableArea editableArea;
import java.awt.*;
public class EditableArea extends Canvas
String s = "";
public boolean handleEvent(Event evt)
if (evt.id==401)
if(evt.key >= 32 && evt.key <= 255)
char c = (char)evt.key;
s = s + c;
repaint();
return super.handleEvent(evt);
public void paint( Graphics g )
g.setColor(Color.blue);
g.drawString( s,5,15);
--------------------------------------------------------------------

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

MPEG Streamclip not working on Mac Os X - downloading videos and converting for FCP X

Similar Messages

Maybe you are looking for