MPEG Streamclip problem

I use mpeg streamclip but when i try to convert avi to mp4 or whatever itunes is capable of having and it takes all this time to convert or watever and then when i finaly get it on itunes i replay the movie and it is black with no audio.
p.s. The movie plays fine before i try to convert it and i have tried several and no progress.
Pleeeez help me!

There could be several reasons for this.
You could be using the wrong settings.
The file could be corrupt (regardless of whether it plays OK or not)
Mpegstreamclip may not have the codecs at hand to decode the AVI.
AVI is a container not a compression type, it can contain any number of different video and audio compression types which may or may not be supported by mpegstreamclip. The problem primarily is that AVI is so old and outdated it should have been put out of its misery years ago. Indeed even M$ abandoned AVI over 10 years ago. In some cases AVI can contain compression types that can no longer be converted, although these are rare.
Use Quicktime to open the AVI files, use the quicktime inspector to see what compression is used and let us know.

Similar Messages

Urgent!! Problems muxing .m2v files and audio!! MPEG Streamclip/Compressor

Hello!
I am under an urgent deadline to upload a short 6 min documentary clip for a client to review for screening this week. The footage was shot in 1080/60i HDV.
Usually, I find the best quality and fastest way to do this is to export directly from my FCP sequence using the '150 min Best Quality' DVD settings in compressor to get an .m2v video file and .ac3 audio file. Then I open the .m2v files in MPEG Streamclip which links it with my .ac3 file, then do 'Export MPEG with MP-2 audio". This gives me a single, muxed file that I can then upload to YouTube or Vimeo.
However, with this project, when I open up my .m2v file in MPEG Streamclip, it's recognizing the .ac3 file and I can see the info for it in the MPEG Streamclip window, but when I play the file in MPEG Streamclip or mux it, I don't hear any audio. Furthermore, after about 5 seconds into the clip, the playhead will continue moving, but the video will freeze, then maybe pick up again later. The .m2v video will play back smoothly in VLC player or Quicktime player, but not in MPEG Streamclip.
I've tried exporting different little sections of the timeline to see if maybe I had some corrupted footage or whatnot. I even exported a small clip from an older HDV project to test. But no matter where I export from, I am running into the same problem. I can bring the .m2v file and .ac3 file into DVD Studio Pro and burn a DVD with no problem, but I can't mux them. If I build the DVD file in DVD SP and try to open the .VOB file with MPEG Streamclip, I get the same problem. I even tried using a different software to mux (ffmpegX) but to no avail. When I try with ffmpegX, it either tells me I'm dropping frames, or if it works and it muxes it, when I open the MPEG file, it'll stutter at about 5 seconds in as well and I can't hear any audio, even though there is supposed to be audio in the muxed file.
I think I might have updated my Quicktime a few days ago with the system update, and maybe updated a few other things, so I don't know if this has any bearing on the problems I'm running into. But I was able just a few days ago to export HDV 1080/60i using this workflow without any problems.
I realize I have other export options, but this always seems to me to be the best quality and fastest way of doing it vs. encoding an H.264 which, on my machine is RIDICULOUSLY slow...I need to be uploading multiple versions of the cut to the client, and really need help! Thanks so much in advance!
J

what you want is an m2v program file. Export a reference copy from FCP (uncheck Make Movie Self Contained") That's very fast. Bring it into Compressor. In the settings panel find the MPEG-2 settings folder. Select Program Stream. Adjust to your liking and run. The audio and video will already be "muxed" when it's done and using compressor 3 you can set it to upload to YouTube, Mobile or similar sites.

Problem with MPEG Streamclip in Leopard

Hello:
I have used MPEG streamclip on my older Macs and it works great. I just bought a new Macbook, downloaded the MPEG2 playback component and cannot edit mpeg files. I can open videos but cannot save the edits to any format. I get an error message stating that the movie file cannot be made. Does anyone have any suggestions?
Thank you.

Having just migrated to Apple Mac from a PC I have tried generating a video using iDVD. The files I am trying to use are MPEG1, but they are not recognised as video files. I tried converting them, using Quick Time pro, into other formats such as .mov or .MPEG4 but they only covert the video without the sound track. I have also tried "saving" the MPEG1 files into Quick Time movies, but when you look at the file info it has an extension of .mov but the format is still MPEG1 Muxed. Is there a solution to this?
Using a PC I used Nero to produce videos on DVD using MPEG1 files without any problems!!

Problem with reading mp4 files with QT 7.4.1 or mpeg Streamclip

Hi,
I used to convert some .flv files into .mp4 files with iSquint and then into .dv files with mpeg Streamclip in order to re-work and compile these files on a DVD using iMovie and iDVD.
However I cannot do it anymore since I upgraded to QT 7.4.1. iSquint uses the mpeg-4 video codec to convert the file. Therefore I cannot open them with QT 7.4.1 anymore and I cannot convert them into .dv files with mpeg Streamclip anymore since Streamclip is uses a QT plug-in.
I have tried to solve the problem using Perian but this plug-in does not work with my version of Mac (Panther 10.3.9). I also tried to downgrade to an older QT using Pacifist but it nearly crashed my whole computer (fortunately I could fix that by reinstalling QT 7.4.1).
Has someone a solution to my problem?
Thank you in advance.
Steve

Not all the following will apply to Panther (10.3.x) so look carefully on the sites mentioned for the correct versions:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
If you get problems with viewing video on a website try moving this file to your Desktop:
Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
and then restarting Safari. If all now works, you can trash that file.
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Getting Around MPEG Streamclip "No Audio" Problem

(Long post; apologies in advance.)
I needed to get around the MPEG Streamclip "no audio" problem that other people here have had. I just found a workaround that more-or-less works for my specific situation ... and it's free to boot.
Since other people are having this problem, I thought I'd let you know what happened to me, so you can decide if this is something you want to try. If you do, I suggest posting replies here so we all can learn (if that's okay with the board moderators here).
QTAmateur for MacOS X is available at http://www.mikeash.com/software/qtamateur/ . The developer has a somewhat full explanation of what it does at the site, so I won't repeat it here (and I don't get anything for talking about it here; I just want to share the good news).
Right now I'm field recording with a Flip Mino camera (non-HD), which saves video/audio to an AVI file (3ivx MPEG-4, 640x480) at 30 fps, with 44.1 kHz audio (Microsoft ADPCM). Funny thing is the files from my Flip actually imported into FCE without any conversion, but I had to render everything. And the video looked like crap. Hated the rendering and the look, so I searched for other solutions.
After paying for a couple of things that didn't work (lessons learned there), I finally found MPEG Streamclip. Since I'm using Snow Leopard, I sunk the additional $20 into the dang MPEG-2 playback component after my initial export try didn't produce any audio. After the component install, I still didn't have audio. Grrrrr.
So I Googled a bunch of keywords, and I somehow stumbled across this QTA package. Snow Leopard users should note a minor drawback here: QTA needs QuickTime 7, which gets blown away in a Snow Leopard upgrade and is not included in new Macs with Snow Leopard. Users can get off of their Install DVD, though, so it's not a huge deal.
When exporting from QTA, I matched its settings (audio and video) with the ones I found in this document: http://discussions.apple.com/thread.jspa?messageID=12274888&#12274888 . QTA's export interface is actually QT7s, so at least that's familiar.
The only problem I'm having is that even though I set QTA to export at 29.97 fps, the exported files are still at 30 fps. A quick change in FCE upon import is the only thing I needed to use the file without rendering. I also had to change the fps setting on my LiveType files.
The only thing I need to figure out is to how to match up some studio-recorded audio with all of the above, so I don't have to render the studio audio and so it comes out at the equivalent of 30 fps. I think all I need to do is record at 44.1 KHz and I'm okay.
Of course, this is all my experience, and I realize others may not be able to work with this kind of setup. But I think this is an interesting workaround .. I wouldn't really call it a full solution, though, mainly because of the 29.97 fps versus 30 fps aspect.
One other quick thing: I'm not sure if this works without that $20 MPEG-2 playback component from Apple (thanks for that charge, Apple!), since I already had the component installed when I discovered QTA. Someone without the component, though, can download this and see if it works. If it does, then we all know that we don't need to spend the extra $20 for it to work.
If you decide to take the plunge, please let us know here. Thanks for reading.

@Tom and @Meg:
Thanks so much for your replies (speedy, too!). I especially want to thank Meg, who took the time to replicate the problem (which confirms to myself that I'm not nuts ). At least I know I have an ultimate "savior" in QT7 Pro.
Before I spend that final $30, though, I want to see if Tom can help, based on what the QT Inspector says about my .avi files from the Flip. Here's what it says:
VID00001.AVI
Format: Generic MPEG-4, 640 x 480, Millions
Microsoft ADPCM, Mono, 44.100 kHz
FPS: 30
Data Rate: 3408.53 kbits/s
Normal Size: 640 x 480 pixels
Current Size: 640 x 480 pixels (Actual)
(that's word for word, except for the source [file location]; wish I could figure out how to paste in the window from my Grab of it.)
I've already done the exports in the same way Meg indicated in her reply, trying all kinds of combinations. When exporting, though, I've always used DV/DVCPRO w/audio @ uncompressed 48k, and frame size @ 720x480 @ 29.97fps settings (saw those in another post here at the forum). I'm thinking those aren't contributing to my situation.
Whaddya think, Tom?
BTW, the biggest reason why I want to have the audio is to easily sync the audio off the digital recorder (I hook myself up with a lav mic) to the audio coming off of the Flip. I do the ol' "triple clap" trick to sync audio, so that helps -- thank goodness for audio waveforms in FCE.
Once synced, I then delete the Flip audio and move the digital recorder audio up to A1/A2 (although I delete the A2 audio channel). Sounds 1000% better than the Flip audio, as I record outside and the Flip mic picks up wind big-time.
BTW, Tom: I bought your book earlier this week. It's really, really good. You could teach an entire college semester class off of this book, and do it well. I'm getting to more of the lessons this week.

QT with MPEG-2 component & MPEG Streamclip VOB sound problem

It's two separate problems:
1) I can view VOB file but no sound using qt pro 7 with mpeg-2 component downloaded
2) that same vid opens fine in mpeg streamclip and converts nicely to .mov
BUT mpeg streamclip only sees the vts011.vob file
how do i process the _2.vob file? also the _3.vob file?
i do want 3 separate .mov files so I can upload to BlipTV.
the first .mov file was 860MB converting from the _1.vob file.
many thanks

It's two separate problems:.. 1) I can view VOB file but no sound using qt pro 7 with mpeg-2 component downloaded... 2) that same vid opens fine in mpeg streamclip and converts nicely to .mov
Everything is working correctly. The QT MPEG-2 Playback Component, as stated on the Apple web site, is a "video" component. It allows you to play the "video" portion of MPEG-2 "program" streams such as found in "muxed" MPEG, MPG, or VOB wrappers, as well as, elementary M2V and MOV files. Whether or not the audio is compatible depends on the audio compression format used. For instance, a "muxed" MPEG file containing MPEG2/MP2 data would play both video and audio because the MP2 (MPEG 1, layer 2) audio is natively supported by QT while a VOB file containing MPEG2/AC3 data would only play the video because the AC3 audio format is not natively supported by QT. On the other hand, the same file will play both the audio and video in MPEG Streamclip because MPEG Streamclip has built-in AC3 support. Further, MPEG Streamclip has the ability to "fix" timecode breaks frequently present in VOB program streams and can bridge the gap between content consiting of blocks of audio and video data interspesed in an single, spatially synchronized data stream without an extertal timing reference to multiple track streams of audio and video data which are, more or less, in an "averaged" synchronization at the frame level in terms of an external time reference. I.e., MPEG Streamclip provides a bridge between one form of multimedia technology and another. Contrary to the popular opinion held by many novice users here, "not all video technology is created equal."
BUT mpeg streamclip only sees the vts011.vob file... how do i process the _2.vob file? also the _3.vob file?
VOB files are simply file containers which are limited in size to approximatly 1 GB each for DVD use. A single VOB may contain multiple "TITLES" (representing independent movies) or multiple VOBs may constitute a single "TITLE" (representing an single movie). If you load (import or drop) a single VOB into the processing window, then MPEG Streamclip will process the individual VOB file independently. If you load (import or drop) multiple VOBs into the processing window, it will process all of the files as a single file. In addition, if the single or multiple VOB file(s) contain multiple TITLES, you can set "in" and "out" points to re-save and/or process the contained TITLE(s) as independent movies. In short, you should probably read the MPEG Streamclip Help file to better understand all you can do with this very powereful (but free) application.

Hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense.

hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense. I also found online that you need Apple Mpeg-2 playback component in order to use mpeg streamclip. Even though I have OS X Lion, should I download the add-on?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Mpeg Streamclip DVD settings for FCP...trying to preserve quality

I'm very new at editing, so please bear with me!
I am creating a director's reel for myself using footage on DVD. I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one, so please forgive me if it's repetitive! And obviously I'm stuck using the DVDs...I have no option to get the uncompressed original footage. Thanks!!

razini wrote:
I'm very new at editing, so please bear with me!
No problem, we all were at one time. Welcome to the family.
razini wrote:
I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
Shouldn't be. But transcoding form MPEG2 to DV can get messy. I use DVDxDV for unwrapping MPEG2 form DVDs.
razini wrote:
I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
You should not be rendering in FCP, this suggests your sequence is not set to be plain ol' DV.
razini wrote:
Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
If your clips are not anamorphic, your sequence is set incorrectly. Start with a new sequence and make sure it is set to DV.
razini wrote:
I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one...
Yeah, video is like that.
bogiesan

Why does De-interlacing looks better with MPEG StreamClip?

For our client we need to render 1080i for TV and 1080p for WEB. After creating graphics in AE we add final touch and audio in PR.
If we make it progressive in PR (CC2014.1) the zoom in the packshot does not look good.
However if we make the 1080i ProRes progressive in MPEG Streamclip the zoom does look great.
How is it possible a freeware swiss army-knife makes a better progressive export than commercial software?
Or is there something we do wrong?
Herewith links to the ProRes material:
1 1080i rendered from AE: http://gvs.ftpaccess.cc/_q8w_U9SXYWR6tR
2 1080p rendered from AE: http://gvs.ftpaccess.cc/_WSw7A_kh-W66sR
3 1080p rendered with PR: http://gvs.ftpaccess.cc/_dAxuZAvbVWP6AR
4 1080p rendered with MPEG StreamClip: http://gvs.ftpaccess.cc/_nQwqP-HqMWz6FR
Please do not use this material elsewhere except for testing purposes.
Thank you in advance!
Ivery Barel
Gooi & Vecht Studio - Netherlands
OSX 10.9.5. Mavericks

ok
just to illustrate the problem a little better, here's the actual difference
this is what I have in Lightroom after editing:
and here's what I get after exporting

Why do my DV files look better when played in MPEG Streamclip than iMovie?

My home movie DV files look washed out (compared to what my tapes looked like I played them on the TV years ago) when played with both iMovie '06 and iMove '11. The claim has been made that if I retransfer my tapes using iMovie '06 (rather than '09, which I used last time, or '11), there will be a dramatic improvement in the visual quality (and there will be some unspecified benefits if I set the dial to 48K audio). HOWEVER, if I play the files I already have in MPEG Streamclip, the visual quality improves substantially without any retransfer. Here is my question: Why? Why do my iMovie-imported files look better in MPEG Streamclip than in iMovie?
Here is my layman's answer: algorithms. When MPEG Streamclip encounters the exact same arrangements of molecules (or whatever), it has some plan for what to do with them that is smarter than what iMovie does. Is this another sign or way that iMovie is not well suited for DV?

Please go to my website where I have posted new instructions on working with DV.
This keeps both interlaced fields from FireWire capture through to a DVD. All the lines means no lost quality when editing DV or Digital8.
It also solves the washed-out color problem.

Batch processing in MPEG Streamclip

I have been given over 200 MPEG-1 clips with muxed audio to make a movie in iMovie. Dragging them right in will remove the audio, so I need to convert them to DV-PAL first
I tried MPEG Streamclip 1.8 and 1.9b2. The manual implies that I in "Batch List" should be able to add more than one file at the time. Not so. If I drag a bunch of files from the Finder into the Batch window, I'm asked what to do ("Export as DV"), where to save the converted files, enter conversion options and then I find that only the first file is added to the list.
So I tried the "Add Files..." button. "Files" is plural, but NOOOoooo. I was asked the same questions as above, but only the first file was added to the list.
Adding over 200 files and answer the same 3 dialogs for each and every one is tedious.
I have QT Pro, so I tried to create a "reference movie" containing a bunch of the mpg files. In QT player all clips play fine, but in MPEG Streamclip, only the first clip was converted. (sigh).
Now what? What is the magic trick to convert mpegs in batch mode?
Is there any other application that converts in batch?
Mac OS X 10.4.10, preferred language Swedish.
QT 7.1.6.

I have MPEG Streamclip 1.8, Mac OS X 10.3.9, QT 7.1.6, no Flip4Mac etc installed.
If I drag a bunch of files from the Finder into the Batch window, I'm asked what to do ("Export as DV"), where to save the converted files, enter conversion options and then I find that only the first file is added to the list.
With my setup all (five) MPEGs were added to the list and the conversion options were asked only once. And all files were processed.
So I tried the "Add Files..." button. "Files" is plural, but NOOOoooo. I was asked the same questions as above, but only the first file was added to the list.
With my setup all (five) MPEGs were added to the list and the conversion options were asked only once. And all files were processed.
Did you choose "Join all the files" in the conversion options? THEN only the very first input MPEG is processed (all the input DV files are processed, though). Seems like a bug with the MPEG input. But was that your problem?

Convert a movie from Quicktime to MPEG4 in MPEG Streamclip

I want to convert a movie from Quicktime (.mov) which I created in Final Cut Express to MPEG4 in MPEG Streamclip to be able to see it on my Samsung TV. The problem is that the uncompressed movie, comverted only from Quicktome to MPEG 4, stops almost every moment on my Samsung TV. I have connected an external harddrive in NTFS there via USB 2.0 (Samsung TV cannot play movies in HFS etc.). The uncompressed movies are bigger than 4GB in Quicktime.
I got the following information from Samsung (in German):
"Sie berichten, dass Filme zum Laden stoppen, die auf Ihrem MacBook Pro flüssig laufen. Bitte beachten Sie hierbei, dass der Fernseher hinsichtlich Rechenleistung nicht mit einem Computer vergleichbar ist. Weiters verfügt der Fernseher über einen USB 2.0 Anschluss, was die übertragbare Datenmenge ebenfalls begrenzt.
Die allgemeinen Spezifikationen für Videodateien finden Sie im Benutzerhandbuch ab Seite 248:
http://downloadcenter.samsung.com/content/UM/201112/20111208190112921/Web_GSDVBE UA_GER.pdf
Auf Seite 251 finden Sie für MPEG4-Videos folgende Beschränkung: Bei "mehr als 1280 x 720: max. 30 Frames".
Als Alternative schlagen wir Ihnen vor, Ihr MacBook Pro per HDMI direkt an den Fernseher anzuschließen, die Videos auf dem MacBook Pro abzuspielen und den Fernseher als Monitor zu verwenden. In diesem Fall entfallen die vorher genannten Beschränkungen."
I ask here how to use MPEG streamclip (free version; I use 1.9.2) so convert my movies into MPEG 4 so that I cann watch it on my Samsung TV.
I filled out "Bildrate" "30" but this did not work. I have chosen less quality but there are still - less - interruptions and I find it laborious to test different versions of less quality so that it might work.
I ask you also because I want to create my movies to give it to other people via the internet (f.i. via rapidshare) but I need a smaller size of my movies and do not know all the different TVs my friends have. I cannot imagine that it is not possible to create a movie in MPEG 4 that cannot be seen in many TVs via an external harddrive?

I know that I can do that also in FCE. It takes much more time to convert a movie into MPEG4 than to export it as uncompressed movie in QuickTime which I can use f.i. in iDVD to burn a DVD or watch it on my MBP.
But I don't know the versions of TVs of other people if I want to send them the movie via internet f.i. via mydrive.ch etc. which have limited space if used for free. So which settings to choose for an output in MPEG4?
For my one use it is o.k. if the movie can be seen correctly in MPEG4 on my TV but I can also watch it via my MBP on my TV via HDMI.

Is MPEG Streamclip OK with the new QT update?

hi there~!
before installing MPEG Streamclip 1.7... i'd like to know if those of u having it installed already are having problems with the new QT update.....
are there any conflict issues?
ur comments are very welcome...
thanks

before installing MPEG Streamclip 1.7... i'd like to know if those of u having it installed already are having problems with the new QT update.....
are there any conflict issues?
Have only converted one file since updating OS, QT, and iTunes over the last 24 hours. Haven't noted any problems myself. Here is a link to the media file I converted if you want to judge for yourself. (Probably not the best material and settings, but should be representative.)
http://homepage.mac.com/jrwalker4/Media/Superman/4-01_JOEY.mp4

Mpeg streamclip jvc fcp

HI all.
I have a JVC everior. I have read all through the notes all over the internet, my problem though is this. I have transfered the files from the camcorder as they were recorded. When I watch them in mpeg streamclip before I even transcode them, they look like they are de interlaced sometimes, lines go through them. Now when I export, the quality is terrible. I have tried no compression to MP4, and a few other formats including quicktime/prores 422.. Nothing makes the quality how it shows up on the camera.
Does anyone have any kind of experience with the everio and how to get this to work? I hate the camera and am getting a new one, but I have footage my sister wants of her son..
so any help would be great
bret

the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

MPEG Streamclip doesn't keep the original timecodes

I have a a ton of ProRes 4444-files that I want to re-encode to ProRes 422 LT for offline editing (we have limited space on our XSAN at the moment, that's why we use 422 LT instead of the 4444's).
I did this convertion in MPEG streamclip as it encoded quite a bit faster than Compressor does with the same files. And time was of the essence. But the resulting files does not have the same timecode as the original ones. They all begin at zero hours. I've googled the heck out of this but can't find anyone with the same problem. And there does not seem to be a preference to keep the timecode tracks in the export window.
Anyone know anything about this. If it doesn't keep the timecodes the same as the source files their useless for the offline-online workflow.
Cheers!

This is what the MEDIA MANAGER is for. Recompresses the footage, keeps ALL the metadata.
Shane

MPEG Streamclip problem

Similar Messages

Maybe you are looking for