MPEG2 and jump points

I have PE7 and a high def' camcorder, a DVD writer but no Bluray writer. I also have a full HD TV. PE7 is great at producing DVDs and I widely use the facility to include "jump points" so I can migrate to a point within the DVD with ease. It all works very well.
I have dropped videos to MPEG2 1440 by 1080 on a USB stick and when viewing the results on the full HD TV the results are trully amazing. I cant believe the quality.
However, I cant figure out how to create the same effect as "jump points" within an MPEG2 stream. Do I need to produce "chapters" (and its not clear to me what these are) and if so how do I do so.
Any advise warmly welcome.

I'm not quite sure what you're asking, andy.
You say that you are successfully creating chapter points when you produce a DVD.
You won't be able to add chapter points to an existing MPEG though. Not without putting it into Premiere Elements and then transcoding it to a DVD. (Although then it will no longer be a hi-def MPEG, of course. It will be a DVD.)
Is that what you're asking?

Similar Messages

My trackpad is not final and the pointer jumps around the screen

my trackpad is not final and the pointer jumps around the screen I wonder if physical or software problems
my macbook pro is 13 mid 2012 model: MacBookPro9, 2
so mountan lion
About a week ago I have this problem and I worry as much care and not my mac n golpiad never fallen so surprise me either physical appreciate your response as soon as possible

this happened to me and what i did was let it go flat and then charge it and it worked. i dont know if this will help but this is what i did when my phone went black.

Problem - Title Cards in Vid Track 2 Skewing In and Out Points in Track 1 ?

Hi,
Vast confusion. I'm working with edits in a timeline, created from video files that are "Avid Meridien Compressed" Quicktime Files. These are files that I exported from Avid. They are 24P files. The timeline has been set to 23.97, and everything in Video Track 1 makes sense, no problems, no render line because the project compression settings have been set to "Avid Meridien Compressed".
Ok, so here's the problem. I am creating title cards with the video generator in FCP, and trying to super them into my edits by placing them into Video Track 2. But the moment I drop a title card into Video Track 2, (over an edit I have made in Video Track 1), there is a SHIFT in the in and out points of the source video in the timeline. For example, let's say an edit in my timeline has a source in of 02:02:30:17 and an out of 02:02:35:17. The moment I try and drop a title card over this edit in Video Track 2, the source video in Track 1 shifts, so it now begins at 02:02:31:29 and ends at 02:02:36:29.
It is as if the title cards refuse to conform to the 23.97 timeline, and are overriding the source video edit decisions in Video Track 1.
Does anyone have any thoughts on why this is occcuring? Does anyone have any suggestions for a remedy? BTW, I have also tried creating title cards in photoshop and dropping them in, but with the same result: it changes the source time code edits by shifting them later into the source video.
Thanks,
Mtbakerstu

Update!
While I was never able to get the Vid Track 2 title cards to stop shifting the edit decisions in Vid Track 1 when using the preset that is in tandem with the actual source video files (Avid Meridien Quicktimes at 23.98), I did find that by changing the Sequence Setting to DV/DVCPRO50 NTSC at 23.98 that I could drop the titles into Vid Track 2 successfully without any skewing of edit decisons. You now have to render the timeline, but a quick test of an MPEG2 export showed that there's no denigration in image quality with using this setting.
So that's the scoop. It seems that there's no pure solution to this issue. Perhaps if there's a way to generate title cards out of Avid that are importable into FCP, that would do the trick, but I haven't taken my research that far.
Thanks for your help!
Stuart

Mouse stuck and jump

I have a Mac Pro (2010) and I having an annoying problem with my mouse and my tablet. The pointer stuck and jump. Retouching photos is an nightmare with this problem. Does anybody know how to fix it.
I disconeccted my tablet and the problem still there.
I changed the mouse and nothing...
Help please!....

I dont see this happen on my system. If will be great if you can do the following test:
- Close the timeline and then play the movie using Menu / Keyboard shortcuts? Both playback and stepping frames.
That way we can know if it is a timeline or a stage issue.
-Sujai

DVD and mouse pointer stutter

I recently experienced problems with playing DVDs AND my mouse pointer (trackpad). The DVDs are interrupted with subtle pauses, which make it ratehr unpleasant to watch a film. The mouse too is interrupted, stops in the flow and then jumps back on track. haven't experienced difficulties before, but I had recently installed a USB Modem (+software) to get online, but it never worked. I deinstalled, however, the "stutters" in DVD and mouse pointer persist. I ran Disk Repair - nothing noted. Any ideas?

How did you solve this? I'm getting this on my mouse, my DVDs and, sometimes, on my downloaded video.
I recently upgraded to QT 7.4.1. I've heard there are problems with that upgrade. Any ideas?

Setting in and out points in list view.

I am in list view. I am showing several favorited clips from one video. Say I am playing back the third favorited range and I want to select in and out points for that favorited range. The video is playing and I hit i. I am immediately jumped from the favorited range I have selected to the first favorited clip in the list. When I click back on the clip I was setting the in point for I find that it has set the in point where I wanted. The entrire process then repeats when I try to select the out point. Set out point. Jumps up to first clip. Click back on original clip to get to my out point.
This is very frustrating and makes using favorites and list view a huge waste of time. Can anyone help?

That should not happen. Before anythign else, do these two things.
1- Go into the "Final Cut Pro" menu, "Command", and be sure "Default" is checked. Quit out of FCP X.
2- Open System Preferences (Apple menu), Keyboard, Keyboard Shortcuts. Click the "Restore Defaults" option. The issue here is OS shortcuts will override app shortcuts.
3- Launch FCP X and try again. If that doesn't fix it...
4- Download the free app "Preference Manager" from Digital Rebellion (dot com) and use it to delete the FCP X pref files.
After you've done all of these, report back and let us know what's up.

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve
Any one can help me

Thank you for your response - I'll give it a go.
Also, just to update, my iMac cursor seems to glitch a little bit less now. It seems that at least ONE of my problems may have been caused by sitting my iPhone upon my WACOM tablet. The tablet must receive some sort of disruption from having my phone on it - and removing it seems to remedy a fraction of my mouse-jumping problems - if only for a meanwhile.
The mouse cursor still does jump around on its own occasionally, and the other mouse problems do persist - so this must not be the only culprit for my array of problems.

Markers and Locate Points

I want to be able to set points in a song that I can jump to directly without having to scroll through the timeline. In the tape world, this would be a locate point. In other DAW's I've used, it could be called a locate point or a marker. I looked up these terms in Garageband's help, and there's only some stuff about podcasts. Anyone know if/how this can be done in GB 4?

Thanks, but that doesn't quite do it. I'm trying to figure out if there's away to define your own points in a song and jump directly to them. Either that, or is there away you can jump from one Arrange region to another directly without scrolling through the timeline? As I said, this would be called a locate point (e.g., for punching in) in the tape world, and in many other DAWs is called a marker.
TIA

Ipod restarts and jumps around in songs

When playing back songs both of the new (4th generation) I got for my kids for Christmas restart and jump around in the songs. The song will start playing and a random point it restarts then after playing a few seconds it might restart again or jump to another point in the song. It happens on any song played. We are using iTunes 10.5 and the i pods are up to date, the songs played (and still play correctly on their iPod Nanos, 5th generation) Resetting them doesn't make any difference! Any advice or help would be appreciated!
Thanks!

Welcome to Apple Discussions!
See if this helps/applies...
http://docs.info.apple.com/article.html?artnum=304490
btabz

MS6167 + Geforce MX440 - flickering and jumping screen

I recently bought an Inno3D Geforce MX440 64MB DDR for my MS-6167 motherboard. The screen was flickering and somtimes jumped too. I thought the Gfx board was bad and returned it for a Palit Daytona Geforce MX440 64MB DDR. The same behaviour turned up and I understood this had nothing to do with the graphic card. When I looked into the Nvidia configuration it told me 'Bus type: APG 1X'. I knew that my motherboard was 'AGP 2X' so I wondered why this was happening. Both those cards are AGP 2X/4X.
I suspect that the AGP speed is causing this. Why is the screen otherwise behaving like this? What possible cause could it be?
Sometimes the mouse pointer gets garbled. I'm running Windows XP Pro Swe.

I changed driver for the AMD-751 from 'AMD-751 Processor to AGP Controller (AMD)' to 'PCI standard PCI-to-PCI bridge'. Then it works better.
Maybe the performance isn\'t as good as it should be, but the flickering and jumping screen is gone.

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Function Modules for creation of characteristics and Measurement Points

Hello everybody
I'm new in ABAP (trainee) and especially the use of characteristics. I'd be very happy if somebody could help me :).
Can anybody out there with some experience in creating characteristics and measurement points tell me how to create them with function-modules or by changing database tables?
I'm happy about every hint and ready to give some reward points.
Best Regards,
Steffen

FM and TABLES
http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful..........................
Minal

Calculation of Safety Stock and Reorder Point under Forecast Model T

Hi Gurus!
Happy Holiday!
I would like to ask for your assistance on how the the safety stock and reorder point was calculated with the following values available. I would really appreciate it if you could give me details on the calculation.
Below are the values:
Basic data
Forecast date        01.12.2009        Unit                  CTN
Forecast model       T                 Service level         0.0
Period indicator     M                 Paramtr profile
Control data
Initialization                                Tracking limit        4.000
Model selection      A                 Procedure selection   2
Parameter optimizatio                Optimization level    F
Alpha factor         0,10               Beta factor           0,10
Gamma factor       0,00              Delta factor          0,30
Basic value           5.464-           Trend value          5.603-
MAD                      4.758            Error total              4.722
Safety stock         1                   Reorder pnt.          1
No. of values
Consumption           6                Forecast periods       1
Initial. periods      0                Fixed periods          0
Periods per season   12
Historical data
Period                Original     Corrected value
11.2009                3.000              3.000
10.2009                0.000              0.000
09.2009                0.000              0.000
08.2009                9.000              9.000
07.2009               21.000             21.000
06.2009               20.300             20.300
Forecast results
Period                Original     Corrected value
12.2009                0.000              0.000
Appreciate your assistance!
Thank you and Happy Holidays!
Ji

Sweth, you are asking for consulting, and in my opinion it is way beyond what can or should be reasonable to achieve in such a forum. You are asking complex questions, that most probable have more than one possible answer.
I suggest that you get on-site help from a knowledgeable and experienced consultant. These are crucial business issues, and should be dealt seriously.

Safety stock and Reorder point calculation in inventory planning

Hi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
Puneet

Hi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
Puneet

MPEG2 and jump points

Similar Messages

Maybe you are looking for