Mpeg2-dvd render color stripe on right side

When I render HD720p video to mpeg2-dvd (23.976) I end up with a thin color stripe on the right side of the output video. The stripe usually appears wherever I have a crossfade between images/videos. How can I solve this problem>

Thanks Ann,
I have not had this problem since upgrading to CS6. This is my 40th project and the only one with this problem, so far. I've check and rechecked everything and the compositions/setting, etc. are consistent from project to project. All comps and source files are 23.976. No scaling was used.
As you suggested, the issue is with the crossfade. Unfortunately, I cannot always overlap the clips because of the audio portion (I need to crossfade the video only). These are people interviews where I've had to edit out a short segment (say 7 seconds), then rejoin the clip by butting then together to reconstruct the audio. Any ideas for thIs?
Thanks again,
Steve

Similar Messages

Picture corruption - color bar on right side.

My basic setup is as follows.
Running XP Pro and Photoshop CS3 (including Camera Raw plugin 4.4.1)
Run above software with color management profiles for 2 monitors, LG L1710B (1280 x 1024 resolution) and Eizo CE210W (widescreen display) (1680 x 1050 resolution).
Display adapter is Radeon X1600, with Catalyst Control Centre and driver (maintained up-to-date with latest release).
The observed problem exists ONLY when running Photoshop CS3 (although RAW files are accessed also by other software).
Under Photoshop, RAW files may be opened in one of 2 ways.
A) Opened in Camera Raw through Bridge CS3:
B) Opened in Camera Raw through Photoshop CS3:
All RAW images opened under Bridge CS3 display perfectly on both monitors.
Images opened under Photoshop CS3 and displayed on the L1710B monitor are satisfactory.
All RAW images opened under Photoshop CS3 and displayed on the Eizo C210W monitor show the fault. Please note this relates ONLY to RAW images - no problem with tif or jpg. Also, when the picture is later saved (as tif or jpg),it does not contain the erroneous color band - the problem appears to be one of diplay only!
To explain the fault: the defect appears as a vertical stripe positioned on the right side of the PICTURE area, of slightly different brightness/color shade to the main part of the displayed picture.
I have referred the problem as fault report to:
1. AMD re Radeon adapter/driver and Catalyst: they have investigated over a 4 week period, and reply that the problem is elsewhere.
2. EIZO re Monitor (no separate driver outside of Windows), who say the problem is not monitor related.
3. Adobe re Photoshop, who relate the matter to AMD as supporters of the display driver.
4. AMD have (in the past) suggested that it is not a problem for referral to Microsoft!
Therefore STALEMATE! How do I get this resolved?
After long and careful tests I have undertaken, I have a theory on the cause of the problem which goes so:-
I believe the image on the Eizo is properly being color corrected with the color profile applicable for that monitor. However, I believe the size of the color correction mask being applied is being taken from the screen parameters of the L1710B display. This results in a color correction "overlay" area of 1280 x 1024 being imposed on the Eizo screen of 1680 x 1050 - justified from the left edge. This causes a strip on the right edge of (1680-1280) 400 to appear non-color corrected! In actual practice, the position of the left edge of the color stripe does appear 3/4 way across the screen, which supports this postulation! Also, if I vary the color profile, the screen effect (tone wise) does slightly change, causing the stripe to either more or less prominent.
I would personally conclude the matter to be within Photshop CS3. The fact that the RAW module running under Bridge produces NO PROBLEM, while the (same) RAW module running under Photoshop produces the fault suggests to me that the RAW module is being preconditioned in a different way by the respective softwares.
I will be pleased to benefit from thoughts of others - and also to receive ideas as to where I should next direct my fault reports.
While I am at lease able to view/process RAW files through the Bridge route, in an ideal world I should be able to do the same though Photoshop!
Thanks - Eric

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

I have a discolored strip the right side of my mac book screen

I HAVE A DISCOLORED STRIP ON THE RIGHT Side OF MY MAC BOOK SCREEN

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Acrobat 8.1.2:scanning to pdf produce problem of appearance of black strip on right side of pdf doc

I am using licensed Acrobat 8.1.2 Professional at notebook with XP Pro. I have trouble creating a PDF from scaner by using Acrobat 8.1.2, because of appearance of black strip on the right side on each page of pdf doc.
Any help would be greatly appreciated.
Thanks,
Oleg

I hope this isn't a dumb question, but is it coming from the scanner? We have to watch two things when scanning on our Canon 5020s.
#1 Make sure the sidebars are as tight as possible, including making sure the stack of paper is very clean and straight and tight.
#2 There is a setting in our scanner called Margin. It corrects for things like manufacture defect. If we leave that setting alone, we get a small black edge. We have it set to -2 to decrease the scanning area. This fixes that problem.

Black or multi-colored strip an right hand side of copies

My C7280 was not used for two weeks. When I returned home, the printer prints a black or multi-colored line about 1/2 inch wide down the right hand side of the copy. I ran the print dead cleaners three times. Any ideas what is wrokng?

Hi peggymay.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having issues with black lines on your scans or copies. I have had this issue myself on my very own 8600 and I was able to get it resolved. The issue actually stemmed from two locations and with any luck we can get this issue resolved for you. First thing to look at is under the scanner lid. Lift the scanner lid and to the left of the large scanner glass, you will see a small strip of glass. Please take a light glass cleaner and a lint free cloth and clean the small glass area as well as the big glass . On the under side of the lid, you will see a white plastic strip. Please clean this as well. IF you have already done these steps then please move on to the next step.
The printer power cable needs to be connected to a wall outlet and NOT a power Bar/Strip. HP printers already have a built in surge protector and if you have it plugged into a Bar/Strip, the printer will NOT get all the power needed to function properly and it will cause issues with scans or copies and it could even generate false error messages on the printer display screen.
Please try these steps and if they work, Fantastic. But if they don't, please feel free to write me back.
Thank you so much for your time. Always happy to help.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Color running on right side of entire paper

why are all of my documents that im printing have color running on the entire document from top to bottom. i used the icon on the printer to perform a cleaning and the color still running on the entire paper

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

Color Laserjet 3600 PQ print quality test pink shows faded on right side

All the color print outs have this somewhat faded color on the right side.
When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
what else can i do to fix this?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

The bottom part of display whiter than the rest, white on right side more brownish

So I got a new replacement of my Thunderbolt Display, this time the one I got is straight (previously left side was lower than the right side), however I can see in new one that the bottom part of the display seems to be more white (you can see a slight horizontal line at the bottom) and also on the right side of the display white colour seems to be more brownish.
I have been wondering if that is acceptable for Thunderbolt monitor? Is that a backlit bleed on white? Can you see anything on the photo I have made or am I going slightly mad?:) Please help.

The display uses LED technology which means there will be some bleeding or clouding of light on dark backgrounds (mostly from the edges). You should not have any brown color on the right side as your image shows unless perhaps you need to make some adjustments on your graphics card. I use mine with a 2012 Mini and it has good colors.

Colored band on the right side of the DVD encoder

When a project renders in Media encoder to get a file mpeg DVD 25p, in some places a vertical band appears on the right side, sometimes blue, sometimes red or white.
From what can be?
Ginxi
[Translated to English for searchability.]

Can you post a screen shot so we can see the problem?

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

Regza LCD HDTV 52XF550U has wide black stripes on the right side

Hi, my 2008 REGZA LCD 52XF550U has wide black stripes on the right side. I think the problem started within 24 months from my purchase. And the stripes are getting wider.
I have tried to reset the setup, power off and on, all to no avail. See attached picture.
If someone can shed light on this problem and its (preferably permanent) fix and approx. cost, it will be greatly appreciated. I could simply chug this Toshiba LCD and buy another non-Toshiba HDTV, but I think that would be wasteful if it can be fixed.
Regards,
Attachments:
REGZA 52XF550U black stripes.JPG ‏109 KB

I also have the same problem. I have had the TV for about 4 years; started right after third year. I have not been able to fix it either....Time to buy a new TV, but defintely not a Toshiba!
Attachments:
photo.JPG ‏2917 KB

Stripe on the Right Side of Tasks Card

On my tasks card there is a brown woodgrain stripe running from the top to the bottom of the card on the right side. It obscures the task count. When I go to the individual task or a listing of all of my tasks it disapears. What is it, what is causing it and how do I get rid of it? Thanks

Eddd wrote:
On my tasks card there is a brown woodgrain stripe running from the top to the bottom of the card on the right side. It obscures the task count. When I go to the individual task or a listing of all of my tasks it disapears. What is it, what is causing it and how do I get rid of it? Thanks
Hmm...when I have an open task in my tasks app, the number appears to the left of the stripe.

Pb G4 1.67Ghz running OS 10.4, right side of the screen 2, pixel wide vertical lines, a few days later colors posterized on pics and vid. Vertical lines don't show screen capture, but pics still posterized. Hardware test from disk shows ok.

Right side of screen started showing 2, pixel wide vertical lines. A few day later colors in pics and vid posterized. Vertical lines don't show in screen capture but pics still bad. Ran hardware test from disk, ok, adjusted color in sys prefs, new profiles a bit better but still bad, mpeg worse, jpeg bad. No better in new user account. Now a month later, right side has 8 vert lines and occasionally a slightly darker area in bottom corners for a few seconds. Reset pram, battery plugged into adaptor 99%. I can notice, for a slit second, when the screen saver is on, when I move cursor to get back to desktop, true color of image can be seen for a flash of a second.

sorry, was in a rush, any suggestions to fix or ideas of what has gone wrong

Issues with color panel and other windows on right side of flash

Ok the issue I'm having with flash is that the windows on the right side of my flash window do not snap up when I collapse a window. I am attaching a screen shot to better explain this issue.
As you can see I have the color panel collapsed up, when I expand this panel and it goes down everything shifts down. however when I collapse it back up a huge gap is left behind in CS5.5 as is displayed in screen shot number 2. In CS4 I never had this problem. I could expand and collapse panels as I saw fit with no problems what so ever. Everytime now that I expand a panel and collapse it, the library or other panels do not move up with the collapsing. This causes a workspace issue. and forces me to drag up the library via the black line that is just above it but below the align panel so that I have better access to my library or properties panel for when I'm working. I find this highly annoying and would like it if there could be a fix produced to make it so this collapsing issue can be fixed and I don't have to waste time dragging up the library/properties panel everytime I need to access stuff in my library when I have a huge list of graphics I'm going through.
Thanks
h_cline2

I already tried that, first thing I thought of before coming to the forums for a solution.
Thanks anyways.
Any other ideas?

Line Out (Lime Color) Right Side not working.

I plugged in a 3.5m into my Line Out, I have it connected to my stero aux. My stero is working fine and everything with the sound is working right. No shortage in my wires. When I plug it into my Headphone jack it works fine but in my line out the right side only works but the left side sounds really really low. I have adjusted the levels and balance.
I think that the Maufacture must of missed up on the line out size. That's the only thing I can come up with.

this has happened to me. What part do I need to ask for in the shop. My sound was muffled, but I removed the speaker plug from the back and put it in the headset in the front and the whole thing is great now. I just need to now what part I need to ask for so I can fix it. I will google how to do it.
7 - Audio: Line Out (lime)
Heres my specks
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01486318&lang=en&cc=us&taskI...

Mpeg2-dvd render color stripe on right side

Similar Messages

Maybe you are looking for