MPEG2 frame size areas greyed out :(

I need to take a QuickTime file that was rendered at 864x486 and make an MPEG2 out of it to playback on a PC onto a plasma screen. However, every MPEG2 I create in Compressor changes my frame size to 720x480. The frame size controls are greyed out and will not let me change this. I am not creating a DVD, but I DO need to create an MPEG2. What am I doing wrong?!? I've read different posts on here that say to duplicate the setting so you're not changing the original, and I've done that. Nothing seems to work.
G5 Mac OS X (10.4.3)

Dave
As Silal mentioned, you are probably best off with H.264, the settings in Compressor for MPEG-2 are for DVD and HD DVD sizing.
Make sure you set it for the highest settings and 2-Pass (may take some time) but it really can do an excellant job. Of course the PC needs to meet the specs to play back H.264 properly. As an aside, the 720 x 404 when used is not too bad. I have run component cables from my DVD Player to a 16:9 TV and it looks good. You may want to try a test.
Drew

Similar Messages

When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

I go to print and try to select the radio button to print all frames, but It's not working

The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

Newbie: In printing dialog, "Scale to" size options are greyed out

I am in the initial stages of figuring out how to use Aperture (v1.5). I am currently trying to make a 5x7 print of a photo.
In the print dialog, "Scale to" 4x6, 5x7, 8x10 size options are greyed out (only "fit image" and "fill entire page" are available).
I've tried searching through the forums, but to no avail...
Thanks!

Click the Arrange button on the toolbar and select the desired option.

Photoshop CS3, wanting to batch re-size JPGs, going: file-scripts-image processor, the batch images are greyed out can't be highlighted

Hi - I am trying to batch re-size JPGs in CS3. I go: file-scripts-image processor and select a batch of JPGs but these are greyed out and can't be highlighted, therefore can't be re-sized. This function worked in the past and suddenly does not. Reading forums on this topic I find I should remove/trash 'Photoshop Preferences'. But I am struggling to find Photoshop Preferences. Really would appreciate simple instructions written for the layman not a computer savvy individual, on how/where to locate these, please. Many thanks.

A few things to try.
1)Since jpg's are finiky with bit modes, make sure your mode is in 8-bits per channel only. (found in the image>mode menu)
2)you could try resetting the preferences by using the 3 modifier keys at startup. ctrl-alt-shift(windows) cmd-opt-shift(mac) Hold these three keys down when you start photoshop if done right when photoshop starts you should get a dialog box asking if you want to reset the preferences)
3)If these do not help specify the version of photoshop, what OS you have and its version. Then someone can tell you the location of the preference files since it is different on windows vs. a mac.

I want to print. 'selection' and' print frames' are greyed out.

I want to print info on a page. 'selection' & 'print frames' are greyed out.
== This happened ==
Every time Firefox opened
== forever

Hi,
My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
It seems to be connected with the way that Hotmail handles frames.
(Thought I would post it as posts like this have helped me a ton in the past :0))
'''To print a selection in hotmail you need to do this.'''
1/ On the email you want to print click the small Printer icon in the hotmail menu.
There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
2/ A new page will open up and the printer dialog box will open up.
Close the printer dialog box.
3/ Highlight the text selection that you want to print on that page.
4/ Press Ctrl-P on the keyboard.
5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
Your selection will now print.

My new filters tree flames and picture frame are greyed out and not available?

my new filters tree flames and picture frame are greyed out and not available. what do I need to do?

It's likely that your graphics card/GPU does not support the new feature. If you are using an older video card or an integrated graphics card that is not new like the Intel Iris or Iris pro than that is likely the reason.

Some options are greyed out in Captivate 8.0.1 and my bullets do not work?

Hi, I am using Captivate 8.0.1 and am having trouble with 2 things:
1. The bullets and indents that I have formated for my responsive project appear very messed up and not as I have formatted when I view my project in Edge Inspect?
2. Some options in the TOC are greyed out (that I really need for my project). These option are to upload an icon and to align the position of the TOC (It wont let me align to the side of my project as the only option available is for 'overlay'.
Any ideas on how to fix these problems would be much appreciated.
Thanks!

Hi there
Captivate 8 introduced the first "Responsive" type of project. And in these types of projects, certain things simply won't work in the output. Henceforth, their options will often be disabled (or "grayed out"). The TOC appears to be one such item. The only option is to use an overlay TOC. I would suspect that this is because of "responsive design". Since the output will be adapting to differing screen sizes, I'm guessing that adding an additional 250 or so pixels for a TOC could prove troublesome and would likely throw off all the other design elements.
Where exactly are you finding you are not capable of uploading an icon? I see that I'm able to upload icons that represent the collapse and expand gizmos, but you may be in a different spot.
Cheers... Rick

Framemaker 11 and Robohelp 10 licensed versions usedlinking the Frame files is greyed out

Framemaker 11 and Robohelp 10 licensed versions used. Options for linking the Frame files is greyed out. Also, updae book and file options are geryed out. Please assist.

Linking between Fm and Rh is only an option with the full TCS suite, not if you purchase the components separately.
It might be worth speaking to Adobe to see if you can get a deal on upgrading to the suite as you have already purchased two components.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When I try to import mov files into iMovie'08 (7.1.4) the files are greyed out. Any suggestions?

When I try to import mov files into iMovie '08 (7.1.4) the files are greyed out. Any suggestions?

Hi Appleman - thanks for your guidance.
OK RealTime Inspector: Dimensions of my clips - as I don't know which bit this is I will list everything under Inspector, including Format:
00117
00117
33.30
Format:MPEG-4 Video, 1280 x 720 millions
AAC, 2channels, 44100Hz
FPS29.97
Data Size2.57GB
Data Rate 10.20 Mbits/s
Current size 1280 x 720 pixels (Actual)
And re the types of tracks you mention that iMovie '08 can't import, I don't much about film clips so haven't yet made sense of this, tho I do see that the clips are organised into chapters, so presumably this is 'chapter tracks'?
Thanks - I'll await your further instructions :-)

HT4914 all my songs ive uploaded from my hard drive are greyed out and wont play on my phone. any advice?

all my songs are greyed out and wont play

Turn on the iCloud Download column in your song list in iTunes and that way you'll be able to see what has been copied to the cloud and what hasn't.
What is the size of your music library and what is the size of your hard drive?

Text wrap options are greyed out

Hi,
I am trying to create a "drop cap" by selecting a text box and changing the wrap options in the inspector however, the "object placement" options to wrap the text are greyed out and I can not change them, except for the options below, such as "object causes to wrap" check box and the "text fit" boxes.
Is this a glitch? I have restarted both my program and whole computer, as well as tried it in a new document, and it still is coming up greyed out.
HELP, I have a project due and I need to be able to add in drop caps!
Thanks

Hi Architecture Guy
Welcome to the forum.
A better method for creating drop caps:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=85&mforum=iworktipsn trick
Peter

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them. I can not click on those songs and when I eject the phone they are not on the phone.

I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them. I can not click on those songs, delete or anything and when I eject the phone they are not on the phone. I tried to re-add the songs and it says it can't add songs because they've already been added. So HOW can I get the songs to actually ADD to my phone to where I can listen to them? It's like they're stuck in Sync limbo or something! Any help would be greatly appreciated.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

I transfered my purchases from my iphone to my mac. All transfers completed. One particular album shows up on the phone but the songs are greyed out and don't play. Itunes shows album as purchased but album is not in my Mac library.

I transfered my purchases from my iphone to my mac. All transfers completed. One particular album shows up on the phone but the songs are greyed out and don't play. Itunes store shows album as purchased but album does not show up in my Mac library. How can I retrieve the album.

So i've found the answer to this by clicking on every menu and setting in the itunes store. It turns out some purchases in the cloud can be hidden probably as the result of an interrupted transfer/sync/backup or a network outage. To unhide purchases 'greyed out ' items , go to the Itunes store (on the PC) click on your account name and select view account. (you'll be prompted for your itunes password) once you are in scroll down to the purchase history section. there should be an option for hidden purchases. click through and click on unhide purchases, redownloadble purchases. any hidden purchases will then show up. click on unhide to reactivate and download. This may only work for purchases in the cloud.
hope others find this useful.

IMovie: My options are greyed out in content library. Help!

I have iMovie 10.0.6 and I have used iMovie in previous versions. When I go to window > content library all the options are greyed out. How do I fix this?!

anyone?????

MPEG2 frame size areas greyed out :(

Similar Messages

Maybe you are looking for