Mpeg2 issue ---- muxed files

I'm having an issue with my Quicktime Pro with the MPEG2 plugin.
When I open this file format: MPEG2 Muxed, 480 x 360, 29.97 FPS, it plays the first few seconds then freezes the frame. The audio still goes on but I have no picture.
Now on the website for the MPEG2 plugin, it says that QT will play MPEG2 files muxed and all, but it's not for some reason ^_^ And also I want to pull those files into iMovie HD (iLife 05) and it doesn't want to pull in the files either.
I have found that Toast will actually make me a DVD no questions asked, but I'm looking to edit the videos. They play in VLC fine and will transfer over to MGEG4 alright, from VLC, but the more I step on the footage and compress and recompress, the crappier my video looks on the TV.
Can anyone help me find out how to get my stuff to play or be able to edit with-out all this recompression? Right now I have to convert to .mp4, insert into iMovie, fix, export to iDVD and compress back into an MPEG2 DVD friendly. Or....go from .mpg to BitVice and try to edit in iMovie with .m2v when it just mysteriously doesn't want to work this time with .mp4.
I'm getting a little frustrated! Can you please help? Thank you!!
Dual 2.3 Powermac - October Mac OS X (10.4.6) 23" Cinema

I have found that Toast will actually make me a DVD no questions asked, but I'm looking to edit the videos.
What kind of editing do you wish to do? If all you need is limited editing capabilities (e.g., trimming segments, cropping and/or scaling, adjusting the volume, brightness, contrast, and/or saturation), then a free application like MPEG Streamclip (woring in conjunction with the MPEG-2 component which you already have) may be all you need. Note however, that if you wish to work entirely withing the MPEG "muxed" file format, you will be limited to just trimming your segments and saving them. Other editing capabilities mentioned are usually performed as part of a conversion process. If you wish to perform more complex edits, apply special effects and or mix the media with phtographs, music, add transitions and/or fades, etc,. then you can use this application to convert both audio and video to either a continuous DV stream (compatible with the current version of iMovie) or segmented DV streams (compatible with older versions of iMovie).

Similar Messages

Can't get real time playback with Cineform 3D muxed files

Hey all,
AE user for 20 years but new to PP. Getting it setup for a sterescopic editing system.
Problem: 3D (1920 x 1080 29.97) fies created in FirstLight...won't play in RT in PP or Firstlight for that matter.
I am feeding an external passive stereo monitor via HDMI 1.4. I have MPE enabled. I am using a Cineform preset sequence. I have a fairly fast raid for the media. But it won't play in RT. Even lowering the resolution doesn't seem to help much. Is there something I am missing?
While it could be a hardware problem, I doubt it. Because when I play the 3D muxed files in Windows Media Player, and drag it over to my 3D external monitor, it plays just fine...like silk in RT stereo. (minus the metadata of Cineform of course) But in PP or Firstlight...stutters.
BTW, is there window inside AE that lets you know the actual framerate you're getting on playback, like AE?
Please, any suggestions would be helpful...this new 3D edit system is no good to me now. Thanks in advance.

Last I have heard there is a bug in Cineform's preset/player right now where it is not using the acceleration at all inside of Adobe. That was with files that were converted from Red to Cineform however the performance even at 1080 was horrible. Cineform seemed to process the material at the resolution it was rather than what is was set to scale. I would not be surprised if the 3D playback is doing the same thing. You need to contact Cineform on this one. If it's happening in First Light then the issue is with Cineform's player.
BTW the work around in 2D is to switch to a custom preset and use the Adobe I-Frame algorithm for preview. However I doubt that will work for the 3D material.
Eric
ADK

Issue with File Download(messageDownload) on Search Page.

Hi,
I created a custom OAF search page which fetches values from one table. The document in getting stored in my custom table in a BLOB colums and NOT in FND_LOBS.
The table has 3 collumns along with others:
1st is primary key (Record_Seq) ==> number data type
2nd to store actual file name (File1Name) ==> varcahar2 data type
3rd to store the actual uploaded data (File1Data) ==> BLOB data type
The reason for having the “File1Name” is so that I can display the original file name of the document that was uploaded, instead of just the “view” in the search page results .
On the File1Data BLOB and created a messageDownload for that under query results table with following details:
ID : File1Data
ItemStyle : messageDownload
FileMIME Type : pdf
Datatype : BLOB
View Instance : LacEmpExposureVO1
view Attribute : File1Name
File View Attribute : File1Data
When I click on the "File1Name" data hyperlink, it is opening only the first document corresponding to the first record in the search page results.
For example, If my search page returns 10 rows then when I click on the file1name on any row, It is open the first row file name only.
I have a primary key column(RECORD_SEQ) in the Table / EO / VO which is displayed in the search page results.
Also one weird thing is happening:
If I try to do this more than 2 times then it is opening the update page with the first record from the search page results…
I tried to print the context and it is nul the first time, But the second time then context is changing to "update". Dont know how this is happening????
Any advice is greatly appreciated as it is very crucial for me to get this resolved ASAP. I have looked at several forums and did a lot of things as advised in the forums . But nothing seems to work for me.
Thanks,
Mir
CO code for the search page
===========================
if (pageContext.getParameter("Create")!= null)
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of CREATE");
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureCreatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
else if ("update".equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of UPDATE");
System.out.println("LacEmpExposureCO ==> RecordSeq in PROCESS FORM REQUEST is: " + RecordSeq);
HashMap params = new HashMap(1);
params.put("RecordSeq", RecordSeq);
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureUpdatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO, // Do not display breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
else {
String strEvent = pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM);
System.out.println(strEvent);
System.out.println("Into the last ELSE part in LacEmpExposureCO.java");

Duplicate post -- Issue with File Download(messageDownload) on Search Page.

Is there an issue using file vault 2 on a Mac fusion drive

is there an issue using file vault 2 on a Mac fusion drive

I'm using that configuration and it works for me. There have been some reports of kernel panics with FileVault and SSD's. The cause is unknown. Chances are you'll be fine, but make good backups.

Issue with file to file in PI 7.3 (Splitting huge files)

Hi All,
Need your help in fixing the issue with file splitting
We are doing some sample scenarios(file to file) on PI 7.3 server.
We are trying to split a 10MB file by using the 'Advanced Mode' option in the sender file adapter. We gave max split file size as 2MB. The file got split into 5 chunks and was successfully sent to receiver file adapter. In receiver adapter we are able to see that. But in the target folder only 1 file was seen with size 2MB. All other chunks were missing. We need to have the whole data sent from source to target.
How to fix this issue? please provide your inputs.
Thanks and Regards,
Lakshmi Narayana

PI 7.3 has capable of processing larger size files.
Questions:
Have you picked EOIO quality of service? Hope you dont do mapping or content conversion for this file?
have you seen this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a06d79f3-d094-2e10-1a81-f4d802d0bcf1?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_nw73/helpdata/en/44/682BCD7F2A6D12E10000000A1553F6/frameset.htm

Issue with file name in receiver Communication channel

Hi Experts,
I am sending the files from SAP Application server to third party Application server.
In my source folder i have different types of files with different names.
but i need to pickup the files which is coming as of type sss_3300_was.txt and sss_3400_was.txt.
what would be the logic for this.what my understanding is if i put sss_* it will works.
If suppose the file is Exist in the folder as sss_3300_was.txt , so it will picked up and places in target folder.
and next time if the file type is sss_3400_was.txt then that will pick up and places in the target folder.
my question is, in the receiver comm channel what would be the file name scheme. i have tried with * and / but system has not been accepted as * can not be given.
Kindly suggest what should i put in Receiver CommChanne file name sheme.
Appreciate your inputs
Thanks,
Bhaskar

Hi Satish,
Thanks for your valuable inputs.
Actually i need to change the subjet when i am asking other question...
first thing is suppose i have 10 files like sss_3100_was, sss_3300_was, sss_3400_was........sss_3900_was in the sender application folder and should be moved to receiver [target] folder with the same name.
as you said mentioned above below is my undertsanding, please correct me if i am wrong.
In sender cc
1. i will give file name as sss_*
2. i will flag ASMA and also check file name.
In receiver cc
1. I will give file name as sss_*
2. i will flag ASMA and also check the file name
The above is my understanding with respect to your inputs, is it correct?
in receiver cc i have tried file name scheme as sss_* but when i see the receiver CC log its telling that * is not allowed.
may be i have not flaged ASMA at that time, but now i will flag ASMA in receiver CC dose it works? just need to confirm from you.
Regarding seconf issue.
when file is picking up from the source folder from SAP Application server as i can see file is picking up well and posting in third party folder and even in the sender cc and receiver cc logs i could see all shown in success.But when i see in the SXMB_MONI in the inbound interface the data are coming in the special charater format like @$??? and so on.But when i checked in SAP Appl server the same file contains the three lines of data like material number purchase order number and so on and it is Text file.
below mentioned are done configs for sender CC by me.
MP: file
TP: NFS [as it is SAP appl server]
filepath:/
file name: sss_*
file type :text
add time stamp
..... and so on
Kindly advise me if any changes are required and also provide me inputs in case any correction.
Thanks,
Bhaskar Reddy

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

OPM과 OM ISSUE 해결을 위해 LOG FILE을 생성 및 검색하는 방법

제품 : MFG_OM
작성날짜 : 2005-11-09
OPM과 OM ISSUE 해결을 위해 LOG FILE을 생성 및 검색하는 방법
===========================================================
PURPOSE
Customer에게 Oralce Processing Manufacturing(OPM)/Order Management(OM)
issue 해결을 위해 Log file을 생성하고 검색하는 방법을 알고 이를 고객에게
전달할 수 있다.
Explanation
OPM 고객이 Order process 중 fail이 발생 했을 경우,fails 된 Order process
에 따라 우리는 관련된 log file을 받기를 원한다.
예를 들면;
a) Order pad에 문제가 있다면 사용자는 Tools > Debug을 'On'으로 setting
함으로써 log file을 생성할 수 있다.
이는 Order pad 자체에서 행할수 있고 좀 더 자세한 사항은 아래의 step2 에
설명되어져 있다.
b) 만약 pick release가 fails 된다면 OPM support는 'pick release
generation' concurrent manager log file을 요구하게 된다.
좀 더 자세한 사항은 아래 step4 에 설명되어져 있다.
c) 만약 Transact process move order form(manual allocation screen)의
allocation 작업이나 pick confirm이 fails 이라면 support는 생성되는
OPMLOG***를 받기를 원할 것이다.
좀 더 자세한 사항은 아래 step5 에 설명되어져 있다.
d) 만약 Order Management/Inventory Interface가 fail 이라면 support는
'Interface Trip Stop' concurrent 실행중에 생성된 log file을 받기를 원할
것이다. 자세한 사항은 step5 에 설명되어져 있다.
OM/OPM issues를 위한 Log files의 생성 및 검색 방법
1. utl_file_dir parameter 값을 얻기 위해 아래의 sql을 실행한다.
select value
from v$parameter
where name like 'utl_file_dir';
2. OM: Debug Directory profile option 값으로 step1의 결과값이 setting
되어져 있는지 확인한다.
3. Order pad에서 log file 생성:
1) OM: Debug level profile을 '5'로 setting
2) Order pad에서 Tools > Debug를 ON, lof file name을 적어 놓는다.
3) Issue를 재현하고 step1 결과로 나온 경로에서 log file을 검색한다.
4. Pick release concurrent log file을 생성하기 위해서는 profile option
OM: Debug level을 '5' setting 후 pick release를 concurrent manager
mode로 수행한다.
Application의 view requests 화면에서 log file을 검색할 수 있다.
5. Transact move order form에서 'manual allocation' 진행시의 log file을
생성하기 위해서 아래의 steps을 따른다.
1) Step2에서 지정한 경로에서 'OPMLOG****' file을 remove 한다.
2) Manual allocation을 수행한다.
3) 'OPMLOG***' log file이 생성될 것이며, '****'는 session id 값이다.
Session id 값은 application 화면의 Help > Tools > Examine의
$Profiles/db_session_id 위에서 찾을 수 있다.
4) Pick confirm에 관련된 log는 2)번 step을 제외하고, pick confirm을
수행하여 생성할 수 있다.
6. Interface Trip Stop(ITS)가 실행되는 중의 log file을 생성하기 위해서는
OM: Debug level profile option 값을 Interface Trip Stop을 실행하기
전에 '5'로 setting 한다.
Interface Trip Stop을 실행하기전에 'Defer' checkbox가 uncheck 되어
있는지 확인해야 하며, 이 log file은 Application의 view requests 화면
에서 검색할 수 있다.
Reference Documents
Note 290069.1

Issue opening files.

Hi,
I've recently been having issues opening files from clients where I get a message telling me the file was created in a newer version of Adobe - this has occurred with both my InDesign CS6 and Illustrator CS6. I have made sure the software is updated but the issue keeps coming up, can anybody offer any advice?

Probably created in Adobe Creative Cloud.
You can get a trial of Creative Cloud that will last 30 days - and see if you can open the files from there.
It's always best to work on the same version of InDesign as the file was created in.

ESYU: Autocreate issue를 위한 Debug file 생성 방법

Purpose
Oracle Purchasing - Version: 11.5.8 ~
PO Autocreate issue 발생시 문제 해결을 위해 Debug file을 생성하는 방법에
대한 설명을 목적으로 한다.
Solution
Autocreate debug utility는 11i_PRC_PF.H (patch 2320032) version 즉 11.5.8
version 부터 가용하다.
System Administrator로 log-in 후 specific user(autocreate 생성자) level로
아래 profile options 값을 setting 한다.
-. Set the FND Debug Log Enabled: Yes
-. Set the FND Debug Log Level: Statement
-. Set the FND Debug Log Module: PO
Oracle Application을 log-out 후 위 profile option 값을 setting 한 user로 log-in을
다시 한다.
Autocreate를 통해 PO를 생성합니다. PO가 정상적으로 생성되거나 failed 될 것이다.
Log file을 monitor 하는 방법:
As System Administrator Go to Help-> Dignostics-> Logging -> View
Search System Logs page가 pop up 될 것이다.
특정 parameter나 아래 모든 parameters에 값을 입력 후 log를 view 할 수 있다.
Level: Statement(optional)
View : %PO_INTERFACE_S% ( For Autocreate)
Posted After and Posted Before: Log를 보고자 원하는 date
press GO
다음 Module name을 가진 logs를 조회:
%PO_INTERFACE_S%
Download All을 이용하면 log file을 excel file로 export 할 수있다.
Delete All을 이용하여 log statements는 remove 된다.
Reference
Note 220747.1

MPEG1 muxed files

I have music files that are MPEG1 muxed files, but I don't know how to separate the video and audio.
I have Windows XP, so FFmpeg and BBDemux wont work.
I've tried using some softwares such as DGIndex and Videora, but still wont work.
What should i do?

if your trying to convert videos then the video format only supprted by the ipod is .mov or .mp4 no other format is supported by the ipod. To convert the video successfuully the best results for windows users hasbenn using videora.
Remember:
this software is not supported by apple so with any support or questions you have go to their support forums for help not here. All the links are below and this is a good solution for windows users.
http://www.videora.com/en-us/Converter/iPod/
http://www.videora.com/en-us/Converter/guides.html
http://www.pspvideo9.com/forums/index.php?c=8
GFF

Mpeg 1 Muxed files

I understand that when you import "muxed files", (I have no idea what that means) you only get the video, no audio. I have some Quicktime movies like this. Is there a way I can change the format of the file so I get the audio too?

MPEG Streamclip (free) can export muxed files to QuickTime formats and include the audio.

X2-02 camera issues - .nrw files not converting to...

I've got X2-02 and am experiencing the same problem on this link: http://discussions.nokia.com/t5/Cseries/C2-02-camera-issues-nrw-files-not-converting-to-jpeg-files/m...
I tried all of the tricks mentioned and nothing became fruitful in converting the files to jpeg (viewable on PC).
Anyone who has a solution to this, kindly post it here...!
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

imranshahab,
Welcome to Nokia Discussions!
Try this online image convertion site: http://bit.ly/1dyiDQm
Or try sending the .nrw files to another bluetooth capable phone and see if it does convert the file to jpeg after receiving it.
Good luck

Exporting Muxed Files in Quicktime Pro 7 w/ MPEG-2 Component

I have .mpg files I need to be able to get into iDVD. They are MPG-2 muxed files. I have quicktime pro and the mpeg-2 component. I can't for the life of me figure out how to do this. Everyway I try either fails halfway through or I get no audio. I've trying to convert them to Mpeg-4. The answer is probably easy but I am new to Mac. any help would be great.
thanks

As you have discovered, QT does not support the export of sound from muxed mpeg files. Fortunately, this freeware will export to several formats. It also allows you to do some editing of mpegs without re-encoding if that is desired: Mpeg StreamClip

MPEG1 Muxed file conversion

Hello!
Can anybody recomend what I should be converting MPEG1 Muxed files (from a Sony DSC-W30 camera) to to use with imovie? I have been making MPEG-4 on Streamclip and it seems to work well. Just wondering if there is something quicker/better/faster I should be using/doing? Thanks in advance for any help!!

OK, I bucked up and purchased MPEG-2 Component. Now I get this message when I try to drag the MP4 file into my iMovie 6:
While I consider the MPEG-2 Playback component a good investment for a number of reasons, they have nothing to do with the playback or import of MP4 content. The MP4 file container is associated with MPEG4/AAC and H.264/AAC files -- neither of which require the MPEG-2 component which is for use with MPEG-2 (MPEG, M2V, VOB, etc.) compressed files.
"The file could not be imported: The file can't be imported; QT couldn't parse it: -2048"... What does this mean?
Error code -2048 (NoMovieFound) is normally associated with a corrupted file or improperly terminated file. For instance, prematurely closing a file while it is being written (i.e., power outage, "brown out", forced closing of the application, etc.) may prevent the writing of a valid end to the file. In addition, some applications (like Windows) write "open-ended" files which QT applications consider invalid. (Files indiscriminately downloaded from the Internet frequently have this problem.) In any case, without a valid termination or known "end of the data" a movie file will not be recognized valid and usually return a -2048 error or some sort of "Not a Movie" message.

Mpeg2 issue ---- muxed files

Similar Messages

Maybe you are looking for