MPEG4 Video playback is jumping and generally poor

Hey all,
I've got a couple videos that are already converted to MPEG4 (.mp4) that play absolutely fine in quicktime 7.1.3 but when i try to play them in itunes i get jumpy sketchy playback, it's unbearable to watch!
The problem definately isn't hardware as i run a G4 1.67ghz machine with 2GB of RAM. I've got nothing else open and besides as I said it runs fine in quicktime.
Does anyone know any tricks to get around this?
15 Powerbook G4 1.67 Superdrive 2GB 128MB   Mac OS X (10.4.8)  

Followup:
If i convert to H.264 using convert for ipod in iTunes i can play the files no problem but that shouldn't be necessary as mp4 is supposed to be supported.
It would litteraly take years to convert all the stuff i have over to H.264, really keen to mp4 working in itunes.

Similar Messages

  • Poor video playback from movies and DVD in Quicktime and DVD player

    Hello.
    I have just taken delivery of a smashing Intel iMac C2D 20".
    I appear to be having problems playing back video and DVD. let me explain:
    When entering full screen on a DVD, the picture is very blocky (pixilated). This happens on all DVD discs I have used.
    The same happens if I playback a MPEG or AVI, and also when I use Eye TV to playback TV.
    I have run the Apple Hardware test, and it returned no faults.
    The Video Card is the ATI Radeon X1600 with 256mb
    I am sure that there is a problem because I have just compared playback using my old G5 iMac and G4 Powerbook using the same media files and DVD's and they playback fine.
    Does anyone have any suggestions (other than calling Tech Support at this stage as I will blow a fuse after being on the phone for 1.5 hours getting nowhere, and with agents not knowing which keypresses to initiate stuff - sorry - Rant over - I just want to get this resolved)
    As a side note: I have just installed Windoze XP on a partition, and the playback of DVD and MPEGS are fine - so it leads me to think maybe its software??
    Not one to let things get the better of me - I installed Real Player and VLC.
    BOTH of these play back the media correctly.
    So I guess it is Software for sure, and I guess its Quicktime. Does Quicktime run DVD Player as well?
    I did a roll back to a previous version of Quicktime, and it screwed up the mac. It would book, but would not load the Finder.
    So I archived and reinstalled, and I had 7.1.2 QT, and the problem was still there. So up again to 7.1.3 and problem still persists.
    I have come to the conclusion that this is to do with Quicktime on a C2D processor iMac.
    Can anyone shed any light on this or suggest a solution?
    Manythanks
    Glenn

    10.4.8 Combo update resolved issue

  • Video glitchy pauses jumps and stutters

    Hi there
    I seem to be having prolems with video playback on my MBP.
    Often on You Tube for example after the video is fully downloaded on playback the video sporadically pauses or jumps forward or behaves generally glitchy. I do not believe it to be the internet connection. I have experienced some problems with downloaded files. I am fully updated as well.
    Does anyone have any suggestions please for things to look at or tests to run?
    Video is not my forte... :P
    Thanks very much
    A

    Fixed. There was 5 sec video clip that plays before the main video in the track. However, the 5 sec clip was video only, not audio, and was as a .mov as opposed to mpeg2. Anyways I encoded the 5sec clip in mpeg2/AAC and added it before the main clips and everything works. Still don't know WHY it happened and why it stuttered, any ideas? Don't think it was the lack of black at the start as i didn't add any.

  • Corrupt video playback in Kodi and black screen when emulating.

    Hi!
    I have a problem most likely related to each other. When I try to play back videos in Kodi the video just gets scrambled, it fast forwards very fast and looks generally corrupted and when I try to start a game in some emulator (for example mupen64plus) the screen just turns black.
    Kodi seems to work really well otherwise, it got sounds in the menus and the menus are smooth when navigating. Same with emulators, the GUI (mupen64plus doesn't have one) works well and I can navigate the menus and everything but as soon as I start a game the screen turns black with no sound.
    I tried OpenELEC (which is a distribution that has the main purpose of running Kodi) and the video playback works just fine. Sadly it's not very emulator friendly.
    The packages I have installed are: "xf86-video-ati" (dependence: "mesa"), "xorg-server" (dependence: "mesa-libgl") and "xorg-xinit".
    And the way that I the programs are usually from .xinitrc (example: exec kodi-standalone) and then xinit.
    Hardware:
    Motherboard: ASRock FM2A78M-ITX+ mITX
    APU: AMD A10-7800 (the GPU part is GCN 1.1 aka Sea Islands)
    All connected through HDMI
    Any help would really be appreciated!
    Last edited by guran33 (2015-02-12 22:48:05)

    If you use windows (havent checked on mac but it might work)
    Disable Direct3D acceleration in the player you are using.
    If you use VLC media player, Go to preferences, Video, And under output, change from default to "Direct 2D video output"
    If you use Quicktime, Downgrade to Quicktime 7.6 or upgrade to quicktime 7.7.3 and Go to
    Edit --> Preferences -->Quicktime preferences.
    Under that, go to advanced tab, and uncheck "Enable Direct3d acceleration" (3'rd box)
    Fixed the problem for me
    You're welcome

  • Video playback is choppy and lags

    when i play videos off youtube, many times it is choppy and very laggy.  could there be a setting to improve video playback, or is it likely my wifi /internet is too slow?  although no problem on mac book, or imac??

    Have you tried when conected to another network? Your performance is typical of a network problem.

  • Re: Satelite M70 - Video playback really slow and dtrange metalic noise

    Hi
    I have a Satelite M70 laptop and a few days now I realise that the video (youtube and any sort of videos) playback speed is really slow, slow motion (my interenet speed is fine)
    and there is a really creepy kind metal noise when the video is playing.... u cant hear anything just that noise.
    Also when i open a file or a menu in windows u get theis king of metalic noise
    I have checked the video and audio codecs and are the latest
    btw: I can hear audio files from media player just fine. It seems this happens only with videos
    Any suggestions cause i cant see any videos!!!!!

    I was 100% sure you will post this.
    Online playback speed is always different. I have fastest 16000 DSL line and I have noticed the same on my M70 and brand new Satellite P300. Sometimes is youtube or some livestream video perfect and sometimes audio and video don't match together or the video playback is like in slow-motion.
    I have also latest drivers and codecs preinstalled on both machines. There is one interesting thing-this slow-motion happen when the HDD led is blinking and when the HDD is running. Please play a little bit with this stuff and watch carefully how it works.
    About sound and speakers is not easy to say if they are defective or not. The fact is that sound on headphones works perfectly is evidence that sound card or sound driver is not the problem.
    I really don't know what to say but I believe the speakers don't work properly.
    What do you think?

  • Need help fixing video playback on iTunes and worried it will affect iphone

    First of all, the black levels when playing videos on iTunes looked terrible.
    I looked all over on how to fix this..
    So then I installed the lastest nvidia graphics drivers to help with video playback
    After install my videos black level was definatly better, I think.
    But now all videos play wierdly in the corner of the itunes program..
    http://img36.imageshack.us/img36/8170/ituneshelp.png
    I need help to fix this and I hope this dont affect playback on iphone 4

    If exporting to i4 results in the same, there could be a problem with the movie itself. Try exporting to the i4 and replay the video. However if exporting to i4 plays okay on the phone, it's your Nvidia drivers. You can download the prior Nvidia drivers and downgrade.
    There have been dozens of cases where Nvidia drivers even the newest ones have made a mess of games, movie playbacks, even viewing Windows programs.

  • Itunes video playback started  crashing and no longer able to view on apple tv ideas?

    hi
    since yesterday after everything working ok all videos played fine
    Itunes has started crashing on my pc ( windows 7 ) when playing some videos
    I have deleted and re installed itunes no help
    and apple tv no longer able to share videos from itunes
    message about check network, check itunes update etec
    any help for a dummy appreciated

    av cable can be various formats
    and you mean hdmi and the tv you connect to dont support hdcp that could cause it
    otherwise the cable itself could be damaged
    just finished messing around with connecting my iphone4 to a projector and that works just fine

  • Screen tearing on video playback with mplayer and radeon driver

    I use a old Radeon 9200 video card with the open source radeon driver, and after I configured the radeon driver to fix the screen tearing, it still has screen tearing
    this is the xorg.conf:
    Section "Device"
    Identifier "My Graphics Card"
    Driver "radeon"
    Option "DRI" "on"
    Option "DynamicPM" "on"
    Option "ClockGating" "on"
    Option "AccelMethod" "EXA"
    Option "EXAVSync" "on"
    Option "DMAForXv" "on"
    Option "ScalerWidth" "2048"
    Option "EnablePageFlip" "on"
    Option "RenderAccel" "on"
    Option "AccelDFS" "on"
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AGPFastWrite" "yes"
    BusID "PCI:1:0:0"
    EndSection
    and this is the ~/.mplayer/conf:
    vo=xv
    ao=alsa
    mixer-channel=Master
    nolirc=yes
    nojoystick=yes
    font=Arial
    subcp=latin2
    subpos=95
    and I know that this video card is capable of playback without screen tearing, because if I boot windows xp and open any video file with VLC, there is no screen tearing
    Last edited by Chrys349 (2011-10-31 03:03:06)

    I have a Radeon 9250. Here is my setup:
    Section "Device"
    Identifier "Radeon 9250"
    Driver "radeon"
    Option "EXAVSync" "false"
    Option "ColorTiling" "true"
    Option "EXAPixmaps" "true"
    Option "MigrationHeuristic" "greedy"
    Option "SwapBuffersWait" "true"
    Option "TripleBuffer" "true"
    Option "EnablePageFlip" "true"
    Option "AGPMode" "8"
    Option "AGPFastWrite" "false"
    Option "BusType" "AGP"
    Option "DisplayPriority" "AUTO"
    Option "IgnoreEDID" "false"
    Option "RenderAccel" "true"
    Option "AccelMethod" "EXA"
    Option "AccelDFS" "true"
    Option "FBTexPercent" "0"
    Option "DMSForXv" "true"
    Option "SubPixelOrder" "NONE"
    Option "VGAAccess" "false"
    Option "DRI" "true"
    Option "XV_VSYNC" "true"
    Option "XV_CRTC" "auto"
    Option "XV_BICUBIC" "false"
    EndSection
    I'm glad with the video quality, however, I do experience little tearing sometimes, especially in the scenes involving panning.
    The XV_VSYNC option is supposed to eliminate tearing (due to the radeon manual), but it is ignored if KMS is enabled. Try disabling KMS if you don't mind some performance reduction. The Radeon driver generally has some annoying bugs and glitches in KMS mode.

  • Video Playback in iTunes (and Quicktime) All White

    Since I updated iTunes and Quicktime, playback of all videos in them is now white, with a few dots of colour and just audio playing through.
    Is there a solution to this yet?
    Thanks - Dan.

    The iTunes store writes, "All TV shows and other video content are now available in 640-by-480 resolution." And, QuickTime Tech Specs page, says the following.
    For viewing videos purchased from the iTunes Store:
    (Windows)
    2.0 GHz Pentium-class processor or better
    512MB of RAM
    32MB video RAM
    QuickTime 7.1.3
    Windows 2000 or XP
    For viewing 640x480 standard definition (SD) H.264 video:
    (Windows)
    2.0 GHz Intel Pentium class or better processor
    At least 512MB of RAM
    64MB or greater video card
    Windows 2000 or XP
    I don't know how much VRAM you have on your terminal, but it looks like you need a faster machine as far as CPU is concerned.
    Good luck
    MacHouse
    180 video tutorials for Mac users

  • Video Playback on itunes and ipod

    Hi,
    I have an anoying problem.I bought Muse HAARP DVD version from itunes store which is a video of there concert at wembley,but when i playback on my ipod it dosent play in the correct order although they appear in the correct order in itunes.
    Also at the end of a track the video and audio fades out to black then fades into another track in the wrong sequence.This is downloaded from itunes store so i would have guessed it should play in the correct order but it dosent.(I dont have shuffle on by the way)
    Hope someone can help as im feeling a bit ripped off here.I wish id have bought the CD/DVD instead.

    Any ideas?

  • [SOLVED]suddenly video playback in youtube(and similar sites) playing

    in fast mode, and with no sound at all.
    i didn't change anything as far as i know, in my system, except from updating it from time to time(my system is up to date).
    the problem occurres in firefox and chrome.
    there is no problem with the sound and video, if i play a video in vlc(it plays well).
    i tried to restart the computer, and the problem still exist.
    i don't know what to do.
    Last edited by andav (2015-03-16 20:55:20)

    problem solved.
    i went to settings -> sound (in gnome).
    the output was changed to something else(don't know why), so i changed it to: line out - built-in audio, and now everything working :-)
    Last edited by andav (2015-03-16 20:55:51)

  • Video playback for Amazon and Netflix are too dark to see. Running OSX 10.10.2

    When playing these streaming videos, the pictures are too dark to see much of anything. YouTube and Facebook videos are nice and bright. I tried "never activate" the plugins, but that made no difference.

    Hi rdocter,
    First please check to make sure your drivers are up to date: [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Also please provide a link where this might be happening.
    Thank you!

  • Unfair service improvement charge and general poor...

    Hi My issues started when we moved house in October 2013. 3 weeks in advance I filled in the online forms to request a home move with my phone number (we were only moving a short distance) and broadband to be working by the date we moved in. I received an email confirmation saying Good News your order has been confirmed and all your services will be working on 18th October – moving in day. Moving day comes and the phone line is working – sorry oh no its not – it’s the previous occupants phone line that’s working. I ring BT from my mobile and ask them what is going on? They promised services will be working by that evening, actually what they did do by that evening was turn everything off. Nothing worked then for the next 2 weeks we had nothing but stress and hassle calling BT and speaking to their contact centres in India who repeatedly lied to us and told us every day it would be working by midnight. We were very cross as it was an issue we didn’t need moving house with two small children. At one point they organised an engineer to call to sort something out to do with the phone line which was still going to the exchange at the top of our old street. This is what the engineer told us. After his visit we still had to wait several more days before our phone number was transferred over and then several more for broadband. At no point did we ever agree to pay for an engineer visit. Yesterday 10/02/14 I receive my bill and they say they are putting my DD up to £110 per month to cover a visit called a service improvement visit! I am not happy to pay this charge after all the problems they caused us during our move and want to leave BT but they want over £200 to get out of contract. To speak to someone who actually sounds if they value you, you have to get really angry. I am now waiting for the resolution team but not holding my breath. Has anyone been through this? Sky in contrast was amazing when we moved – came out fixed the dish when they said they would and didn’t charge us, and have subsequently been back to replace the box free of charge. Really upset I want to cancel my DD but don't want to get my self in a mess.

    Hi Krismuzg,
    I can take a look at the details of your complaint. Please send me in your details using the "Contact the Mods" link found in my profile.
    Thanks
    PaddyB
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Video playback slow and audio drop out after render

    Hi
    I have downloaded a trial version of After Effects from the cc,
    Problem is everytime I render ou,t the video playback is slow and the audio drops out
    This happens with AVI or Quicktime files.
    Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
    Render/export in Premire pro is fine.
    Can any one help.
    Regards Phil Green
    Blue Room Media.

    It sounds like you might be hitting the space bar in hopes of getting real time playback.  Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
    And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively".  You can frustrate yourself in a hurry.
    But this can really help;
    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

Maybe you are looking for

  • Identifying and managing clients in nonblocking NIO socket programming

    Here's my beef. When I write a Server using a thread for every new connection that comes in, I can remember everything for each client in its respective thread. I can have a table entry in a MYSQL database for each client which each thread can look u

  • Hello... i cant bwoser blospot on my browser .blogspot site not appearing on my broswer plz help

    recent i added an custom domain on my blogspot site as www.allfreeebooks.net but on my browser this site not showing as direct url . loading loading then spot that page . i can access my blogspot account , can post too . but when i try to see my page

  • Printer settings not retained in preferences

    Hey Everyone I need a little help. An error occurs everytime I try to select my Canon MP460 from the printer Preferences menu in the System Preferences window. I click the add button, it shows up with the driver and location filled in the pull down m

  • Integration Service will not start

    When I try to start the SAP Business One Integration Service will not start. Windows says it could not start the service... see the System Event log...if this is a non-Windows service, contact the service vendor. This is what the System Event error i

  • Insert actual date and time

    Hi forum, I want to know if it is possible to insert for example like a field more but hidden the actual date and time, like in abap we use sy-datum... The attribute visible of a inputfield: visible  Use this attribute to determine whether the input