Mpg 4 in cover flow/column view major design flaws

before leopard tiger had the ability to play in column view different parts of the song. you could navigate with the mouse to start it again from the beginning.
you cant do this in leopard . unless im a jerk this is one of the most rediculous flaws or omissions. i have to click on the arrow but it doesnt start at the beginning once clicked. this is horrible!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
you need the old system back. and there is no whay to play songs in coverflow
so what is going on here????????????????????

mine starts at the beginning too
but once its started and you stop it
it will not return to the beginning without that slider
where is apple man at????????????????????????

Similar Messages

Why do my image previews in cover flow folder view option look terrible?

Recently upgraded to OSX 10.6 Snow Leopard and have noticed that image previews look terrible in the cover flow folder view option - work with image files numbering in the thousands and really need this option to work - dosen't seem to matter how long I give the machine to process the preview and can find no consistency in the file type or format the machine seems to have trouble with

~/Library/Caches. Quit all applications then delete this folder. If a normal delete doesn't work, do a secure delete (Finder > Secure empty trash {this will take longer})

Cover Flow & Landscape View On Photo and Camara not working

Cover Flow & Landscape View On Photo and Camara not working.
Reset the iPhone. Made iTunes lib manual. Still does not work.
Help.

do you have the portrait lock on?
double click the home button to bring up the mutitask bar. slide it to the left and there is a portrait lock and ipod controls. Make sure it is not locked. If this is not it i would try a hard reboot.

MAJOR DESIGN FLAW?: ---- IPAD in car connected to 12V outlet

i have my usb power cord plugged into a device which converts the 12V to usb power.
When I do this the IPAD works fine except for audio output. There is a loud buzzing on the audio.
When I play audio and it is not hooked up to car usb, no buzzng.
Since very cheap electronics can use car power to produce clean sound, why does not the $800+ 64GB 3G do it?
Seems like a major design flaw if I cannot plug it into the car and listen to music during long trips.

One way to suppress engine noise/digital hash - which is very common and getting worse in cars as more computers, upwards of 100 in some cars as well a multiple networks connecting them in - is to place a ferrite choke on the cable powering the device. Some USB cable have them built in. They look like a cylinder perhaps 2 inches long and 3/4 inch in diameter molded onto the cable.
They can also be externally used which is probably the only way with the USB to iPad connector cable.
Radio Shack has them see [*this link*|http://www.radioshack.com/product/index.jsp?productId=3012599] for example. Their web site says they are available in most stores.

Cover flow column widths

Hi everyone,
Is there any way in which I can set the widths of the columns in the finder window when I am using Cover Flow?
When I open up a new window, the column width for the first column is huge:
So I often resize it manually to a more reasonable size:
The thing is, it always opens up with the huge first column. Is there any way I can make them stay the same size with all new windows?
I have been through the finder options but can't find the answer there. I have also used the "Use as defaults" button in the finder options, but it doesn't stick the column widths.
Anyone got any ideas?

mine starts at the beginning too
but once its started and you stop it
it will not return to the beginning without that slider
where is apple man at????????????????????????

Finder Cover Flow initial view

How can I set the initial view settings when using cover flow within finder-
the finder file/folder list at the bottom of the window is way too short and the cover flow file preview portion of the window is massive.
Appreciate?

For me, I find that when I resize the window, it stays that way. If it doesn't stick for you, try resizing, and then pressing Command-J to open View Preferences, check the Always Open in Cover View box at the top, and the Use as Defaults at the bottom. They're not directly related, but I've found that the helped.
If those don't help, go to the folder ~/Library/Preferences (where ~ stands for you Home folder), and remove a couple of files:
com.apple.finder.plist
com.apple.systemuiserver.plist
In the ByHost folder, there will be one or more com.apple.HIToolbox.randomjunkthatdoesn'tmatter.plist file; remove all of them.
Log in/out, and see if that helps.

Low-rez or no thumbnails in Cover Flow & Icon views!

Cover Flow used to display sharp and clear high-resolution jpeg previews, but now it display either low-rez previews for most or nothing at all for some. In Icon view, the Finder used to be able to generate thumbnails for jpeg files that don't have icons, but now many jpeg files are just blank in Icon view.
Does this have anything to do with the newer updates?

This problem hit me suddenly about two days ago. Can't seem to fix it. Haven't tried rebuilding Spotlight index yet, trying to avoid it, but that might solve the issue. Perhaps before I leave for the day that's what I'll do, and see how things are in the morning.
FYI, others have this issue as well:
http://discussions.apple.com/thread.jspa?messageID=6677811
http://discussions.apple.com/thread.jspa?messageID=7144284
I'm sure there are more around...

Firmware 1.0.2 released - fixes Cover Flow album view

Hi folks,
Didn't see this posted yet - just synced my 3G nano and firmware 1.0.2 was available.
Cover Flow is now showing albums exactly as the default album view in iTunes. Hooray!
-Nikhil

The only thing which is now better in coverflow is, that compilations are now hidden, but coverflow still lists up the artists in alphabetical order, not the albums ! Why?
Apple, it can't be so difficult to let coverflow list up albums, _not artists_, in alphabetical order.
Compilations are now listed just once (as they should be), but there's always listed the first artists name of a compilation, instead of "various artists". Of course you can set in every single compilation the first tracks "sorting name" as "various artists", but it can't be so difficult for apple to make that as default, as it works in iTunes.
Please don't notice my terrible english. I'm a little bit upset >:-(
Chris

Art shows in itunes cover flow & album view but not on ipod

I spent several hours downloading cover art to itunes for albums where the art couldn't be automatically retrieved by itunes. I'd browse through album view, and for every album that had no art, I'd (a) select the album by clicking on the default music-note image and thus activate the drag-and-drop target in the lower left, and (b) drag some art from a website. When I was done with this, all the albums for which I downloaded art would properly show art in the itunes cover flow and in album view mode.
For the iPod (a 160GB Classic), I deselected "display album art on your ipod", hit "apply" to have it delete the art, then reselected and applied again, and itunes went through the process of formating and downloading the art to the ipod.
Now, however, the iPod still only shows the artwork that had been automatically retrieved; all the art I had added manually won't show. Back in itunes, I notice that it looks like my process for downloading the art only resulted in the art being applied to one song per album, as far as I can tell randomly selected. If, in album view, I select each song individually, the art will show in the lower left corner (and in "get info") only for one of the songs; on one album it might be track 1 while on another it might be track 7. However this is enough for itunes to show the art for the whole album, and also to show the art in cover flow.
Is there any automatic way to synchronize the art over a whole album, or at least to get it to download to the ipod so that it shows in cover flow and album view on the device as well as on the computer? I had to download art for about 190 albums; it would be a real drag to have to do that again.

Ok, here is the method I used. Another member gave this to me. It has worked for my iTunes library, and hopefully my ipod on the next sync.
I opened iTunes and Safari, with Safari on Amazon.com (to get the art). I would play any song from an album and command-click the each song in the album. Once each song is highlighted, I hit command-I to change info. I then dragged the art from Safari to the small box on the right of the smaller info change screen. This resulted in every song highlighted displaying the same artwork.
I hope this helps.

IPhone work switch to Cover Flow, portrait view when turned on its side!

Hi
I have only had my phone for a week and its seems to have just stopped switching to Cover Flow or portrait view in Safari or when looking at photos when its turn on its side.. but everything else appears to work fine...
I've restarted, refreshed, recharged, reinstalled the software from scratch and its still the same...
Any ideas?

That's the weird thing. In all the apps I have the accelerometer appears to rejoster the motion correcty.
I have an app with a small ball that moveswhen you tilt or rotate the iPhone and this clearly register the rotation perfectly. So I can only assume the accerometer is working fine.
But when I go to Safari and rotate the iPhone on it's side it doesn't rotate the browser as it should.
When I go into iTunes and again rotate the iPhone it doesn't change to cover flow.
And again when looking at pictures it doesn't rotate the image.
The annoying thing is that it all used to work and only just seems to have stopped, yet nothing has happened to have caused this.

Cover Flow (Album view) font is bitmapped and choppy

I've scoured this the discussion threads and haven't seen anything on this issue with v7.0. My font is very jagged and bitmapped looking. Does anybody have any ideas what happened or how I can fix this?
Here is a screenshot of what it looks like: http://www.ducklow.com/images/itunesissue.jpg
Dell Latitude C640 Windows XP Pro P4, 2.0Ghz, 1Gb RAM, 60Gb HD

I currently have the same problem. I did, at one point fix it, however, i have no idea what i did so can't get it back.
What i was doing when i fixed it. I was changing all the video settings on my computer because i could not get cover flow to work. This occurred somewhere between itunes 7.0.0 to 7.0.2 I am not sure if it was a version, but i think it was 7.0.0. But Basically i think i changed settings in the right order, resulting in fixing the problem. Which of course i messed it up trying to get video to play back right.

Content Server News Portlet major design flaw ?!

I ran into a Content Server 6.1 issue which is really frustrating me. I am wondering if I am doing something wrong or if it is a design flaw: 1. I created a content server news portlet "out of the box" and added it to my MyPage.2. I created and published 2 news articles.3. I edited the 1st article and just saved it. I did NOT PUBLISH it.4. I edited the 2nd article and PUBLISHED it. The news index is re-published automatically to reflect the changes of the 2nd article which has been published. But the index now displays the changes of BOTH articles, even the unpublished! Furthermore the 1st article can't be opened from the index anymore if the name property has been changed. As the published file name changes with each version and especially when the name is updated, the news index links to the new published file name - but it has never been created as I didn't publish the 1st article! I understand why this is happening: The index content item holds a list of all article content items and is published whenever an article is published / deleted / expired. But until now I thought that content server is holding the last published version and includes this into the list until a new version is published. That's not the case! Imagine this on a production environment with workflow activated: one article was approved and published while the other still needs to be reviewed, but it's (unreviewed) index data like headline etc. is already displayed in the index?! And in worst case the article can't even be opened. You just get the server error "page not found". Many of my content items for a current big project follow the idea of the news template, e.g. HR Staff Overview (persons = articles, overview = index), so I am kind of stressed by what I found out. Has anybody made similar a experience and found a workaround for this? Perhaps one of the support people could explain how the news portlet is intended to be used with this severe behaviour? Am I expecting too much? Is updating an already published article not possible? But why are version mechanisms included for content items then? I appreciate your comments. Thanks.

Thanks for the quick reply.
We are using Content Server 6.1 with all Hotfixes installed and we are not planning to upgrade to G6 at the moment.
As far as I understood the 'filtered.published' property contains the date the content item was published the last time. So it will always be 'true' if the item has been published in the past, no matter if it's currently published or not.
The index template with the code snippet you sent will display the currently not published (but changed) item properties whenever another item was published. Have you changed the design in 6.2 so that properties of an item in a list property of another item are just copied and not linked?
As a workaround I now compare the 'modified' property with the 'published' property and if it is greater or equal I don't display it in the index. But that's not the way Content Server was designed to behave, is it? With this solution I can suppress the item in the list if it has been modified after the last publishing, but of course I rather want to have the data of the last published version.
Isn't that possible? Is it possible in 6.2? Is there any way to update Content Server to 6.2 without acquiring G6?
RegardsStefan

Problem with the List/Album List/Cover Flow/Grid view buttons

Is anyone else having this problem?
I have each playlist/media in different views. I have my music in List view, my podcasts, TV shows, and certain playlists in Album List view, and my movies and music videos in grid view. But now, any view that I select makes it the same for each playlist/media and I have to manually change it everytime I go to one of those lists. I figure this is a glitch with 10.5.3. Anyone else experiencing this?

I'm also having that problem.
It seemed to happen after iTunes 10.5 updates.
I like my music in album list view and my apps in grid form. However, now it's just one view for all lists. Any fixes for this or is this a bug that needs to be ironed out by Apple?

Problem with Cover Flow full screen view in 10.6

I like to use the Cover Flow full screen view in iTunes on my monitor. Since upgrading to iTunes 10.6 Cover Flow full screen view will revert to Cover Flow standard view between each song. This did not occur with any previous version of iTunes. Is there a setting that will prevent Cover Flow automatically switching back to standard view from full screen view?

I guess I am the only one experiencing this issue of Cover Flow full screen view collapsing to standard view when a song within an album or playlist changes. This began in 10.6 and has continued in 10.6.1. At least I have not experienced the more serious issues others have with 10.6.

Cover Flow: Can I Change Video Clips' First Frame?

Hi,
I've got a bunch of video files that I'm viewing in cover flow. However, seeing their first frames doesn't help much in giving me a clue about their contents.
Is it possible to select an middle frame in the video clip and have that be the image that pops up in cover flow? How?
Thanks,
Duck

Whenever I get a movie I always play it in QT Pro 7, select a typical frame, copy it and then paste it as the icon for the movie using GetInfo. Cover Flow respects these added icons, and that is what it displays.
If you only have QT X the process is a bit more problematic, since I have not discovered a way to select and copy an individual frame. You can't even do a decent screen shot, since if you pause the movie to take a picture of the movie, the idiotic control bar is inside the movie frame. However, if you pause it, then move the mouse off the control bar and click once inside the frame, the control bar will disappear and you can then do a clean screenshot. Open the screenshot in Preview, select all and copy, then select the movie file in Finder, GetInfo, select the wee little icon at the top and paste. Your movie will now have your custom icon displayed in Cover Flow, Icon view, and so on.
Francine
Francine
Schwieder

Mpg 4 in cover flow/column view major design flaws

Similar Messages

Maybe you are looking for