Mpg and mov wont work

my computer is set up to play mpg and mov with quicktime but wont, just says done with errors on the bottom of screen. i tried the troubleshooting and it shows the lil picture and clip but still doesnt work.

I will tell you how to do it but first promise that you will run Disk Repair (single user mode, install disk, or shift key held down at boot) and then repair permissions before trying to reinstall the packages.
Also, download the combo installer for 10.3.9 and run it again.
If none of the above works then you can go to Library/receipts/and the version of itunes and Quicktime that you want to install.
Drag them to the desktop and try reinstalling the updaters for itunes and Quicktime. It should work.

Similar Messages

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

Fast Start Quicktime Movies Wont Work

I dont know why Fast Start Quicktime movies wont work in iWeb. This exact same file I used in a site I created using Dreamweaver began the movie as soon as it reached a point where the entire movie could be viewed. Why not in iWeb?
http://catchthemoment.net/simpsons/simpsons/Valentines.html
iMac G5 Mac OS X (10.3.9)

For whatever reason, iWeb publishes the quicktime movies with the autostart attribute at "false". To enable autostart, you will need to edit the html file after publishing and set the autostart attribute to "true". Even though autostart may have been enabled within the movie encoding process ("in the file"), I believe that this property is allowed to be overridden by the html attributes within which the file is published.
There is a table of all the attributes that can be changed floating around here somewhere. Keep in mind that these post-publishing changes that you might make will be overwritten in any subsequent changes that you might make to the page within iWeb.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

Flash player 11.5 updated using ie8 and firefox wont work Youtube

Flash player 11.5 updated using ie8 and firefox wont work Youtube
Its impossible because after the update i researched and did alot to downgrade and it wont work.
Only domain administrators can play youtube movies. the other simple users cannot play it they get a black screen please i need some clear professional instructions because its not working Youtube

How do I fix Windows permission problems with Flash Player?
http://forums.adobe.com/thread/987370

Updateing movies in itunes then movie wont work???

hi there can anyone help me with this promlem!
when i try to change the name or put the artwork on some of my movies in itunes, it wont do it then the file/movie wont work??
does anyone know what the problem is?
any advice would be great.

Whilst I'm not absolutely sure what happens to the macroblock count when using the anamorphic flag, plain old mpeg4 does have low limits compared to AVC and I suspect you may be exceeding the mpeg4 resolution limit of 720 x 432. I feel that if you were to use AVC rather than mpeg4 your problem may well disappear. Your encoding times will increase, but so will your quality, mpeg4 at 1500 kbps is not really the best quality. Think of mpeg4 quality being half that of AVC at the same resolution, so your output quality is equivalent to AVC at 750 kbps, I use AC at 2500 kbps and many go even higher.

When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod.

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?

I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?
I recently bought a Samsung Galaxy S4, and my wife has an iphone. We found out that imessage wont come through from her. After we went to the AT&T helpdesk they said that she could turn off imessage on her phone and that I would get texts on my S4. But then so would everyone else who has an iphone. That won't work for everyone in my company that has an iphone. So what I am wondering is- since I recently got this phone, should I get a new number? Or should I contact ATT or contact Apple to try and get this number de-activated? I'm thinking I'll never get into the icloud account that this number is attached to, but maybe someone has some advice on that?
I just sincerely want imessage to work on this phone and I'm willing to take the steps to do that.
Please help

Either one of the two should work - getting new number from carrier or contacting Apple to revoke phone number from imessage system.
That is if your problem is described correctly.

I have windows 7 and EasyLink wont work neither will 192.168.1.1

I have windows 7 and EasyLink wont work. Now I tried the 192.168.1.1 and even that wont work! I have a WRT54GS and I know it works because when I usee the two laptops connected to it, it works perfectly except when too many users get on my wifi connection then it overloads

I'd suggest trying a factory reset, that should clear any password that was set and forgotten, as well as any settings that are preventing you from talking to it (like the router address having been set to something other than 192.168.1.1).
There's usually a recessed reset button on the back that is accessed via an "unrolled" paperclip. Just press that button and count to about 30, and then wait until the router comes up again and try the 192.168.1.1 address.
If you have a cable modem, then I'd suggest that you write down the MAC address of the primary computer that was used to configure the router, and then try changing the MAC address on the router to that when you get back in touch with it (via the 192.168.1.1 web GUI). The factory reset may change the router back to it's original MAC address, which may prevent your cable modem from being happy.

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

If you have Apple care and the problem occured without misuse on your part ... it can be replaced without charge.

I bought a redeem card and it wont work is says that the gift certificate or prepaid card you entered has not been properly activated

I bought a redeem card and it wont work is says that the gift certificate or prepaid card you entered has not been properly activated

You will need to contact the iTunes Store.

Keyboard and mouse wont work unless booted in safe mode.

So my keyboard and mouse wont work at all when i start up normally, so i coudnt even log on, then i tried safe mode and i was able to use the mouse and keyboard and log in, then when i loged in i got some messages:
*+System extention cannot be used+*
+The system extention "/system/library/extentions/IOUSBFamily.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products vendor for an update.+
And 2 others: MicrosoftMouse.kext and msdosfs.kext
Im pretty sure how i got this problem, i was using bootcamp and i got this program called MacDrive (bad Idea)and it corrupted my HD or something so i had to use disk warrior to fix it. I also used disk utility in safe mode but there were no errors it said.
and this is probably a hardware problem but i cant use DVD's anymore, my drive will only read CD's now, must be broken....
so ya, i dunno what to do exept get my drive fixed and to a backup and reinstall OS...

Hi
There are no many options which could solve this problem.
It can be a hardware problem or software related issue.
Can you use the internal keyboard within the BIOS?
Check this.
If this would not be possible, I assume the hardware is faulty.
Additionally I recommend testing the keyboard and touchpad using the factory settings.
Recover the notebook and check if the keyboard would functions. Otherwise you will need an helps from an notebook technician in order to replace the keyboard and touchpad

I plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen

i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
I tried just holding down the power key...NOTHING

Do a reset, hold down the home/sleep button together until you see the apple logo and then release.

My iWeb Account wont update it says Can't create the file "mwmac_white.png." The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend I deleted other sources on website and still wont work? Suggestions?

My iWeb Account wont update it says Can’t create the file “mwmac_white.png.” The disk may be damaged or full, or you may not have sufficient access privileges... This has never happend I deleted other sources on website and still wont work? Suggestions?

Welcome to Apple Support Communities.
This is the image contained in the file causing the problem...
I certain the original is contained in the Combo updates and on the OS disks.
As a temporary fix, click on the image above to open it.
Use Screen capture (Shift+Command+4) and click on the opposite corners of the image.
It will be saved as a Screen shot 2011-mm-dd at hh:mm.png
Right click on the filename in Finder and rename it to mwmac_white.png
I'm not certain, but the file might need to be moved into the Documents directory in the Subdirectory named for the website name you are editing. That's where it is on my system, but I moved a bunch of files when I restored from Time Machine about 18 months ago.
I also have many copies of mwmac.png, a separate copy one for each web page where the image appears in my website.

Why my map dosent show the addresses completly? it just shows the name of the city or in the best way the name of expressway (no matter how much i zoom in)and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

why my map dosent show the addresses completly? it just shows the name of city or in the best way the name of exxpressway and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

Mpg and mov wont work

Similar Messages

Maybe you are looking for