MPG Conversions - Not going too well

One of the things I wanted to do with my Ipod was be able to show some of the movies I've made. To date the format that the movies are in is MPG (technically mpg2). After purchasing Quicktime in addition to the MPG2 conversion module (yes, I'm very happy about that one), Quicktime has never not crashed when doing the MPG2 to Quicktime Ipod format conversion. Are there any special steps, settings/procedures, folks to contact to convert to the proper format. Or more importantly, are there other products that I can use to get my movies onto my Ipod.
Using Sony Movie studio.
Thanks.

Look at Videora iPod Converter. Using QuickTime to
do anything is like using a razor blade to cut sheet
metal.
Heeded your advice and downloaded it late last night. Was able to to the conversion in about 2.5 mins. That was about three minutes before Quicktime usually choked and aborted. Many thanks and I liked your analogy. Could make it a rusty razor blade.

Similar Messages

First time conforming - Not going so well.

Hello All,
I'm attempting to bring audio mixed through STP back to FCP, and things are not going so well.
A few days ago I used the "send to" function, and sent my FCP production to STP. I've spent the time since adjusting volume, fading, removing pops, etc. I'm now trying to conform, or return the mix back to the original FCP production. It's not working. I've taken a few Lynda.Com tutorials, and I seem to be doing things right.
Two things I notice:
1. I notice that the original position and the resulting position all read 00:00:00:00
2. When I return to FCP, there is no mixed track as shown in the tutorials.
I suppose there are a couple questions here, but the main one I have is whether I can link the FCP production that has not been adjusted after the original export with a STP new and improved mix...even if that original link is gone.
Thanks for your insights.

Thanks Wes.
A combo of your sage advice and the recognition of my personal lameness got me over the hurdle - Once Again!
Cheers.
DG

Hello, i have received an ipad and it is not going to well. i will be charging it for 5 hours and when i unplug it, it says it is still not charged. anybody know what is going on?

hello, i have received an ipad and it is not going to well. i will be charging it for 5 hours and when i unplug it, it says it is still not charged. anybody know what is going on?

Same problem for me.
1. Cannot connect to wifi as icloud password pop up keeps appearing.
2. tried deleting account. UNable to do so.
3. tried resetting password by logging into apple id through desktop as mentioned in one of the responses in another thread. Unfortunately the apple id to be reset is the same as being prompted by icloud and hence unable to reset the same.
Feel like breaking the **** ipad into bits. Stupid of apple to let such a bug in and not offer support !!

Exporting from FCP to STP not going so well

Hello All,
I've been working between FCP and STP, sending the audio over to STP for a better mix.
Things have been going pretty well, although the feature of having the export back to FCP and automatically drop in the timeline doesn't seem to work. I do like the greater degeree of control via STP.
Anyway, I am attempting to send another multi-track file over to STP. I'm attempting to do this from the timeline, and not from the browser. To accomplish this, I select all, then choose send from the file menu, etc.
The following is happening:
1. The file send reads, "Exporting XML Data"
2. Then it stops, and a new message reads, "Error sending selection to Soundrack Pro"
Any ideas what might be happening. Is it merely a preference trash in order?
Thoughts.
Thanks.
DG

Okay,
I need to know. Is it my questions, or is this group restricted to FCP internal issues only. I'm always amazed that 25 people have viewed this type of question, but the wealth of experience doesn't toss just one pearl of wisdom.
I think this is FCP related, but perhaps the exporting closes the door on interest.
Let me down gently, as I'm fragile
DG

Evaluation of Nitrox Not Going So Well

empty

Hello Jack,
You can always choose to open a file with the NitroX Editor by
right-clicking and choosing "Open With" -> "NitroX Editor".
NitroX does its best to peacefully co-exist with other plug-ins and
therefore does not force itself to be the default editor when it is
installed.
You can set the default editor for your JSP or Struts configuration files to
the NitroX Editor by using Eclipse Preferences.
From the main menu of Eclipse open Window -> Preferences and choose the
Workbench -> File Associations subcategory. Select *.jsp or *.xml files and
you should see NitroX Editor in the list of associated editors. Click
Default to make it the default editor and then click OK to save your
changes.
We hope that the rest of your evaluation goes more smoothly, but do not
hesitate to request assistance either via this newsgroup or for a more rapid
response, via [email protected]
M7 Support
"Jack Frosch" <[email protected]> wrote in message
news:41114603$[email protected]..
Let me amend this statement:The struts-config.xml editor is just the generic text editor, too.
The struts-config.xml editor is just the generic text editor, too after
MyEclipse complains that "Project 'Temp' is not configured as a
"MyEclipse Web-Struts" project.
Clearly it would seem that Nitrox didn't win the plug-in battle with
MyEclipse for whose editor would be used to edit the application.
To further my evaluation, I removed the MyEclipse plug-in link from the
Eclipse links directory and am now seeing the JSP pages properly.
However, struts-config.xml was just using the default text editor.
I set the Workbench file association for struts-config.xml to the NitroX
XML editor and now get some added functionality, but really want to see
the Compound Editor. However, it's not listed as one of the registered
editors.
I tried reinstalling, but didn't notice a change with the
struts-config.xml file.
Any idea on how I should correct this problem?
Thanks.
Jack

Reinstall not going so well

I have a dual USB iBook G3 14" screen. It came with Jaguar and I had it upgraded to 10.3.9. Lately it has been hanging with EVERYTHING. It would hang while opening iPhoto, or it would hang just booting up, it would hang while shutting down, all kinds of random hangs. Hardware test said no problems, which surprised me, but so I decided to try reinstalling the OS. I have the software install and restore discs for 10.3.3, so I ran it under 'basic install'. It gets to the part where it is installing languages, (still on the first disc), and then the computer shuts off completely with no message. If I restart it with the disc in, it just offers to begin at the beginning of the installer again. If I restart it with the disc out, I get the blinking mac/question mark folder icon. What does this mean and what should I do next?

Don't worry, I bought and paid for the 10.3.3 discs, they are not bootlegs, they are the full retail version. I used them before, when I originally upgraded from Jaguar. The hard disc was about half full (14 out of 28 MB, I think it was). Here's the latest progress I have made: ignoring the old saying that 'a person who repeats the same actions expecting different results is insane', I agreed with the install disk to proceed with installation again, in spite of having already done this. Again it got nearly through the disc 1 install and shut right down (need I say, it was plugged in to AC power the whole time), and this time I couldn't restart it at all. So I reset the PMU. It then turned on again, but still it either flashed the question mark, or if running off the discs, merely offered to start a new install once more. So for a third time I agreed to basic install. This one made it all the way through, and restarted as a brand new computer, asking me to register and the whole bit. It is puzzling to me though, that if it has wiped out all previous data and OS, why does it still show only about 14 out of 28 MB free? Surely the OS 10.3.3 doesn't take up that much hard drive? Before I poke around in there too much and then upgrade to 10.3.9, does anyone have any thoughts on what is happening here? Thanks!

Install flashplayer 10.2 not going so well

While attempting the install, I receive prompt that "the application is already installed". but when I try to watch video
, I am prompted that I need to install the newer version of flash player (and videos do not play)
. I have uninstalled and received promt that I have completed the uninstall of older version.
so I don't understand why I am stuck...thanks for your help

thanks, Windows Vista Home Premium and IE9 (although I recently download IE9, my computer has acted more slowly and I do not like IE9) The reason I downloaded Internet Exploer 9 was that the system prompted me that in order to run the newest version of Adobe flashplayer (10.2 I believe) I needed
to upgrade IE. Its been downhill ever since, though I am learning a lot
Control Panel shows that Adobe Flashplayer 10.2 is installed in my Programs. Still when I go to play video, I am prompted that I still need to install it. I have restarted browser as well as restarting computer. still no good.
P.S. I am not certain what you mean by listing (ALL?) the files in C drive...
Message was edited by: PLZhelpme789

Text search in Mail not behaving too well...

A powerful function in mail is the search loop. However since switching to Lion, I have noticed that it does not work for all words. This may have nothing to do with Lion and simply be that I only notice it now, but I know a word is in a few emails and when I type that in.. they do not list at all... with other words it does seem to function....
Appreciate any help with this...
Info:
I have a huge inbox which I am now splitting into years but should probably archive.... next step?
the word we wer looking for was Dutch but I assume that has diddly to do with this.

First, follow all the instructions in this support article. If the problem isn't solved that way, see below.
Boot in safe mode. This will cause certain caches maintained by the system to be rebuilt.
Safe mode is much slower to boot than normal.
When the login screen appears, reboot as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

4.0 does not work too well...

Since downloading 4.0, I've had lots of problems with page loading, Trackpad gestures, scrolling. having to click a new page to make it active, pointer does strange things on any page and a host of other minor but none the less irritating issues.
I've had to revert back to 3.6.16 to get the browser to work again.
Sorry but I've gone back to using Safari as my default browser until these issues with 4.0 can be resolved.

Repeated clearing of the history and cache seems to have cleared up the problem. I still do not know why it reacted that way though.

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or are they NOT GOING TO?!

Hi everyone, I am trying to find out WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or if they are not going to do this at all.
I hope someone from Adobe Illustrator reads these forums and responds. There is an existing thread that has no official response from Adobe, and it has literally tens of thousands of views!? Please Adobe Illustrator, can you give people the official response they need so they can plan their workflow.
Apparently Affinity Designer is going to be adding a Rotate View Tool shortly and their app is only $50 one-off payment too, so perhaps you ought to respond before other people start making the switch? The rotate view tool is something illustrators really need, we already have it in Manga Studio, and it makes life so much easier. You can't really draw on a CINTIQ in vector form without it, at least not as well as you should be able to.
Can you please update your paying customers so we can make an informed decision.
Look forward to receiving a response.

Tell Apple
Apple - iTunes - Feedback

UOM conversion not big enough

Hey All,
I have a strange requirement. The numerator field UMREZ for UOM conversion is of 5 digits, which means the max value can be 99999. We have a need to do a Alterante UOM conversion which is greater than 5 digits.
Example: 1 PAL = 200000 EA.
How do I acheive this?
We are looking into all possible options.
First is thru config to create an intermediate UOM so that we can do two UOM conversions and acheive our result, but this is also going to be a big change.
Is there any other option through code to increase the length of this field, or any other alternative.
I tried searching and looking for OSS notes, but no luck.
Any input is highly appreciated.

Thank you for your replies. For a moment I thought this might be an option, but the problem here is not that the quantity is too large. but that the conversion factor is too large.
Let me explain again.
I have one unit which has the following conversion.
1 Pallet = 3000000 Eaches.
Numerator = 3000000 "here is the problem, numerator field is only 5 digits
Denominator = 1
which means if i get say even 100 pallets as input it have to convert
100 X 3000000/1 = 300000000. "the problem is UMREZ (3000000) is too big for that field
So here i cannot use any preconversion or post conversion.
BUT if i do think in the same line i can try to use a multiplication factor for that particlar unit of measure which i can just multiply at the end. I can maybe look to incorporate this in an enhancement when the UOM conversion is done. But I still have to figure out how to display it in the material master. Let me investigate more into this option.
Any other suggestion as welcome.
Edited by: Aparna Shekhar on Aug 8, 2008 9:23 AM

Torch 9800 missed messages/messages not going through, dropped calls

What is the deal, messages that I send are not going to the recipient, calls are dropped, used my geek squad insurance and have replaced the phone 3 times and got a new sim card too. must be something i am doing or not doing to cause this. Any suggestions?????

Hello Plude
Start with the article below to troubleshoot issues with the cellular connection. It will walk you through checking for carrier updates and also restoring your iPhone as well.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
-Norm G.

MPG Conversions - Not going too well

Similar Messages

Maybe you are looking for