Mplayer has sound, but Smplayer has no sound?

heya,
I have a Lenovo X200 tablet, with Arch64 installed on it.
I have Mplayer SVN-r31040-4.4.3 and Smplayer 0.6.9 (SVN r3447).
Previously, both of these worked fine, However, recently, after a Pacman upgrade, when I attempted to play a movie, Mplayer seems to play the movie with sound, but Smplayer has no sound at all.
I checked the output from Smplayer:
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family'
Debug: MplayerProcess::parseLine: 'Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'ID_VIDEO_CODEC=ffodivx'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Opening audio decoder: [mp3lib] MPEG layer-2, layer-3'
Debug: MplayerProcess::parseLine: 'AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_BITRATE=128000'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_RATE=48000'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_NCH=2'
Debug: MplayerProcess::parseLine: 'Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: '[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy'
Debug: MplayerProcess::parseLine: 'Failed to initialize audio driver 'oss''
Debug: MplayerProcess::parseLine: 'Could not open/initialize audio device -> no sound.'
Debug: MplayerProcess::parseLine: 'Audio: no sound'
Debug: MplayerProcess::parseLine: 'Starting playback...'
Debug: MplayerProcess::parseLine: 'Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.780000
Debug: MplayerProcess::parseLine: 'ID_VIDEO_ASPECT=1.7793'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.779300
Debug: MplayerProcess::parseLine: '[swscaler @ 0xef5ac0]using unscaled yuv420p -> rgb24 special converter'
Debug: MplayerProcess::parseLine: 'VO: [xv] 854x480 => 854x480 Planar YV12 '
From Mplayer, there's a similar thing mentioned
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [XVID] 854x480 12bpp 29.970 fps 963.4 kbps (117.6 kbyte/s)
Clip info:
Software: MEncoder Sherpya-SVN-r23404-4.2.0
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 854x480 => 854x480 Planar YV12
A: 87.7 V: 87.7 A-V: 0.000 ct: 0.077 2628/2628 10% 0% 0.7% 0 0
Exiting... (Quit)
Any ideas on what's going on?
Cheers,
Victor

heya,
Aha! That worked .
I changed from OSS to Also, and it works fine now.
Any idea why it changed like that? Could an update have caused it?
Also, there were other ones, like "alsa (0.0 - HDA INTEL)" and "alsa (0.1 - HDA INTEL)". Not sure what they were there for.
Cheers,
Victor

Similar Messages

  • Has uploaded but it has not yet launched.

    Hello,
    I am on Creative Cloud, it seems as though Premier Pro (Pr) has installed But when I try to load it up I get the window saying Pr has stopped working.
    I have tryed to update via Creative Cloud (U44M1P7 ERROR), then I tryed an update (as recomended) through the adobe site to no avail.   I have spoken to a Adobe specialist via chat who asked me all the details and I got cut off. 
    I have been trying to sort this out for two days so please help.
    This is what I am Running..
    WINDOWS 7, 64bit, AMD FX6300 SIX CORE PROSESSOR, ASUS EAH6450 GRAPHICS CARD
    Faulting application name: Adobe Premiere Pro.exe, version: 7.0.1.105, time stamp: 0x51cbdef8 Faulting module name: amdocl64.dll, version: 2.4.650.9, time stamp: 0x4ddc7b01 Exception code: 0xc0000417 Fault offset: 0x00000000003a84cc Faulting process id: 0xcf0 Faulting application start time: 0x01cebe87f828fcf3 Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe Premiere Pro.exe Faulting module path: C:\Windows\system32\amdocl64.dll Report Id: 388690c3-2a7b-11e3-84b9-001e101fb681
    Thanks
    Steve

    If you have two graphics adapters (motherboard and card) read the below
    Dual video laptop problems
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-
    graphics-vs-nvidia-optimus-technology/2
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

  • My iphone 4s has no vedio , app sound but i get ringer sound and also calls

    For past 02days I am not getting vedio- apps sound in my Iphone 4s. I get calls and other related voice, sound. how to fix this problem?

    Hi Baileyfour,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    There are two places where vibrations can be set.
    One is the Settings > Sounds
    The other area is Settings > Notifications
    If you have an app set to Alert, it may have a vibration set for it.
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I hope this information helps ....
    Have a great day!
    - Judy

  • Alright so I need help - Pod has music but computer has none

    Alright so here's the 411. My ipod has an approximate 1100 songs on it. My previous laptop broke down so I had to get a new one, with an obvious 0 songs. So iTunes has this lovely feature that likes to duplicate my current library to my iPod. See the dilemna? Well so is there a way that I can keep all the songs on my iPod yet add new ones from my iTunes library now?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Please help iPOD has songs, but iTunes has none...I'm very stupid, HELP!!!

    When I say I am very stupid, I'm serious. I thought I was get more space by deleting the itunes folder under my applications. I thought it wouldn't affect iTunes, cuz when I was delting it, songs were still playing. After I deleted, exclamation points started showing up...so I deleted all of the music in iTunes also. I still have all the songs in my iPOD, but none in my iTUNES. I tried using Senuti but says this... There was an error refreshing the iPod "(null)". The error could be due to the fact that the iPod is being used by Senuti. Please try again in a few seconds. If the problem persists, please report it. Yea, so iPOD rip doesn't work either as after I put my mouse over the songs, they dissapeared. I even re-downloaded iTunes, that didn't do anything...I am really stupid. Please can anyone help me? Again, I have all songs on my iPOD, but none on my iTunes...it was there before, but deleted the iTunes folder to save more space.

    There's a manual method of copying songs from your iPod to your Mac at this link which you could try: Two-way Street: Moving Music Off the iPod

  • No sound on windows 7 ultimate, but it has worked before!

    Hi, I'm using a macbook air  OS X Mountaint Lion (10.X.X <- not sure about those numbers since I'm on the windows 7 atm) and I've tried to install windows 7 ultimate(32-bit) a couple of times, and the very few first times it did work, installing it, and getting the sound and internet, everything working.
    But when I realized I didn't have enough space and had to re-do it, I removed windows 7 again and re-installed it, this happend a couple of times because I needed 50gb, but ended up having about 45 everytime I finished installing windows 7.
    And for some reason I just couldn't open set-up.exe anymore through my USB with the boot camp support software in it. Note, it did work before, but after a few re-installations, whenever I try to open the set-up.exe this is what shows up : This version of this file is not compatible with the version of Windows you're running.
    I mean it has worked before, I did exactly like all the other times, but I did notice one change from the first times and to the times where errors started occuring. It was that when I'm installing windows, I get to choose between windows 7, basic, and all the other ones, including windows 7 ultimate. But the very first times I installed windows it automatically chose Windows 7 Ultimate, I couldn't chose which one I wanted.
    I've tried to install boot camp support softwares through apple's website on the download page, I've tried 4 different and only one, almost worked. I could open the set-up halfway and and then somehow I couldn't install anything, so I decided to try and open all the maps and install the softwares manually, which provided me with internet atleast, some worked some did not work such as Nvidia. But I need the sound! Help me?
    Sincerely Kenny

    You may want to edit your name from screen shots in the future.
    On W7, you have a higher version (6.30.223.215) of the 802.11n driver compared to what I have on W8.1 (5.106.199.1).
    This is from bootcamp.xml file
    <Name>Broadcom 802.11 Network Adapter Driver
    <InfName>bcmwl6.inf</InfName>
    <Class>Net</Class>
    <ClassGUID> {4d36e972-e325-11ce-bfc1-08002be10318}</ClassGUID>
    <CatalogFile>BCM43XX64.CAT</CatalogFile>
    <Provider>Broadcom</Provider>
    <DriverVer>11/13/2012, 5.106.199.1</DriverVer>
    <ServiceBinary>bcmwl5.sys</ServiceBinary>
    <HardwareID></HardwareID>
    <isX64>Both</isX64>
    </Name>
    Can you check the USB that you built with BC Assistant or manually from Bootcamp downloads to see what you have?
    For my model, using System requirements to install Windows on your Mac via Boot Camp - Apple Support, I get Boot Camp Support Software 5.1.5621.

  • I have a Panasonic FZ38 HD camera. I can load and view my hd movies onto iMovie with no problems via my camera or a card reader.  When I try to copy my hd videos from my old Windows pc to my new iMac, the picture speed has doubled but the sound is normal.

    I have a Panasonic DMC-FZ38 HD camera and have lots of hd movie clips stored on my old Windows Pc using Photofun software supplied by Panasonic, which I want to transfer to my new Imac computer.   I am able to copy my most recent movies that are still on the memory card from my camera onto Imovie and view them with no problems at all.  When it comes to copying my old existing hd movies stored on my Windows Pc (and which are no longer stored on a memory card), I discover that when I view them on the Imovie, the speed has doubled but the sound is normal.   In order to transfer my old movies I have copied them back  onto a memory card (SDHC - the same card as previously used) and then put the card back into my camera and then copied them onto my Imac via the camera USB.   I have also used a card reader but get the same result.     If I view the same movie through my camera, or look at it on my old pc, it plays at normal speed.    Does anyone have any ideas as to why this is happening please?

    have you read and watch the Tutorials..? :
    http://www.apple.com/ilife/tutorials/#imovie
    iM is a bit.. iffy, when it comes to the definition, what a 'camera' is. historically, only tape based machines were a movie-camera. nowadays still-cams allow movin' images too..
    but, as mentioned above: the intended workflow is: material from photo cameras (even when they move) => import via iPhoto; material from video cameras (even when they don't move.. ) => iMovie
    when the import is done, you'll notice in all iLife apps the 'media browser' - in iM09, on the very right, the icon with a camera on.. click it, presto, all (incl. your 'videos') your iPhoto Library at hand for usage in iMovie.
    watch this:
    http://www.apple.com/findouthow/movies/imovie08.html#tutorial=otherimport
    (about from midths of tutorial...)

  • Tv has sound but no picture

    My hp tv model # PL5060N has sound but no picture tv is wall mounted

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?
    If the problem persists....
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • My ipad 3 has sound but no picture, what could it be

    My ipad3 has sound, but no picture comes up.  What can it be?

    Press and hold both power and home buttons for about 10 seconds till the Apple logo appears. Then release buttons and wait for your iPad to start

  • My imac has sound but no picture?

    My IMac has sound but no picture? I've tried everything but a hard restart. Anyone else know a solution? Oh by the way, my eight your old son was the last to use it but swears he didn't press anything.

    This is the Mac Pro desktop forum. I requested your post be moved to the iMac forum.

  • 24" new, has picture but NO Sound (ps3)

    just got a new 'Model:24SL41OU' Toshiba 24" tv from best buy today.
    ive hooked up my ps3 to it and it has picture, but no sound
    i have tried
    -resetting ps3
    -unplugging tv for 10 minutes
    -have used both PS3 optical sound output and the regular red/white output. neither setting/cable works
    -went into menu setting, tried different sound settings, but nothing has worked
    i know its not my ps3 since it works on my other tv, so i have no idea whats wrong. im doubting its not a faulty TV since its new, but i have no idea how to fix this no-sound problem. really frustrating...
    anyone know how to fix it?

    What type of video connection are you using?
    - Peter

  • I am trying to open my macbook air but it has blocked and it makes a beep sound.

    I am trying to open my macbook air but it has blocked and it makes a beep sound. It wont turn on. Is there something i can do?

    Assuming this is not the normal startup chime, one beep means no RAM...so something in the path to the RAM has failed.
    Best option is the Apple store genius bar to have the techs test the system and see what is going wrong.

  • After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

    after exporting to quicktime file, the file has sound but no video, what am I doing wrong?  The self contained movie box is not checked.

    Hi
    Did You go via Compressor ?
    Did You use QuickTime Conversion ?
    I don't
    I do
    • In TimeLine set In and Out-Points to the full Movie/Project
    • Select ALL - Clips and Audio
    • Go up to Sequence and down to Render Only - down to Mix Down Audio
    • then Sequense and Render Selected - Both (Video and Audio)
    • then Export and as QuickTime .mov (NOTHING ELSE)
    • I use to do - Not Self-Contained as it saves both time and space
    Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
    Good Luck - Yours Bengt W

  • HT4623 I downloaded the ap Teach yourself photoshop but it has no sound, can anyone help me?

    I downloaded the ap Teach yourself photoshop but it has no sound, can anyone help?

    Turn up the volume once you have the app open

  • TS1702 I have a new iPhone 5 with Pandora app installed.  When I am in my carwhich also has a Pandora APP, I cannot get either to play.  The phone on it's own acts like it is playing my music but there is no sound!  The car does not seem to recognize my p

    The Pandora APP is installed on my iPhone5 &amp; works fine except when I am in my new car that also has a Pandora APP.  The car doesn't seem to recognize the phone so doesn't connect.  My iPhone will act like it is playing Pandora as usual but there is no sound at all when I am in the car.  What do I need to do?

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

Maybe you are looking for